Car Rear View Reverse Camera with Dynamic Trajectory
User Manual for CVBS Camera Technology
About Dynamic Trajectory Camera
The dynamic trajectory feature rotates as the car swings, providing guidance that adjusts not just by turning the steering wheel, but also by the car's movement.
Dynamic Trajectory Visualization:
The system displays trajectory lines that adapt to the vehicle's path. Initially, the car is shown with straight trajectory lines. As the steering wheel turns left, the trajectory lines curve to the left. As the steering wheel turns right, the trajectory lines curve to the right. This visual feedback helps the driver anticipate the vehicle's path during reversing.
CAR REAR VIEW REVERSE CAMERA
CVBS Camera
This section details the user manual for the car's rear view reverse camera system.
Outline
Thank you for choosing our products. Please read this instruction manual carefully to ensure proper use. This manual should be kept for future reference.
Important Notes
- This product operates on a 12V voltage system.
- When installing the product, ensure you use the specified drill bits and screws.
- When removing connectors or terminals, do not pull the harness.
- To prevent damage to the camera function, handle the product with care. Avoid strong impacts, improper repairs, or reconstruction.
About Monitor Settings
Before installing the car camera, please confirm that your monitor channel is set to CVBS/NTSC.
To set the CVBS System:
- Navigate to Car Setting.
- Select Factory Setting.
- Choose Reverse (Picture) Setting.
- Select CVBS NTSC.
The monitor settings menu includes options such as:
- HD reversing system
- Display Set (e.g., AHD-1080P-30HZ, AHD-1080P-25HZ, AHD-720P-30HZ, AHD-720P-25HZ)
- Panel Button
- LOGO Setting
- Dynamic LC
- Rest Factor (e.g., CVBS-NTSC, CVBS-PAL)
- Backcar Se
- Radio Setting (e.g., TVI-720P-30HZ)
- Steerwheel
- Other module Setting
Options for configuration include Export Config, Import Config, and Save.
Installation Diagram
This section provides a visual guide for installing the camera and connecting it to the monitor.
A. Monitor Position: The monitor is typically placed on the car's dashboard.
B. Camera Installation Location: The camera is installed at the rear of the vehicle.
Wiring Diagram Note: The red line indicates the wiring path for the camera extension cable.
Rear View Camera Wiring:
If your monitor is an Android DVD or stereo radio, you will need the 6m cable with red trigger wires labeled A and B:
- Wire A: Connect to the reverse lights power source (DC12V+).
- Wire B: Connect to the DVD trigger wire.
Camera Connection Details:
The camera system includes:
- Camera Connector:
- Yellow (Video): Connects via RCA Video Cable to the Camera input on the monitor.
- Black (Ground): Connects to the vehicle's ground.
- Red (12V DC) Power Cable: Connects to the vehicle's power source.
Monitor Connection Details:
- Monitor Power Connection: The monitor requires a power connection.
- Power Cable: A Red (12V DC) power cable is used for the monitor.
Connection Instruction: Connect the positive terminal of the vehicle's Reversing Light to the appropriate power input for the camera system.
