Phomemo M832 Quick Start Guide

Computer Printing with Data Cable

1. Connect the Phomemo M832 printer to your computer using the provided Type-C data cable.
2. Open a web browser on your computer and navigate to the address M832.phomemo.com.
3. Follow the on-screen prompts to install the printer driver. Click 'Install' to begin and 'Finish' once the installation is complete.
4. Open the printer's top cover. Insert the paper roll correctly, ensuring it feeds smoothly, then close the cover.
5. Press and hold the [Power Button] (ON/OFF) for approximately 3 seconds. The printer will turn on, indicated by a green light.
6. Confirm the printer is securely connected to your computer via the Type-C data cable.
7. Locate the file you wish to print on your computer. Right-click the file and select the print option.
8. In the print dialog, select 'M832 Printer' from the list of available printers and click the 'Print' button to begin printing.

Smartphone Control

1. Download and install the Phomemo application from your smartphone's app store ([Google Play] or [App Store]).
2. Ensure the paper roll is correctly loaded into the Phomemo M832 printer.
3. Press and hold the [Power Button] (ON/OFF) for approximately 3 seconds until the green indicator light appears, signifying the printer is powered on.
4. On your smartphone, go to the Settings menu and enable [Bluetooth Symbol].
5. Open the Phomemo app. Search for and connect to the 'M832' printer via Bluetooth.
6. Within the Phomemo app, select the desired print function (e.g., Document print, Print Web, Print Images, Scan) and then choose the specific file you want to print.

Important Warnings

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC Warning

IC Caution: Radio Standards Specification RSS-Gen, issue 5- English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. RF exposure statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. - French: Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: Cet appareil ne doit pas causer d'interférences. Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil. Déclaration d'exposition RF: L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. L'appareil peut être utilisé dans des conditions d'exposition portable sans restriction.