Operating Manual For Easy Clicker

UR3-SR3

1 Introduction

This remote control is designed to operate most Digital and Analog Cable Boxes, as well as TVs, and a DVD player.

2 Replacing Batteries

Before you program or operate the remote control, you must install two new AAA alkaline batteries.

  1. Remove the battery compartment cover from the back of your remote control.
  2. Check battery polarity carefully, and install the batteries as shown in the illustration below.
  3. Replace the battery compartment cover.

Illustration: Battery compartment showing correct placement of two AAA alkaline batteries with '+' and '-' terminals indicated.

3 Button Functions

This section describes the functions of the buttons on the remote control.

TV, DVD, CBL
Turn power of these devices on/off.
GUIDE
Displays the program guide listings.
LIST
Displays a list of programs you have recorded, allowing you to select one for viewing.
OK/SEL
Selects highlighted screen options.
VCR/DVD-VOD KEYS (REW, PLAY, FF, REC, STOP, PAUSE)
Perform standard VCR and DVD functions when in DVD mode, and Video On Demand functions when in VOD mode.
MUTE
Silences the audio. Press to activate. Press this key again to restore sound to previous level.
VOL⬆️/⬇️
Raises or lowers the sound level.
LAST
Accesses the previously tuned channel.
FAV
Displays favorite channels.
MACRO KEY
Future Use
SETTINGS/MENU
Displays the settings Menu.
INFO
Displays information about the program currently playing or highlighted in the program guide.
EXIT
Exit from current screen.
PAGE⬆️/⬇️
Accesses pages above or below the information currently displayed.
A, B, C, D (MACRO buttons)
Highlight an item from the on-screen choices. Make direct selections from on-screen menus.
ON Demand
Provides direct access to On Demand channel.
CH⬆️/⬇️
Selects the next higher or lower channel.
NUMBER Pad (0-9)
Enter numbers to tune to channels. Also make numeric entries on on-screen menus. You can also use the CH⬆️/⬇️ and the guide as alternate ways to tune to channels.

4 Programming the Remote Control

Note: In this section, when you are instructed to press a [DEVICE] button, that means you should press either the CBL, TV, or DVD button, depending on which device you are programming the remote to operate.

A. Quick Set-Up Method

  1. Turn on the component you want to program. To program your TV, turn on the TV.
  2. Press and hold the [DEVICE] key for 5 seconds until the Device LED will blink once and stays on. Continue to hold the [DEVICE] key and press the number key assigned to your brand in the Quick Set-up Code Table and release both [DEVICE] key and the number key to save the code. The Device LED will blink twice to confirm that the code is stored.
  3. Point the remote control at the component.
  4. Press the [DEVICE] button. If it turns off, it is programmed for your component. If it does not turn off, use the Pre-Programmed 3-Digit code Method or Scanning Method.

Repeat the steps above for all components (CBL, TV, DVD).

B. Quick Set-up Code Tables

CBL
Quick NumberManufacturer/Brand
0PACE DTA
1SA/CISCO, SAMSUNG, PACE DIGITAL
2MOTOROLA DIGITAL
3MOTOROLA DTA
4EVOLUTION DTA
5CISCO IPTV
6ADB IPTV
7TECHNICOLOR
8AMINO 140/540 IPTV
9MOTOROLA IPTV
TV
Quick NumberManufacturer/Brand
0SANYO
1SONY
2SAMSUNG
3LG
4TOSHIBA
5PANASONIC
6PHILIPS
7HITACHI
8SHARP
9VIZIO
DVD
Quick NumberManufacturer/Brand
0HITACHI
1SONY
2PHILIPS
3SAMSUNG
4PHILIPS MAGNAVOX
5PANASONIC
6LG
7JVC
8DENON
9PIONEER

C. Manual Programming

The remote control can be programmed by entering a three-digit code number that corresponds to particular brands and models of equipment. The three-digit code numbers are listed in the code tables sections of this instruction manual.

