HAUSHOF Carpet Spot Cleaner Operation Manual

Introduction

Thank you for purchasing the HAUSHOF CARPET SPOT CLEANER. This appliance is engineered and manufactured to HAUSHOF's high standards for dependability, ease of operation, and operator safety. With proper care, it will provide years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, read and understand this operator's manual before using this product.

Save this manual for future reference.

Important Safety Instructions

Read all safety warnings and instructions before using this product.

• This appliance is intended for domestic household use only.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• This appliance can be used by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved.
• Children shall not play with the appliance.
• Always disconnect the appliance from the power supply before cleaning or maintenance, and before assembling or disassembling.
• Do not unplug by pulling on the cord; grasp the plug.
• Use only original accessories recommended by the manufacturer.
• Do not use outdoors.
• Children should be supervised to ensure they do not play with the appliance.
• Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• Do not use the appliance to pick up: Dry dust, big plastic bags, metal such as needles/pins, lots of rubbish, large quantities of powder, large quantities of sands and pebbles.
• Do not pick up large or sharp broken objects such as glasses.
• Do not pick up harming or erodent liquids (solvent, corrosive, detergent).
• Do not pick up inflammable or explosive substances such as gasoline or alcohol.
• Do not pick up/vacuum burning or glowing objects (cigarettes, matches, hot ashes).
• The liquid or steam must not be directed towards equipment containing electrical components.
• The filling aperture must not be opened during use.
• The appliance must be unplugged after use and before user maintenance.
• The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
• The appliance shall not be left unattended while connected to the supply mains.
• The appliance is not to be used if it has been dropped, shows visible signs of damage, or is leaking.
• Keep the appliance out of reach of children when energized or cooling down.
• Do not leave the appliance unattended when switched on.
• Do not use the appliance for any purpose other than described in this manual.

Parts Name

Body:

• On/off button
• Handle
• Clean water bucket
• Sewage bucket
• Hose handle
• Watering button
• Hose
• Air outlet
• Power cord
• Power cord bandage

Accessories:

1. Water sucker with brush, for carpet, etc. (Includes suction inlet, brush, water outlet)
2. Right-angled water sucker, for cracks and the back of the chair. (Includes suction inlet, water outlet)
3. Hose hook.

Specifications: 120V~ 60Hz 3.0A 9KPa

Preparation

1. Insert the hose hook into the machine.
2. Remove the clean water bucket from the body.
3. Turn the tank upside down, then open the screw cap and fill with clean water. The maximum water capacity is about 1L.
4. Install the clean water bucket into the body, ensuring the two holes are aligned.
5. Insert the handle into the water sucker.
6. Fix the hose and power cord before handling.

Instructions

1. Plug in and turn on the power.
2. Press the watering button to spray clean water onto the stain. Do not spray continuously at the same spot. After spraying, absorb the water to prevent mildew and odor.
3. Absorb water, spraying clean water while absorbing sewage. Press the water suction inlet onto the stain, bringing the water and dirt to the front and sucking them.
4. Stop spraying and absorb the sewage. After using the cloth on which water is easily retained, blow dry or air dry it.
5. Turn off the power, unplug the unit. Pour away clean water and sewage, and clean the sewage bucket.

For Stubborn Dirt

1. Apply cleaning solvent to the carpet and rub the dirt with a brush to lift it up. Refer to the manual for the amount and usage of the cleaning solvent.
2. Absorb the dirt and do not leave any solvent.

Recommended Detergent:

• Strong alkaline ionized water
• Baking soda
• Citric acid
• Hypochlorous acid
• Water with electrolyte (e.g., water that produces less foam)

Not appropriate:

• Neutral detergent for kitchen use
• Strongly alkaline detergent
• Strongly acidic detergent
• Detergents that produce a lot of foam.

Remark:

• Confirm that the wash solvent does not cause damage to the carpet before use.
• When using detergent, test it on an inconspicuous area of the fabric first to ensure no discoloration.
• Do not use diluents, aniline, chloroform, and flammable solvents.
• Do not spray liquids such as insecticides, hair care products, or lubricating oil.
• Do not use the product to vacuum flammable or combustible substances (e.g., kerosene, gasoline, thinner, copy product toner).
• Do not use the product to vacuum oil, smoke, or steam.
• Do not use the product to vacuum dry dust.
• Do not operate near combustible substances like lit cigarettes or incense sticks, as this may increase the risk of fire.
• Only water (clean tap or recommended detergent) that is 40°C or cooler should be put into the clean water tank.

Attention:

• Do not put cleaning solvent in the clean water bucket. Ensure the solvent is not harmful to the carpet before use.
• For the amount and usage of the cleaning solvent, please read the manual carefully and use it correctly.
• Do not use diluents, aniline, chloroform, and flammable solvents.

Cleaning and Maintenance

Cleaning of bucket:

1. Take out the clean water bucket in the direction of the arrow, unscrew the screw cap, and pour away the remaining water.
2. Install the empty bucket, turn on the power, and press the watering button to remove any remaining water from the machine.
3. Tilt the machine and pour away the remaining water at the bottom.

Cleaning of sewage:

1. When the sewage reaches the maximum water level, stop working and turn off the power. Remove the sewage bucket in the direction of the arrow.
2. Open the upper cover of the sewage bucket and pour away the sewage. Do not tilt or shake the sewage bucket when carrying it, as the sewage may outflow easily.
3. Clean the bucket, upper cover, and sealing strip. Clean the sewage bucket promptly after use to prevent bacteria and smell.
4. Install the sealing ring, cover, and fasten the sewage bucket.
5. Buckle the sewage bucket into the body. Lock the sewage bucket; do not shake it, as this can cause leaks and affect cleaning.
6. Stop using when the water in the sewage bucket exceeds the maximum water level. Clean the sewage bucket; otherwise, the water will flow into the machine.

Maintenance of Water Sucker:

1. After each use, remove the water sucker parts from the body, rinse thoroughly with water, and air dry.
2. Disassemble the water sucker: Press the button and pull out the parts.
3. Disassemble the water sucker cover: Open with a finger and remove it.
4. Install the water sucker cover: Align the pin and hole, then press until a clicking sound is heard to ensure it is in place.
5. When cleaning the water sucker, empty the nozzle if it is blocked.
6. Check the hose for breakage and leakage.
7. Rinse the inlet air sponge and filtering sponge after use, and replace them if they are damaged.

Attention:

• Stop running and unplug the unit before maintenance.
• Do not immerse the machine in water to avoid electric shock.
• Do not use detergent, diluent, benzene, or other chemical agents to clean the machine.

Consumables, Fault and Handling

The consumables can be removed and replaced when damaged or lost. Ensure proper installation and use.

Consumables: Seal ring for upper cover, Inlet air sponge, Filtering sponge, Screw cap.

Environment Friendly Disposal

Disposal of the Appliance:

This product is marked with a symbol relating to the removal of electric and electronic waste. This means it shall not be discarded with household waste but returned to a collection system for recycling or dismantling to reduce environmental impact. Electric and electronic equipment can be hazardous due to hazardous substances.

Disposal of the Packaging:

The packaging consists of cardboard and marked plastics that can be recycled. Make these materials available for recycling.