Nedis SPBT37101xx Bluetooth Speaker

Product Overview

The Nedis SPBT37101xx is a portable Bluetooth speaker designed for wireless audio playback.

Features and Controls

The speaker features several buttons and ports for operation and connectivity:

Button and Port Descriptions:

• 1. On/off button: Press and hold for 2 seconds to switch the device on or off. Press briefly to select the mode.
• 2. Play/pause button / Hands-free button / Bluetooth button:
  • Press to play or pause the current track.
  • Press to answer or end a call. Press and hold to reject a call.
  • Press and hold to initiate Bluetooth pairing or disconnect from the current Bluetooth connection.
• 3. Volume + button / Next button:
  • Press and hold to increase the volume.
  • In Bluetooth mode, press to select the next track.
• 4. Volume - button / Previous button:
  • Press and hold to decrease the volume.
  • In Bluetooth mode, press to select the previous track.
• 5. USB port: Used for charging the device. Connect a USB cable to this port and to a USB adapter or computer. A red indicator light shows when charging is in progress. The light turns off when charging is complete.
• 6. AUX input: Connect an AUX cable from an audio device to this port. A red indicator light will illuminate.

Pairing the Speaker with a Bluetooth Device

1. Turn on the speaker.
2. Activate Bluetooth on your Bluetooth-enabled device (e.g., smartphone, tablet).
3. Search for new devices on your Bluetooth device.
4. Select "SPBT37101" from the list of available devices.
5. If prompted for a password, enter "0000".
6. Your Bluetooth device will confirm when pairing is successful.

Safety Information

General Safety

• Read the manual carefully before use and keep it for future reference.
• Nedis is not liable for consequential damages or damages to property or persons caused by non-observance of safety instructions or improper use.
• Use the device only for its intended purpose as described in the manual.
• Do not use the device if any part is damaged or defective. Replace immediately if damaged.
• The device is suitable for indoor use only. Do not use outdoors.
• The device is suitable for domestic use only. Do not use for commercial purposes.
• Do not use in locations with high humidity (e.g., bathrooms, near swimming pools).
• Do not use near bathtubs, showers, basins, or other water-containing vessels.
• Do not use with a timer or separate remote-control system that switches the device on automatically.
• Do not cover the device.
• Place the device on a stable, flat surface.
• Keep the device away from flammable objects.

Electrical Safety

• To reduce the risk of electric shock, this product should only be opened by an authorized technician when service is required.
• Disconnect the product from the mains and other equipment if a problem occurs.
• Do not use the device if the mains cable or plug is damaged or defective. It must be replaced by the manufacturer or an authorized repair agent.
• Always check that the mains voltage matches the voltage on the device's rating plate before use.
• Do not move the device by pulling the mains cable. Ensure the cable cannot become entangled.
• Do not immerse the device, mains cable, or plug in water or other liquids.
• Do not leave the device unattended while the mains plug is connected.
• Do not use an extension cable.

Cleaning and Maintenance

Warning! Before cleaning or maintenance, always switch off the device, remove the mains plug from the wall socket, and wait until the device has cooled down.

• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If it does not operate correctly, replace it with a new device.
• Do not immerse the device in water or other liquids.
• Clean the outside of the device using a soft, damp cloth. Thoroughly dry with a clean, dry cloth.
• Clean ventilation openings with a soft brush.

Support

For further assistance, comments, or suggestions, please visit www.nedis.com/support.