SUNMI Multifunction Base

Product Overview

The SUNMI Multifunction Base is designed to enhance the functionality of your Smart Payment Terminal. It provides essential features including charging capabilities, USB port expansion for peripherals, Wi-Fi internet access, and wireless data transmission.

For detailed technical specifications, please visit www.sunmi.com.

Product Description and Usage

The base allows you to place your POS terminal on it for charging. It also offers access to the internet via the base, either through a wired Ethernet connection (optional) or Wi-Fi.

Changing Wi-Fi Configuration: If you need to change the Wi-Fi settings, first disconnect the Ethernet cable. Connect your host device to the POS Base's Wi-Fi. Open a web browser on the host and navigate to 192.168.1.1. Log in using the default credentials (username: admin, password: admin). Navigate to the 'Wireless-Hotspot Settings' to configure the Wi-Fi name and password.

Ports: The base features a USB port, an Ethernet port (optional), an RJ11 port (optional), and a Type-C port.

Status Indication

The base includes indicator lights to show its status:

Note: The left indicator primarily shows network status, while the right indicates connection status.

Safety Precautions and Statements

Safety: Immediately turn off the power if you notice an unusual smell, overheating, or smoke. Do not use the device in extremely hot or cold environments, near open flames, or lit cigarettes. Ensure the environment is clean and dust-free to prevent small particles from entering the terminal. Avoid using the device near medical equipment without explicit permission.

Statements: SUNMI Technology Co., Ltd. is not responsible for damages or problems arising from use or maintenance that deviates from the instructions in this guide. The company is also not liable for issues caused by non-approved accessories or consumables. Unauthorized modifications to the product are not permitted.

Disclaimer: Product details may be updated without prior notice due to product improvements. Please refer to the actual product for the most current information. SUNMI reserves the right to interpret and modify this document.

Technical Specifications and Compliance

Adapter Specifications:

• Input: AC110-220V / 0.3-0.4A
• Output: DC5V / 2A (via USB Type-C)

Compliance:

• CE Marking: This device complies with the essential requirements and other relevant provisions of the EU Directives 2014/30/EU and 2014/35/EU.
• WEEE Symbol: [Recycling Symbol] This symbol indicates that the product should not be disposed of with normal household waste. At the end of its lifecycle, waste equipment must be taken to designated collection points.
• FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any received interference. The equipment complies with FCC radiation exposure limits for uncontrolled environments and should be installed with a minimum distance of 20cm between the radiator and the user's body.
• ISED Canada Compliance: This device complies with ISED Canada licence-exempt RSS standards. Operation is subject to two conditions: no interference and acceptance of any interference. The equipment complies with RSS-102 radiation exposure limits and should be installed with a minimum distance of 20cm between the radiator and the user's body.

For full EU declaration of conformity, visit: https://developer.sunmi.com/docs/read/en-US/maaeghjk480

Hazardous Substances Identification

The following table identifies the presence of toxic and hazardous substances in the product, in accordance with SJ/T11363-2006 standards:

Note: '○' indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in SJ/T11363-2006. 'X' indicates that the content of the hazardous substance exceeds the limit.

Product Information and Requirements

Product Name: Multifunction Base

Model: P2 Base

Manufacturer: Shanghai Sunmi Technology Co., Ltd.

Address: Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China

Issue Date: 20220725

Version: 1.3

Manufacturing Requirements:

• Colors: PANTONE 165C, PANTONE Orange 021C
• Craftsmanship: Encapsulation fold
• Material: 108g coated paper
• Dimensions: 80x160mm

This document is a quick start guide and contains important product information. SUNMI reserves the right to modify content without notice.

The document includes greetings in multiple languages such as Japanese, French, German, Arabic, Russian, Greek, Hindi, Portuguese, Italian, Turkish, Korean, and Chinese, expressing thanks.