  1. Turn on the equipment that you want the remote control to operate Cable Box, TV and DVD.
  2. Press the [DEVICE] button and the [OK/SEL] button simultaneously for three seconds. The corresponding device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds. The next step must be entered while the LED is on.
  3. Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables. If there are more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.
    Note: You can verify that you have selected the correct code by pressing the [MUTE] button. The equipment should turn on or off.
  4. Store the three-digit code by pressing the same [DEVICE] button once again. The device LED will blink twice to confirm that the code has been stored.
    Note: Try all the functions on the remote control. If any of the functions do not operate as they should, repeat the instructions from Step 2 using the next three-digit code number from the same brand list.

D. Auto Search Method

If none of the three digit code numbers assigned to your brand of equipment works, or the code table does not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by following steps:

  1. Turn on the equipment that you want the remote control to operate (Cable Box, TV, or DVD).
  2. Press the [DEVICE] button and the [OK/SEL] button simultaneously for three seconds. The device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds. The next step must be entered while the LED is on.
  3. Press the [CH⬆️] or [CH⬇️] button one at a time or keep it pressed. The remote will emit a series of Power ON/OFF code signals. Release the [CH⬆️] or [CH⬇️] button as soon as the equipment turns off.
    Note: You can verify that you selected the correct code by pressing the [MUTE] button. The equipment should turn On or Off.
  4. Press the same [DEVICE] button to store the code. The Device LED will blink twice to confirm that the code has been stored.

E. To find the Three-Digit Code that Was Programmed using the Auto Search Method

  1. Press the appropriate [DEVICE] button and the [OK/SEL] button simultaneously for three seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.
  2. Press the [INFO] button. The device LED will blink a number of times indicating the number of each digit for the code. Each digit is separated by a one second interval of the LED being off.
    Example: One blink, then three blinks, then eight blinks indicates the code number 138.
    Note: Ten blinks indicates the number 0.

F. Programming a Second TV to the DVD Button

  1. Press the [DVD] button and the [OK/SEL] button simultaneously for 3 seconds. The DVD LED will turn on for 20 seconds. The next step must be performed while the LED is on.
  2. Press the [TV] button.
  3. Point the remote control toward the TV and enter the three-digit code for your TV from the TV codes table.
  4. Store the three-digit code by pressing the [DVD] button. The device LED will blink twice to confirm that the code has been stored.

G. Programming for Advanced Functions.

In the CABLE device mode, the A,B,C,D and blank macro buttons can be programmed to act as a 'Macro' or Favorite Channel button. This allows you to program up to five 2-digit channels, four 3-digit channels or three 4-digit channels that can be accessed with ONE button press.

Note: The A,B,C and D buttons are not programmable if you have a Digital Cable Box made by Pace, Pioneer or Scientific-Atlanta.

  1. Press the [CBL] button to select the CBL mode.
  2. Press the [MACRO] button and [OK/SEL] button simultaneously for 3 seconds. The [CBL] button will turn on for 20 seconds.
  3. Enter the 2, 3 or 4-digit code for the channel you want programmed first (for example, 007) using the Number Pad, then press the [STOP] button. Then enter the code for the next channel (for example, 050), then press the [STOP] button. Repeat this process for the third channel. The [CBL] button will blink once for each channel entered.
  4. Press the [CH⬆️] button to store the channels that were selected. The [CBL] button will blink twice to confirm the storage of commands.

To access the programmed channels, press the [MACRO] button once. This will bring up the first channel. Press once again and it will bring up the second channel. Press again and it will bring up the third channel.

To erase the Macro programming and return to the original function:

  1. Press the [CBL] button to select the CABLE mode.
  2. Press a [MACRO] button and the [OK/SEL] button simultaneously for 3 seconds. The CBL device LED will turn on for 20 seconds. The next step must be performed while the LED is on.
  3. Press the [CH⬆️] button to erase the functions stored in the button. The CBL device LED will blink twice to confirm that the memory button has been erased.

