HiBy R1 Quick Guide

Buttons and Ports

The HiBy R1 features the following buttons and ports:

• ① 3.5mm Headphone Jack: Supports CTIA standard line control, but not MIC.
• ② Type-C Interface: Supports USB DAC OUT. A dedicated cable is required and can be purchased from official stores.
• ③ MicroSD Card Slot: Supports up to 2TB.
• ④ Hanging Rope Hole: For attaching a lanyard.
• ⑤ Power Button: Click to turn on/off the screen, long-press to turn on/off the device.
• ⑥ Volume +
• ⑦ Volume -
• ⑧ Play/Pause
• ⑨ Next Song

HiBy Music App

The R1 works best with the HiBy Music Android/iOS app. It supports WiFi music transfer, allowing you to transfer songs from mobile phones, computers, and tablets to the R1 via a shared WiFi. The HiByLink remote control function connects to and controls the R1 via mobile phone Bluetooth, enabling you to change tracks, select songs, and manage playlists remotely. Scan the QR code to download the HiBy Music app.

Wireless Connections

• WiFi: Supports 2.4GHz WiFi for streaming music, internet usage, music transfer, HiByLink remote control, and DLNA/LAN music connection using the HiByMusic app.
• Bluetooth: Supports Bluetooth 5.1 and high-definition Bluetooth protocols like LDAC and aptX.

Firmware Upgrade

1. OTA Online Upgrade: Connect to WiFi and navigate to System Settings > System Upgrade > Network Upgrade to update to the latest firmware.
2. MicroSD Card Update: Download the appropriate firmware from www.hiby.com, import it to a MicroSD card, insert the card into the device, and navigate to System Settings > System Upgrade > MicroSD Card Upgrade.

Other Functions

Hardware Reset/Force Reboot: Hold the power button for over 10 seconds to reset or reboot the player.

Important Notes and Cautions

• Do not repair, disassemble, or place the product in a place with water.
• When the product is not used for a long time, periodically charge it to ensure battery life.
• Charging with a charger with too high voltage may damage the device. Please use a recommended charger.
• If the battery is replaced improperly, there is a risk of explosion. Only use the same type or equivalent type of battery for replacement.
• The battery (battery pack or assembled battery) must not be exposed to heat such as sunshine, fire, or similar overheating environments.
• If using a power adapter, ensure it is CCC certified and meets standard requirements.
• When using headphones, external environments may not be audible. For your safety, avoid using headphones in dangerous environments.

Contact and Support

HiBy Official Direct Sales Store (Tmall): https://hibysm.tmall.com

HiBy Official Direct Sales Store (JD.com): https://mall.jd.com/index-852084.html

Customer Service Hotline: 400-8820-032 / 0086-769-23182216

Official Website: www.hiby.com

Email: service@hiby.com

Manufacturer: DONGGUAN SMARTACTION TECHNOLOGY CO.,LTD.

Address: Room 1201, Lianjing Commercial Building, No.39, Hongwei 3rd Road, Nancheng District, Dongguan, Guangdong, China

WeChat Official Account: [WeChat Logo/Icon]

Sina Weibo: [Weibo Logo/Icon]

FCC Information

RF Exposure Information: This device meets the government's requirements for exposure to radio waves. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits (1.6 W/kg) for an uncontrolled environment. To avoid exceeding FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 10 mm during normal operation.

FCC WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement.