Insta360
Bullet Time Selfie Stick 2.0
Specifications
- Minimum Length: 29.7cm (11.7in)
- Maximum Length: 120.6cm (47.5in)
- Weight: 250g (8.8oz)
- Max. Weight Limit: 300g (10.6oz)
How to Use
Selfie Stick Mode
Tighten the knob, mount the camera, and then extend the selfie stick to the desired length.
The process begins by tightening a knob, indicated by lock and unlock symbols, to secure the camera mount. The selfie stick can then be extended to the desired length, as shown by an arrow indicating extension.
Bullet Time Mode
Step 1: Loosen the knob, extend the stick until the red indication mark on the Bullet Time Component is completely exposed, then tighten.
A diagram illustrates extending the stick until a red mark on a component is fully visible. An arrow shows the extension process.
Tip: To retract the Bullet Time Component, loosen the knob and shorten the stick.
Step 2: Hold the handle of the selfie stick and rotate the Bullet Time Component until it aligns with the desired notch in the angle ring (65°, 75° or 90°), then insert and snap into place.
An illustration shows the Bullet Time Component being rotated to align with notches on an angle ring, with options for 65°, 75°, or 90° angles indicated.
Step 3: Mount your camera onto the selfie stick and turn it until one of the lenses is aimed squarely at the ground and the other is facing directly upwards. Then extend the stick to the desired length.
A diagram depicts a camera mounted on the selfie stick, with arrows showing the lens orientation: one aimed at the ground, the other upwards. The stick is shown extended.
Step 4: Set your camera to Bullet Time Mode, then grip the handle tightly and swing the selfie stick in a circular motion at a consistent speed. One rotation per second is recommended.
A visual shows a hand gripping the selfie stick handle, with a circular arrow indicating a smooth, consistent swinging motion for bullet time effect.
Notes
- When using Selfie Stick Mode, do not loosen the knob to extend or retract the Bullet Time Component.
- Only use Bullet Time Mode with Insta360 X series cameras, and ensure the camera is securely connected to the selfie stick before using the feature.
- This selfie stick can be used in fresh water, but cannot be used in salt water. After using it in water, shake out all excess water via the drainage hole in the bottom of the selfie stick. Leave it in a cool, dry area to dry thoroughly before using it again.
- This selfie stick provides three different Bullet Time angles: 65°, 75° and 90°. The lower the angle, the better the view, but the invisible selfie stick effect will become harder to achieve.
- When using the selfie stick on a beach, avoid getting sand in the rotating gear and hinge. If sand does get into the selfie stick, clean thoroughly before using Bullet Time.
- Ensure that the bullet time component is completely extended and the red indication mark is visible before using Bullet Time Mode in order to prevent damage when swinging the selfie stick.
- The 1/4-inch screw port at the bottom of the selfie stick can connect with a tripod or Selfie Stick Wrist Strap. Do not install on vehicles for use while in motion.
Disclaimer
Please read this Disclaimer carefully. Using this product means that you acknowledge and accept the terms of this disclaimer. By using this product, you hereby acknowledge and agree that you are solely responsible for your own conduct when using this product and any consequences thereof. You agree to use this product only for proper and lawful purposes. You understand and agree that Arashi Vision Inc. (hereinafter referred to as 'Insta360') accepts no liability for any and all misuse, consequences, damages, injuries, penalties, or any other legal responsibility directly or indirectly incurred by your using this product and associated accessories. Before every use, make sure that your accessories are functioning properly. If there's any damage or irregularity, stop using them immediately. Within the scope of state laws and regulations, Insta360 reserves the right of final explanation and revision for the commitment.
After-Sales Service
The warranty period of the attached product is 3 months from the original retail purchase. Warranty service may vary according to the applicable laws of your state or jurisdiction. For detailed warranty policies, please visit https://insta360.com/support.