H. Assigning the Volume and Mute keys to a Different Device

By default, the VOL⬆️, VOL⬇️ and MUTE keys operate through your TV. If you would like those keys to operate those functions on a different device, follow these steps.

  1. Press the [OK/SEL] button and [CBL] button simultaneously for three seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.
  2. Press the [VOL⬆️] button. The device LED will blink.
  3. Press the [DEVICE] button corresponding to the device that you would like the volume and mute buttons to control. The device LED will blink twice to confirm the programming.
    Example: If you wish to have the volume and mute keys operate your Cable Box, press the [CBL] button in Step 3.

I. Assigning the Channel keys to a Different Device

By default, the CH⬆️, CH⬇️, NUMERIC and LAST keys operate through your Cable Box. If you would like those keys to operate those functions on a different device, follow these steps.

  1. Press the [OK/SEL] button and [CBL] button simultaneously for three seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.
  2. Press the [VOL⬇️] button. The device LED will blink.
  3. Press the [TV] button. The device LED will blink twice to confirm the programming.
    Note: If you wish to have the channel keys operate your Cable Box, press the [CBL] button instead of the [TV] button in Step 3.

J. Assigning the DVD-VOD keys to control your DVD

By default, the REW, Play, FF, Record, Stop and Pause keys operate VOD (Video On Demand) through your Cable Box. If you would like those keys to operate those functions on your DVD, press the PLAY button for 3 seconds until the DVD button lights. To return to your Cable Box control, press the PLAY key again for 3 seconds until the CBL button lights.

K. Low Battery Warning

When the battery is low (2.3V-2.0V) and needs to be replaced with fresh batteries, device LED will blink 2 times in sequence whenever a [DEVICE] button is pressed to turn on equipment.

L. Memory Lock System.

This remote control is designed to retain programmed memory for 10 years — even after batteries are removed from the remote control. For additional information about your remote control, go to www.universalremote.com

5 Set-up Code Tables

CABLE TV

MAKER(BRAND)NAMECONVERTERCODE No
CISCO/SAEXPLORER Series001 007
8600X011
8600021
8540,8570,8590022
8500023
IPN Series051
Logic TV209
MOTOROLADCT Series (DVR Model)002
VIP Series053
DTA100206
GENERAL INSTRUMENTDCT Series,DCH Series, CFT2200008
JERROLDDL4,DQNV/DRX,DPBB,DPV/DP/DQN,DRZ027
BMC9012/BMC9022006
DSR470005
CFT2000012
DRZ024
ADBDL4,DP(V),DQN(V),DPBB025
DRX002
Some Model048
AMINODL4,DQNV/DRX,DPBB,DPV/DP/DQN,DRZ027
ADB Series054 055
ADB5810WX115
ADB5810W, ADB5721WNX163
ARRISAmigo 7X v2235
AmiNET Series249
A125, A130, A530256 257
A110260 261
A140, A540, A550219
AT&TMP2000172
BELL FIBEDCX3635242
Blue StreamDCX900243
BT VisionFrontier216
CINCINNATI BELLVIP5662W, VIP7802140
CISCOVIP6102W234
U-VERSE051
PVR Slim205
Slim 2229
COMCASTeStream 4K, EVO Force 1148
CONFLUENTVbox Series, DIT Series232
Cox Digital CableYouView960
DIGEOZTE194
ZTE B700-V3220
RNG200113
IPN Series051
CIS330, CIS430156
DIGITAL TRANSPORT ADAPTER50001
RNG200113
XFINITY195
CTG4-HDR196
Mini Box223
2056-MSX153

CABLE TV

MAKER(BRAND)NAMECONVERTERCODE No
Digital Multimedia TechnologyDMT-205HD222
DirecTVGenie238
Sky AP HD / Sky Ap Jr239
Dish NetworkHopper 3122
Evolve161
DREAMDM7020S159
DSTVDSTV [PVR1]182
DSTV [PVR2]183
DUNESMART B1,BE,D1,H1,HE,ME184
MINI,ULTRA185
DuosonTotalPlay218
ENTONEURC PLUS155
Kamai 651221
Kamai 500210 221
Evolution DigitalKamai 45x213
EVOLUTION FTAeStream 4k221
EVOLUTIONX0-01148
UNIVERSAL SD DTA158
UNIVERSAL HD DTA189
FoxtelIQ3215
FrontierVIP2262228
HAMLINCR6000149
CR6600,6800,CR83042
CRX5000043
HOMECASTNC3000C01044
HorizonZiggo176
Humax101-H225
F1 Mini231
Innovative SystemsIPTV Receiver960
KAONMini262
Layer3C12516208
MOXIMOXI MEDIA CENTER226
MOXI HD DVR006
MYRIO2056-MSX052
NAGRAEvo Series153
NAGRAVISIONDCI-4136M054 055
NBOXHDDTA211
INFUSIONADB-5720SX201
ABD5720SX181
NOW TVNUVENIO SD PHOENIX, NUVENIO HD, SOLARIS, NOVA186
NSCNOWTV192
OAKIM781R114
IM781046
SIGMAONE, P1,P2,P3, SIGMA 2000047
RTC56,RKDM037
SIGMA 2001,2002038
OptimumSIGMA 450,500,550039
Altice One040
Optimum237
PACEDV8555, Stream236
500 Series245
TDC Series001 007
002

CABLE TV

MAKER(BRAND)NAMECONVERTERCODE No
PANASONICDTA Series113
510004
Pico DigitalDC550DR214
PIONEERDC60X206
IPH8005M217
RCN140,145,170,175030
REGENCY110,120,130,150,160031
SAMSUNGVMX1224
VOYAGER Series001 007
SEACHANGEBA9000013
BA4100,4200,4500028
SKYBA-V1000029
EVO Force 1148
SONYALL MODELS045
SpectrumOCAP MODELS001 007
TECHNICOLORANALOG CONVERTER130
TELNETHD TCM190
THOMPSONSKY+HD191
TILEVISIONSKY HD230
Time WarnerQ204
TOCOMAP HD, AP Jr240
TRANSPARENT VIDEO SYSTEMSDHG-M55CV241
Virgin MediaSpectrum003
WEGENERRC-RW100231
WINDSTREAMDCI1011GEM,DCI1011GEM1,DCI104ICS365
ZeeVeeTV19154
ZENITHWARNER 1365 188
5507187
5503A001
4000A035
TIVO 6036
SMD 515193
KINETIC959
ZvMXE, ZvSync050
MN2500212
PM227
Z-TAC032
033
034

CABLE-DVR(TIVO)

MAKER(BRAND)NAMECODE NUMBER (3 DIGIT) LIST
CHANNEL MASTER859836 837 838 839 840
DSTV817 821 822 823 824 825 826 827 828
HUGHES817 818
HUMAX834 816
ICREALTIME790 817 821 822 823 824 825 826 827 828 835
PHILIPS879
Speco Technologies790 817 818 821 822 823 824 825 826 827 828 858
TIVO817
TOSHIBA855
ZUUMMEDIA

