Phomemo M832 Quick Start Guide

Computer Setup

1. Download Driver

   Visit M832.phomemo.com to download the appropriate driver for your computer system (Windows or Mac).

2. Install Driver

   Follow the on-screen instructions to install the downloaded driver. The installation wizard will confirm successful installation.

3. Load Paper Roll

   Follow the steps to properly load the paper roll into the printer.

4. Power On Printer

   Press and hold the ON/OFF button for 3 seconds to turn on the M832 printer. A green light indicates it is powered on.

5. Connect to Computer

   Connect the printer to your computer using the provided Type-C data cable.

6. Print

   Right-click the file you wish to print on your computer and select the print option. Choose the M832 printer from the available devices and start printing.

Smartphone Setup

1. Download App

   Download and install the Phomemo App from the Google Play Store or Apple App Store.

2. Load Paper Roll

   Follow the steps to properly load the paper roll into the printer.

3. Power On Printer

   Press and hold the ON/OFF button for 3 seconds to turn on the M832 printer. A green light indicates it is powered on.

4. Enable Bluetooth

   Turn on Bluetooth from your smartphone's settings.

5. Connect via App

   Open the Phomemo App, select the M832 printer, and connect to it via Bluetooth.

6. Print from App

   Select the file you wish to print within the Phomemo App and initiate the printing process.

Important Information

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC Warning

English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. RF exposure statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

French: Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: Cet appareil ne doit pas causer d'interférences. Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil. Déclaration d'exposition RF: L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. L'appareil peut être utilisé dans des conditions d'exposition portable sans restriction.

Scan the QR code [QR code symbol] to view more instructions.