Camera Bubble Machine - Model 43545612
Instruction Manual
Important Safety Information
Please read all instructions carefully before operating the Camera Bubble Machine. Failure to follow these guidelines may result in product damage or personal injury.
- This product is intended for indoor use only.
- Keep the electrical components and power adapter away from water and moisture.
- Adult supervision is required when children are using this product.
- Use only the provided power adapter. Do not use if the adapter or cord is damaged.
- Do not attempt to disassemble or repair the unit yourself. Contact customer support if issues arise.
- Ensure the bubble machine is placed on a stable, flat surface to prevent tipping.
- Do not point the bubble stream directly into anyone's eyes.
Package Contents
Your Camera Bubble Machine package should contain the following items:
- Camera Bubble Machine Unit
- Bubble Wand
- Power Adapter
- User Manual (this document)
Note: Bubble solution is typically sold separately or may be included in a starter bottle. Please check your specific package contents.
Diagram Description:
A visual representation of the product components shows the main bubble machine unit, which features a prominent lens-like structure on the front. Beside it are the bubble wand, a power adapter with a cable and plug, and this instruction manual. The bubble wand is designed to fit into the machine to create bubbles.
Setup and Operation
Setting Up Your Bubble Machine
- Unpack all components and verify they are present.
- Place the bubble machine on a level surface, away from direct wind or drafts that could affect bubble performance.
- Open the bubble solution reservoir located on the machine.
- Pour bubble solution into the reservoir. Do not overfill.
- Insert the bubble wand into the designated slot within the machine's mechanism. Ensure it is seated correctly.
- Connect the power adapter to the power input port on the bubble machine.
- Plug the power adapter into a suitable electrical outlet.
Operating the Bubble Machine
To begin blowing bubbles, press the power button [power-symbol] located on the side or back of the unit. The machine will activate the fan and rotate the bubble wand, creating a stream of bubbles. The camera-like feature on the front is purely aesthetic and does not function as a camera.
Turning Off the Machine
To stop the bubble production, press the power button [power-symbol] again. Disconnect the power adapter from the wall outlet and the machine when not in use for extended periods.
Maintenance and Care
Proper care will ensure the longevity and optimal performance of your Camera Bubble Machine.
- After each use, empty any remaining bubble solution from the reservoir. Rinse the reservoir and bubble wand with clean water and allow them to dry completely before storing.
- Wipe the exterior of the bubble machine with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the plastic casing.
- Store the bubble machine in a cool, dry environment, preferably in its original packaging, to protect it from dust and damage.
- Never submerge the bubble machine unit or its power adapter in water or any other liquid.
Troubleshooting Guide
If you encounter issues with your bubble machine, consult the table below:
| Problem | Possible Cause | Solution |
|---|---|---|
| The machine is not producing bubbles. | Insufficient bubble solution in the reservoir. | Refill the reservoir with bubble solution. Ensure the bubble wand is properly submerged in the solution. |
| Bubble wand is not correctly inserted. | Remove and re-insert the bubble wand, ensuring it clicks or seats firmly into place. | |
| The machine is not powered on. | Check that the power adapter is securely connected to both the machine and the wall outlet. Ensure the outlet is functional. | |
| Bubbles are weak or inconsistent. | Bubble solution quality may be poor. | Try using a different brand or freshly mixed bubble solution. |
| Fan obstruction or low power. | Ensure the fan intake is clear of debris. Check power connection. |
Product Specifications
Key details about the Camera Bubble Machine:
- Model Number: 43545612
- Power Input: Requires standard household electrical outlet (refer to power adapter for specific voltage requirements, typically 100-240V AC).
- Dimensions: [Approximate dimensions, e.g., 8 x 6 x 7 inches / 20 x 15 x 18 cm - placeholder as not provided]
- Weight: [Approximate weight, e.g., 1.5 lbs / 0.7 kg - placeholder as not provided]
- Material: Durable plastic construction.
Warranty and Customer Support
For information regarding product warranty, returns, or any operational queries, please contact the retailer from whom the Camera Bubble Machine was purchased. Retailers such as Kmart and Target Australia typically provide customer service channels on their official websites.