TV

MAKER(BRAND)CODE NUMBER (3 DIGIT) LIST
ADMIRAL072 081 160 161 096
AD NOTAM672
ADVENT147
AFFINITY680
AIWA141 145
AKAI070 146 004 148 124 226 104 108 244
AKIO103
ALARON028
AMARK112 127
AMERICA ACTION043
AMPRO073 167
ANAM043 054 056 080 112 131
AOC058 070 004 112 245
APEX092
APEX DIGITAL015 150 037 724
AQUAVISION097 100 686 904
AUDIOVOX076 103 043 035 078 224
AUVIO689
AVIELO090 628
AVION223
Avera761
AWOL Vision905
AXESS711
BAYSONIC043
BELL&HOWELL072
BENQ234
BRADFORD043
BROKSONIC096 170
CAIRN162
CANDLE070 002 003 004
CAPEHART058
CARVER164
CELEBRITY001
CETRONIC043
CIELO714
Ciil732
CINERAL103 120
CITIZEN070 002 003 004 101 103 127
CLASSIC043
COBY640 641 671 236
CONCERTO004
CONTEC043 051
Continu-us161 746 747
CORONADO127
CRAIG043 054 028
CROSLEY164
CROWN043 127
CURTIS MATHES070 004 101 011 072 081 120 164 127
CXC043
DAEWOO076 103 112 004 127 016 043 044 125 120
DAYTRON004 127
DELL041 249
DENON011
DIGITAL PROJECTION090
DUMONT004 073
DWIN131 132 161
DYNASTY043
DYNATECH062
FISHER007 057
ELECTROBAND001
ELECTROHOME024 076 127
ELEMENT004 110 622 690
EMERSON005 028 043 048 076 096 155 004 051 151 153 154 127 121
ENVISION070
EPSON087 228 794
ESA031
Evervue755
FREEMOTION688
FUJITSU164 197 028 157 149 066 217
FUNAI028 043 052 168
FUSION642
FUTURETECH043
GATEWAY165 031
GE070 073 130 144 160 161 004 008 009 034 056 074 155 081 120
GEM031
GIBRALTER004 073
GOLDSTAR004 106 112 127
GPX674
GRUNPY028 043
HAIER004 116 623 236 749
HALL MARK004
HANNSPREE099
HARLEY DAVIDSON028
HARMAN KARDON164
HARVARD043
HISENSE198 021 619 630 631 236 752 749
HITACHI011 007 009 004 072 010 012 023 075 158 127 174 243 670 749
HP027 039 098
HUMAX122
HYPERION242
HYUNDAI049 067
ILO055 096
INFINITY164
INFOCUS046 215 225 233 726 733
INKEL129
INSIGNIA068 069 078 096 164 168 247 903
INTEQ073
JBL164
JCB001
JCPENNEY004 008 024 030 065 070 101 160 127
JENSEN013
JVC038 001 034 083 195 159 227 639
KENWOOD070 001
KLEGG220
KLOSS002 059
KREISEN202
KTV070 043 154 127
LG004 106 112 127 086 236 648 741
LODGENET072
LOEWE196 164 738
LOGIK072
LUXMAN004
LXI007 015 052 081 160 164
MAGNAVOX070 003 004 022 059 060 061 063 064 127 164 094 160 056 028 035 211 205 218 050 138 232
MAJESTIC072
MARANTZ164 070 143 169
MATSUI164
MATSUSHITA080
MAXENT165
MEGATRON004
MEMOREX004 007 072 028 096
METZ088
MGA024 070 004 042
MIDLAND073
MINERVA088
MINTEK077
MINUTZ008
MITSUBISHI109 024 042 004 040 146 028 124 081 200 235
MOTOROLA081
MTC070 004 062 101
MULTITECH043
NAD015 025
NEC070 130 134 040 056 007 019 024 004 182 140 717 758
NEXUS620 078
NIKEI043
NIKKO103
NIKO175
NORCENT211
NTC103
NUVISION084
OLEVIA219 004 161 144 160
ONKING043
onn.898
ONWA043
OPTIMUS080
OPTOМА029 032
OPTONICA019 081
ORION096 201 203 204 205 028
PANASONIC080 034 056 164 190 230 248 237 240 664 801
PEERLESS-AV723 763
PHILCO070 003 004 024 056 059 060 063 064 127 164
PHILIPS164 005 038 093 127 070 003 004 059 199 218 161 232 629 727 773
PIONEER023 025 135 176 004 018 070 183 191 208 214 182 660
PLANAR728 742 787 788
POLAROID026 118 119 006 110
PORTLAND004 103 127
PRISM034
PROSCAN144 160 161 167 236
PROTON004 058 171 173 193 127 163
PROTRON102 213 004 115
PROVIEW110
PROX092
PYLE HOME661 662
QUASAR034 056 239
RADIO SHACK004 019 127 043
RCA160 161 144 065 070 004 023 024 056 074 152 081 209 713 751
REALISTIC007 019
REVOLUTION HD220
RUNCO072 073 130 179 180 181 182 216 194 697
SAMPO070 004 058 165
SAMSUNG192 089 004 101 127 133 160 105 070 184 185 515 655
SANSEI120
SANSUI096 244 078 762
SANYO007 053 057 082 020 750
SCEPTRE036 699
SCOTCH004
SCOTT004 005 028 043 048 127 113
Sealoc897
SEARS004 007 015 028 030 057 082 094 160 052 164 127
SEIKI690
SELECO189
SEMIVOX043
SEMP015
SEURA704 797
SHARP081 019 014 028 004 022 127 684 692 735 765 766
SHERWOOD128
SIGNATURE072
Silo001
Skyvue086
Skyworth895
SOLE177 178
SONY001 241 633 126 139
SOUNDESIGN003 004 028 043
SOYO163
SPECTRICON112
SPECTRONIQ004
SQUAREVIEW052
SSS004 043
STARLITE043
SUNBRITE633 634 635 236 238 772 901 902 907
SUPRE MACY002
SUPREME001
SVA046
SYLVANIA070 003 059 060 063 064 127 160 164 044 056 168 121 231
SYMPHONIC052 168
SYNTAX OLEVIA219 004 161 144 160
TANDY081
TATUNG056 062
TCL705 749
TECHNICS034 080
TECHNOL ACE028
TECHVIEW246
TECHWOOD004
TEKNIKA002 003 004 024 028 043 072 101 103 164 127
TELEFUNKEN244
TELERENT072
TERA172
THOMPSON166
TILEVISION663
TMK004
TNCI073
TOSHIBA015 030 007 040 062 101 142 045 137 703
TOTEVISION127
TRUTECH212
UNIVERSAL008 009
UPSTAR708
VENTURER236
VIDEO CONCEPTS146
VIDIKRON188 164 182
VIDTECH004
VIEWSONIC210 211 720
VIORE055 229 192
VISCO110
VIZIO236 031 624 004 625 675
WARDS004 064 164 008 009 019 028 060 061 063 072 074 070 127
W Box Technologies731
WESTINGHOUSE076 036 221 222 001 280 690 695
WINBOOK079
YAMAHA004 070 206 207
YORK004
YUPITERU043
ZENITH011 072 073 095 103 096
ZONDA112

