Whirlpool WRX38RWH6 WRX42RWH6 Top Mount Refrigerator Service Manual

Product Specifications

Electrical Specifications

Circuit Diagram

The circuit diagram illustrates the electrical connections for the refrigerator. It shows components such as the defrost heater, thermostat, bimetal, thermal fuse, fan motor, timer, compressor, and overload protector. Wire colors like grey, pink, brown, red, white, yellow, sky blue, blue, black, white/black, orange, and purple are indicated for connections.

Service Access

To remove shelves in the freezing compartment: First remove the icemaking moulds. Tilt the shelf up at the front, then lift it up and pull it out of the tracks.

To remove the bio deodorizer: Push the front end knob downwards to disengage it.

To remove shelves in the chilled compartment: Lift up the cover. Push the cover to the right until the mounting hook (1) disengages, then disengage the other mounting hook (2) and pull out the cover. Pull the shelf forward until it stops, then lift it up and pull it out.

To remove shelves in the refrigerating compartment: Hold the shelf by the front and pull it forward off the rack.

To remove door bins: Push the bin to the left, then lift it up to disengage.

To remove storage drawers and covers: Lift up to remove the cover. Pull the drawer halfway out, then lifting it up, pull it out completely.

Servicing Freezer Compartment

1. Remove the freezer contents.
2. Clean and dry the evaporator cover handles.
3. Push the handles down simultaneously and pull the panel forward.
4. Disconnect the wiring harness plugs and remove the evaporator cover assembly.

Note: It may be necessary to grip the vents with smooth-jawed pliers.

Servicing Refrigerator Compartment

1. Remove the chiller door and tray.
2. Lift and push the cover until the mounting pin (1) disengages. Disengage the other mounting pin and remove the door.
3. Pull the tray forward to the stop and then lift and pull the tray clear.
4. Remove the shelves by lifting the front of the shelf and pulling the shelf forward.
5. Disengage the hooks on the lamp cover.
6. Replace the lamp and reassemble by reversing the procedure.

Exploded View - Freezer Compartment

This diagram illustrates the components of the freezer compartment. It features numbered parts from 1 to 26, including ice cube moulds, trays, covers, evaporator assembly, motor, fan, heater, thermostat, and wiring harness.

Parts List - Freezer Compartment

Exploded View - Refrigerator Compartment

This diagram shows the components of the refrigerator compartment. It includes numbered parts from 1 to 20, such as chill room trays, covers, shelves, vegetable crisper, damper assembly, carbon filter, and lamp holder.

Parts List - Refrigerator Compartment

Exploded View - Door Parts

This diagram displays the components of the refrigerator doors. It features numbered parts from 1 to 15, including the freezer door, guards, stoppers, dairy lid, dairy case, egg tray, guards, and bottle guides.

Parts List - Door Parts

Exploded View - Cabinet and Unit Parts

This diagram presents an exploded view of the refrigerator's cabinet and internal unit parts. It shows numbered components from 1 to 27, such as upper and lower hinges, drain water tray, switch-door, junction case, timer, capacitor, compressor, overload cutout, start relay, covers, clamps, dryer, grommets, castors, and absorber trim.

Parts List - Cabinet and Unit Parts