Whirlpool Microwave Oven Exploded Parts Diagram
This document presents an exploded view of a Whirlpool microwave oven, illustrating the assembly of its various components. Each part is identified by a unique alphanumeric code for service and identification purposes.
Overview of Components
The diagram displays the microwave oven disassembled into its constituent parts, allowing for clear identification and understanding of how the appliance is constructed. Key assemblies and areas shown include:
- Door Assembly: Components related to the oven door, including glass panels, frames, and seals.
- Control Panel: The interface for operating the microwave, featuring buttons, displays, and associated electronics.
- Main Cavity and Chassis: The internal structure and outer casing of the microwave.
- Turntable Mechanism: Parts responsible for rotating the food inside the oven.
- Electronic Components: Various electrical and electronic parts such as transformers, circuit boards, and wiring harnesses.
- Outer Casing and Panels: The external housing and protective covers.
Component Identification List
The following is a list of identified components and their corresponding labels as shown in the exploded view:
- A01: Main Oven Cavity/Chassis
- B02, B03: Base components / Feet
- C01: Control Panel PCB / Main Control Board
- C02: Control Panel Button Array
- C07: Rotary Knob / Selector
- C08: Mounting Bracket / Clip
- C09: Small Electronic Component / Connector
- C10: Button / Switch
- C13: Control Panel Housing / Frame
- C14: Display Unit / Screen Housing
- C18(1), C18(2): Small Brackets / Clips / Fasteners
- C20(1), C20(2): Control Panel Buttons / Keypad elements
- C35: Small Electronic Component / Filter
- C43: Internal Support Bracket
- D01: Inner Door Glass
- D02: Hinge Component
- D03: Door Frame / Support
- D04: Outer Door Glass Seal / Gasket
- D05: Door Frame / Trim
- D06: Door Glass Retainer
- D07: Door Frame / Assembly
- D08: Door Outer Panel / Trim
- D09: Door Frame / Seal
- E01: Transformer
- E02: Cooling Fan Assembly
- E04: Wiring Harness Connector
- E05: Main Power Board / Control Module
- E06: Terminal Block / Connector
- E07: Fuse Holder / Fuse
- E10: Capacitor
- E11: Resistor / Electronic Component
- E13: Terminal / Connector Block
- E16: Wiring / Cable
- E28: Terminal / Connector
- E29: Mounting Bracket / Support
- E35: Wiring Harness / Cable
- F01: Front Fascia / Display Panel Assembly
- G03: Grounding Strap / Wire
- L01: Interior Light Bulb / LED
- L02: Light Socket / Holder
- L03: Small Lamp Component
- L04: Lamp Retainer / Mount
- T01: Turntable Motor
- T02: Turntable Motor Coupling / Shaft
- T03: Turntable Support Ring
- T04: Turntable Support Rollers (implied, often part of the ring assembly)
- W02: Internal Shielding / Bracket
- W03: Wiring / Cable Assembly
- W08: Top Outer Casing / Cover
- W09: Bottom Outer Casing / Base Plate
- Z24: Rear Ventilation Cover / Panel