DVD

MAKER(BRAND)CODE NUMBER (3 DIGIT) LIST
ADCOM203
AIWA210 214
AKAI239
ALPINE179
ANTHEM361
APEX DIGITAL240 197 247 248 196
ARCAM165 148 374
AUDIOVOX075
BOSE244 245
CAMBRIDGE AUDIO224 145 360
CARY AUDIO DESIGN249 149
CLASSE242
COBY206
CYBERHOME170 212
DAEWOO170
DENON226 184 225 358
DUNE366
DURABRAND235
DYNEX089
EMERSON235
ESA235
FUNAI235
GE188 189
GOLDSTAR182 194
GO VIDEO228 182 252 253 254
GRADIENTE243
HARMAN KARDON217
HITACHI181
HITEKER197
INSIGNIA078 235 085 182 178 089 385
INTEGRA208 236 238 128
JVC185
KENWOOD166
KISS237
KLH230
KOSS243
KRELL218
LEXICON216
LG182 194 105 090
LITEON150
MAGNAVOX178 191 195 235 386
MARANTZ176 177 135
MCINTOSH167
MEMOREX222
MERIDIAN200
MINTEK240 196
MITO229
MITSUBISHI186
MOXI112
MYRYAD211
NAD198 182 092
ONKYO207 236 128
OPPO125
OPTIMUS187
ORITRON243
PANASONIC076 219 173 184 192 103 104 379
PARASOUND083
PHILIPS164 074 209 176 177 191 195 127 381 387
PIONEER187 180 175 221 223 093 364 156 377
POLAROID075 084 085
PRIMARE250 251
PROCEED172
PROSCAN188 189
RCA188 189 086
Reavon966
SANSUI201
SANYO215
SAMSUNG183 228 193 205 073 152 241 380
SENSORY SCIENCE254 255
SHARP174
SHERWOOD083 129 361
SONY077 190 213 168 118 119 120 121 126 091 363 368 378 382
SPECTRONIQ088
SUPERSCAN235
SV2000235
SYLVANIA235
SYMPHONIC235
TAG McLaren202
TASCAM185
TECHNICS173
THETA DIGITAL187
TOSHIBA169 171 191 206 227 201 236 356
TRUTECH151
VENTURER229
VINC220 087
VIZIO375
YAMAHA199 204 246 184 192 334 383
ZENITH182 194

