Phocos PSW Series Pure Sine Wave Inverters

Introduction to the PSW Series

The Phocos PSW Series represents a new generation of mobile AC power systems. These inverters efficiently convert DC voltage to AC voltage, providing power for various AC consumers. Equipped with LEDs for status indication and fault analysis, the PSW inverters offer user-friendly operation. It is crucial that the power demand of your connected devices does not exceed the inverter's rated capacity. Please read this manual carefully before installation and use.

Key Features

• Pure sine wave output (THD < 3%)
• Selectable output frequency (50/60 Hz)
• Fully isolated input and output
• High efficiency (84-94%)
• Capable of powering inductive and capacitive loads during startup
• Dual-color LED indicator for operational status
• Load and temperature-controlled cooling fan
• Advanced microprocessor technology
• Energy saving modes
• Comprehensive protection features: input undervoltage alarm & shutdown, overload, short circuit, input overvoltage, overtemperature
• 5V, 2.1A USB output port
• Remote shutdown capability with compatible Phocos charge controllers (CXNsolid and CMLsolid)

Safety First

Always prioritize safety. This manual contains essential safety precautions for installation and operation. Ensure proper ventilation and avoid covering the inverter's vents. Never install the unit in confined spaces without adequate airflow to prevent overheating. Use only undamaged cables of appropriate thickness. Avoid installing in areas with flammable materials or where ignition sources are present. For detailed safety guidelines, refer to the relevant sections within this manual.

Support and Resources

For further assistance or to access additional resources, please visit the official Phocos website at www.phocos.com.