Vornado TRANSOM Window Circulator Owner's Guide

Introduction

Welcome to your Vornado TRANSOM Window Circulator. This guide provides essential information for safe operation, installation, and maintenance. Please read and save these instructions for future reference.

Contact Information:

• Website: vornado.com
• Customer Service Phone: 800.234.0604
• Email: help@vornado.com

This document is available in English, Spanish (Español p. 14), and French (Français p. 26).

Important Safety Instructions

WARNING: Risk to Children and Impaired Persons

• Supervision is required for children aged 12 and under, and individuals with reduced physical, sensory, or mental capabilities during operation, cleaning, and maintenance.
• Ensure children do not play with the appliance, its parts, or packaging.

WARNING: Chemical Burn Hazard

• Keep batteries away from children. This product contains a lithium button/coin cell battery.
• If swallowed, it can cause severe internal burns and death within 2 hours.
• Always secure the battery compartment. If it does not close securely, stop use, remove batteries, and keep away from children.
• Seek immediate medical attention if batteries are suspected to have been swallowed. Contact the National Poison Control Center (US: 1-800-222-1222, Canada: 416-813-5900).

INSTALLATION WARNING:

• Keep the product away from curtains, draperies, tablecloths, and other fabrics to prevent them from being drawn into the fan, damaging the motor, or causing a fire.
• Do not place near furnaces, fireplaces, stoves, or other high-temperature heat sources.
• Do not use in a window, on an uneven or unstable surface, or near water.
• The appliance, power supply, cord, and plug must not contact water. Do not use on wet surfaces or in bathtubs/showers.
• Do not use outdoors or expose to weather.
• Manage the power cord: Do not run under carpeting, cover with rugs, route under furniture, or place where it can be crimped or closed in doors. Arrange away from traffic areas to prevent tripping. Ensure the cord can be unplugged quickly during emergencies.

SAFE USE WARNING:

• Do not operate with solid-state speed devices (e.g., dimmer switches) to avoid circuit overload, fire, and electric shock.
• Do not operate with a damaged cord or plug. Discard or return for repair.
• Do not operate if dropped or damaged. Do not attempt repairs yourself; use only original replacement parts. Contact Vornado Consumer Service for assistance.
• Use only the provided power cord and plug.
• Ensure the electrical rating on the label is compatible with your outlet's power supply before plugging in.
• Never use the cord as a handle or yank/strain it.
• Do not insert foreign objects into openings while the product is plugged in.
• A loose wall outlet fit may cause overheating and plug distortion. Discontinue use and contact a qualified electrician.
• The appliance has a polarized plug (one blade wider than the other) designed to fit only one way in a polarized outlet. If it doesn't fit, reverse the plug. If it still doesn't fit, contact a qualified electrician. Do not defeat this safety feature.
• Always turn off and unplug the product before moving, repositioning, servicing, cleaning, or when not in use. Grasp only the plug to disconnect. Unplug if left unattended or during electrical storms.

SERVICING WARNING:

• Clean regularly as instructed in this manual. Unplug before cleaning.
• Do not use gasoline, thinners, solvents, or other chemicals for cleaning.
• Do not open the appliance housing. All service and repairs must be done by a Vornado Authorized Service Center to avoid shock.
• The product has overload protection (fuse). If the fuse blows, unplug and replace it with the specified rating. If the replacement fuse blows, a short-circuit may be present; discard or return for repair.

User Servicing Instructions (Fuse Replacement)

WARNING: Risk of Fire. Do not replace the attachment plug. It contains safety devices (fuse, AFCI, LCDI) that should not be removed. Discard the product if the attachment plug is damaged.