Note: For TV/DVD combination units, Please use following steps to operate the volume control.

  1. Press the [CBL] button and the [OK/SEL] button simultaneously for 3 seconds. The device LED will turn on for 20 seconds. The next step must be performed while the LED is on.
  2. Press the [VOL⬆️] button.
  3. Press the [DVD] button. The CBL device LED will blink twice to confirm the programming.
Models: UR3-SR3 Easy Clicker, UR3-SR3, Easy Clicker, Clicker

File Info : application/pdf, 24 Pages, 518.45KB

PDF preview unavailable. Download the PDF instead.

?tmstv=1753356295

References

QuarkXPress(R) 8.5 QuarkXPress(R) 8.5

Related Documents

Preview Universal Remote Control UR3-SR3 Easy Clicker Operating Manual
Comprehensive operating manual for the Universal Remote Control UR3-SR3 Easy Clicker, detailing setup, programming, button functions, and code tables for various devices like TVs, Cable Boxes, VCRs, and DVD players.
Preview Universal Remote Control UR3-SR2 Operating Manual
Comprehensive operating manual for the Universal Remote Control UR3-SR2, detailing setup, programming, button functions, and extensive code tables for various audio-visual equipment.
Preview UR3L-SR4 Universal Remote Control Operating Manual
Comprehensive operating manual for the UR3L-SR4 Universal Remote Control, detailing setup, programming methods (Quick Setup, Manual, Auto Search), learning functions, and advanced features for controlling cable boxes, TVs, and DVDs.
Preview Easy Clicker UR2-211 Universal Remote Control Operating Manual
Comprehensive operating manual for the Easy Clicker UR2-211 universal remote control, detailing setup, button functions, programming methods (Quick Set-Up, Manual, Auto Search), and special features like All Off and Volume/Channel Control.
Preview CLIKR™-5 Cable Remote Control Operating Instructions (UR5U-8700L & UR5U-8720L)
Comprehensive operating instructions and setup guide for the CLIKR™-5 Cable Remote Control (UR5U-8700L & UR5U-8720L) by Universal Remote Control, Inc. Learn how to replace batteries, program your remote using 3-digit codes or auto-search, and manage various device functions.
Preview UR4U-MDVR2 4-Function Cable Remote Control Operating Instructions
Get detailed operating instructions for the Universal Remote Control UR4U-MDVR2. This guide covers setup, programming, and features for controlling your cable box, TV, DVD player, and audio devices. Learn how to easily program your remote for optimal home entertainment.
Preview CLIKR-5 Universal Remote Control Operating Instructions
This document provides comprehensive operating instructions for the CLIKR-5 universal remote control (models UR5U-8780L & UR5U-8790L), detailing setup procedures, button functions, and extensive code tables for various audio-visual equipment.
Preview CLIKR-5 Universal Remote Control Operating Instructions
Comprehensive guide to operating and programming the CLIKR-5 universal remote control, including setup methods, button functions, and device code tables.