Kohler Underscore® Rectangle Alcove Bath
Model: K-20201-RA
Dimensions: 60" x 30"
Features
- Convenient 19" step-over height, same depth as a standard 21" bath.
- Integral lumbar support.
- Slotted overflow allows for deep soaking.
- Integral apron creates a clean, finished look.
- Integral flange helps prevent water from seeping behind wall and simplifies alcove installation.
- Textured bottom surface.
Material
- Acrylic.
Installation
- Right drain.
- Requires K-7271 or K-7272 Clearflo slotted overflow bath drain (sold separately).
- Alcove installation.
Required Products/Accessories
- K-7271 Brass Slotted Overflow Bath Drain
- K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
ADA
Codes/Standards
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- ADA
KOHLER® Plastic Baths and Receptors Lifetime Limited Warranty
See website for detailed warranty information.
Technical Information
All product dimensions are nominal.
- Installation: Three-wall alcove
- Drain location: Right
- Basin area, bottom: 46-1/4" x 22" (1175 mm x 559 mm)
- Basin area, top: 52" x 24" (1321 mm x 610 mm)
- Weight: 100 lbs (45.4 kg)
- Minimum floor load: 56 lbs/ft² (273.4 kg/m²)
- Water depth: 15-1/2" (394 mm)
- Water capacity: 68 gal (257.4 L)
- Minimum flat for door: 2-3/4" (70 mm)
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
- ADA compliant when installed to the specific requirements of these regulations.
Diagrams
Integral Flange Detail:
A diagram shows the integral flange detail with dimensions: 1-1/4" (32 mm) and 1/4" (6 mm) radius.
Overall Dimensions (Top View):
A diagram shows the top view of the bath with dimensions: 30" (762 mm) width, 60" (1524 mm) length.
Overall Dimensions (Side View):
A diagram shows the side view of the bath with dimensions: 19" (483 mm) height, 20-1/4" (514 mm) length. It also indicates "Lumbar Angle 15°".
Drain and Overflow Detail (Side View):
A diagram shows the side view with drain and overflow details: 2-1/8" (54 mm) from the top edge to the overflow, 2-5/8" (67 mm) from the top edge to the top of the bath, 1-1/2" Bath Drain, and 1" (25 mm) dimension.
Top View with Dimensions:
A diagram shows the top view with dimensions: 60" (1524 mm) length, 14" (356 mm) to the end of the tub, 9" (229 mm) to the overflow, 2-1/8" (54 mm) to the end of the tub, 2-5/8" (67 mm) to the top edge, and 2-1/8" (54 mm) to the top edge.