KOHLER®
Entity® 60" x 32" Alcove Bath with Left Drain
Model: K-26108-LA
Features
- Integral apron creates a clean, finished look
- Low step-over height allows easy entry and exit
- Round overflow
- Integral lumbar support
- Textured bottom surface
Material
Acrylic
Installation
- Alcove
- Integral flange
- Left drain
Recommended Products/Accessories
- K-7213 27" Cable Bath Drain
- K-7214 27" Cable Bath Drain
- K-11660 Bath Drain
- K-23726 Drain treatment
- K-23732 Tub & shower cleaner
Diagram Description
The bath is a 60" x 32" alcove model with a left drain. The overall dimensions are approximately 60 inches (1524 mm) in length and 32 inches (813 mm) in width, with a height of 17 inches (432 mm). It features a round overflow and integral lumbar support angled at 22 degrees. The internal flange detail shows a 1-1/4 inch (32 mm) opening with a 1/4 inch (6 mm) radius. The bath drain is 1-1/2 inches, and the water depth is 9-1/8 inches (232 mm).
Codes/Standards
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- ADA
- ICC/ANSI A117.1
ADA compliant when installed to the specific requirements of these regulations.
Warranty
KOHLER® Plastic Baths and Shower Bases Lifetime Limited Warranty. See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Color | Code | Description |
---|---|---|
White | 0 | White |
Technical Information
All product dimensions are nominal.
Specification | Value |
---|---|
Drain location | Left |
Basin area, bottom | 45-1/16" x 24-3/8" (1145 mm x 619 mm) |
Basin area, top | 53-1/16" x 26-3/8" (1348 mm x 670 mm) |
Weight | 61 lbs (27.7 kg) |
Minimum floor load | 36 lbs/ft² (175.8 kg/m²) |
Water depth | 9-1/8" (232 mm) |
Water capacity | 40.6 gal (153.7 L) |
Minimum flat for door | 2-15/16" (74 mm) |
Notes
- Measure your actual product for rough-in details.
- Install this product according to the installation instructions.
- The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
- ADA compliant when installed to the specific requirements of these regulations.