Aldes TO GALVA D355/160 - 45 Degree Galvanized Steel Tee
Reference: 11093239
Product Line: GAMME GALVA
System Type: Rigid Galvanized, Aluminum, and Special Ducts
Product Description
The TO GALVA 45° tee is designed to connect two branches of a galvanized duct system at a 45-degree angle. These fittings are recommended over standard 90-degree tees for supply air systems, ensuring leak-free installation and minimizing pressure loss at the takeoff point.
Application Areas:
- Residential collective housing
- New construction
- Renovation projects
- Tertiary sector buildings
Installation:
- Easy assembly through push-fit connections: ducts are female, fittings are male.
- Sealing achieved using mastic and/or perforated tape.
- Secured to the duct with self-drilling screws (4 to 6, depending on diameter).
Specific Application:
- Connects two duct branches at a 45-degree angle in tertiary and collective ventilation systems.
- Offers superior performance in supply air applications compared to a 90-degree tee.
Technical Specifications
Description: Oblique tee in galvanized steel
Diameter: 315/160 mm
Key Features:
- Available for diameters ranging from 80 mm to 900 mm.
- Manufactured from galvanized steel compliant with EN 10346 standard, ensuring coating regularity.
- Fire classification: MO.
Dimensional Data
Reference: 11093239
Diagram:
A visual representation shows a 45-degree oblique tee fitting. The main duct has a diameter labeled 'Ø A', and the branch duct has a diameter labeled 'Ø B'.
Dimensions:
| Reference | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11093239 | 355 | 160 |
Regulatory Data
Reference: 11093239
Fire Classification: MO