1. Turn off the appliance using the product controls.
2. Grasp the plug (not the cord) and disconnect from the outlet.
3. Replace fuse only with a 5 Amp, 125 Volt fuse approved by Vornado Consumer Service.
4. Once the replacement fuse is received, use a small flat-head screwdriver to slide open the fuse cover on the plug. (See Figure A: Fuse cover on plug).
5. Remove the old fuse by gently lifting each end with the screwdriver. (See Figure B: Removing fuse).
6. Install the replacement fuse by gently pushing each metal end into the receptacle one at a time. Do not push on the center, as it is fragile. (See Figure C: Installing fuse).
7. Slide the fuse cover closed using the screwdriver, ensuring it fits completely and flush. (See Figure D: Closing fuse cover).
8. Plug the appliance back into the outlet and turn on the power.
9. If the replacement fuse blows again, a short-circuit may be present. Discard the product or return it to an authorized service facility.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits provide reasonable protection against harmful interference in residential installations. The equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. There is no guarantee interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try correcting the interference by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a circuit different from the receiver's.
• Contacting Vornado Customer Service, a dealer, or an experienced radio/TV technician.

This Class B digital apparatus complies with Canadian ICES-003.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Supplier's FCC Declaration of Conformity:

• Unique Identifier: Vornado Model TRANSOM
• Responsible Party: Vornado Air LLC
• Mailing Address: 415 E. 13th St., Andover, KS 67002
• Contact: www.vornado.com

Battery Disposal and Package Recycling

Battery Disposal: Dispose of batteries according to local laws and regulations, keeping them away from children. Some batteries may be recycled at local recycling centers. DO NOT DISPOSE OF BATTERIES IN FIRE; they may explode or leak. Keep new and used batteries away from children.

Package Recycling: Packaging materials are selected for environmental friendliness and recyclability. Dispose of all packaging materials responsibly.

Features

• Integrated Carry Handle: Easy to carry and install.
• Electronic Reversible Fan/Exhaust: One button for quick transition from fan to exhaust mode.
• Soft-Fit Modular Foam Block System: Easy installation creating a barrier against outside noises and temperatures.
• Weather Resistant Enclosure: Designed for durability.
• Low Profile Silhouette: Allows for greater visibility through the window.
• Auto Mode with Thermostat: Automatically adjusts airflow based on temperature.
• 4 Speed Touch Controls: Provides a setting for every comfort level.
• Remote Control: Offers convenience at your fingertips.
• Extra Long 8' Grounded Power Cord: Ample cord length for secure wall connection.
• Auto Dimming Display: Reduces light pollution and saves energy.

Getting Started: Window Installation

NOTE: The TRANSOM is designed for double-hung and some slider-type windows. DO NOT attempt vertical window installation.

1. We recommend keeping the window screen in place.
2. Center the TRANSOM in the window, ensuring the foam on the bottom of the product is snugly secured in the bottom of the window casing.
3. Close the window.
4. Tuck the Soft-Fit foam blocks on either side of the product securely into the window casing.

Controls and How to Use

Control Panel Layout:

The control panel features the following:

• AUTO MODE BUTTON: Activates/deactivates Auto Mode.
• TEMPERATURE DISPLAY: Shows current room temperature (Fahrenheit only).
• TEMPERATURE ADJUSTMENT BUTTONS: Use ⬆️ / ⬇️ to set desired temperature. Holding for 3 seconds allows quick adjustment (5 degrees/sec).
• DIRECT MODE BUTTON: Switches between direct airflow (➡️) and exhaust airflow (⬅️).
• SPEED CONTROL BUTTONS: Use ⬆️ / ⬇️ to select one of four speeds: 1-LOW, 2-MEDIUM, 3-HIGH, 4-TURBO. Speed is indicated on the SPEED DISPLAY.
• SPEED DISPLAY: Shows the selected speed setting.
• POWER BUTTON (⏻): Turns the unit ON or OFF.

How to Use:

1. Touch the ⏻ button to power the unit ON or OFF.
2. Select desired speed by pressing ⬆️ or ⬇️. There are four speeds: 1-LOW, 2-MEDIUM, 3-HIGH, 4-TURBO.
3. Touch the ➡️/⬅️ button to change from direct airflow to exhaust, or vice versa.
4. Touch the ? button to activate AUTO MODE. The icon will turn green. Touch it again to deactivate AUTO MODE; the icon will turn white.

Notes on Operation:

• When powered off, the unit automatically moves to the CLOSED position (no direct or exhaust airflow).
• When first plugged in and turned on, the unit defaults to DIRECT MODE. It remembers user settings when powered ON/OFF.
• Temperature display is Fahrenheit only.
• The control display has auto-dimming. It dims after a few seconds of inactivity and wakes up on the first touch.

Remote Control

Remote Functions:

• Power (⏻): Powers the unit ON or OFF.
• Speed (⬆️ / ⬇️): Selects desired speed setting.
• Mode (➡️/⬅️): Changes airflow from direct to exhaust, or exhaust to direct.
• AUTO MODE (?): Activates AUTO MODE (green icon). Pressing ⬆️ or ⬇️ adjusts temperature; holding for 3 seconds allows quick adjustment. A single press of the ? button when AUTO MODE is active will show SET TEMP if adjustments are needed. Pressing ? twice deactivates AUTO MODE (white icon).

Note: The remote requires a line-of-sight path to the receiver lens on the product (located near the control panel).

Battery Replacement:

The remote uses one 3V CR2032 coin cell battery (pre-installed). Remove the battery pull tab before first use.

1. For replacement, use a 3V CR2032 battery.
2. To replace, loosen the small screw on the battery door on the back of the remote using a #1 Phillips screwdriver (?).
3. Clean battery contacts if necessary. Remove any plastic protection from the new battery.
4. Place the battery in the remote with the '+' side facing out, ensuring correct polarity.
5. Replace the battery door and screw.

Note: Remove the battery if the remote will not be used for an extended period. Always remove dead batteries immediately.

Cleaning

Regular cleaning is necessary as the product moves a substantial amount of air. If service is required, return the unit to Vornado (see Warranty).

WARNING: Unplug the tower before cleaning to reduce the risk of electrical shock and injury.

Regular Cleaning:

1. Unplug the tower before cleaning.
2. Use the brush attachment on your household vacuum cleaner to remove accumulated dust.
3. Wipe down the entire tower with a soft cloth.

Note: Do not use gasoline, thinners, solvents, or other chemicals for cleaning. The motor is permanently lubricated and requires no oiling.

Troubleshooting

Warranty

Vornado Air LLC ("Vornado") warrants this Whole Room Circulator ("Product") to the original consumer or purchaser to be free from defects in material or workmanship for a period of five (5) years from the date of purchase. If any defect is discovered within the warranty period, Vornado will, at its discretion, repair or replace the Product at no cost.

For warranty or repair service:

• Call 1-800-234-0604 or email help@vornado.com to obtain a Return Authorization ("RA") form.
• Provide your Product's model number, serial number, name, address, city, state, zip code, and phone number.
• After receiving the RA form, ship your Product to: Vornado Air LLC, Attn: Warranty & Repair, 415 East 13th Street, Andover, KS 67002.
• Packages must be clearly marked with the RA number.
• Allow 1-2 weeks for repair and return.

Repairs not covered by warranty or outside the warranty period will incur a fee for materials, labor, handling, and shipping.

Warranty Exclusions: This warranty does not apply to defects from abuse, modification, mishandling, improper maintenance, commercial use, unauthorized repair, damages during shipment, or acts of God. Improper product use, such as using external devices to alter voltage/frequency or shipping to unintended countries, will void warranties. Unauthorized modifications or repairs are not recommended.

Limitations: REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY. VORNADO IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS WARRANTY. Some states may not allow limitations on implied warranties or consequential damages.

This warranty gives you specific legal rights, and you may have other rights that vary by state.

General Information: All company and product names are trademarks of their respective owners. Specifications are subject to change without notice. Vornado® is a trademark owned by Vornado Air LLC.

Designed, engineered, and supported in Andover, KS.

Company Information

Vornado Air, LLC

415 East 13th Street, Andover, Kansas 67002

Phone: 800.234.0604

Website: vornado.com

Document Model: CL3-0770 R-, V00