Gembird WM-65T-01 TV Wall Mount (Tilt) User Manual
Model: WM-65T-01
For TVs: 32" - 65"
Max Load: 40 kg
Features
- Heavy duty steel LCD screen wall mount
- Supports most 32" - 65" LCD TVs
- VESA compatible, max. 600 mm x 400 mm
- Allows up to 15 degrees tilting
- Distance to wall: 50 mm
- Includes all necessary installation materials
Specifications
- Material: steel (1.35 mm)
- Max. load: 40 kg (32"-65")
- Wall distance: 50 mm
- Dimensions wall board: 670 x 110 mm
- Dimensions TV board: 420 x 28 mm
- Net weight: 1.35 kg
Package Contents
Package M (Mounting Hardware)
- A: M4x30 screw (x4)
- B: M5x30 screw (x4)
- C: M6x30 screw (x4)
- D: M8x30 screw (x4)
- E: M8x45 screw (x4)
- F: M6x35 screw (x2)
- G: D6 Washer (x4)
- H: D8 Washer (x4)
- I: Spacer (x4)
Package W (Wall Anchors)
- W-A: ST 6x50 screw (x4)
- W-B: Concrete anchor (x4)
Installation Instructions
Step 1: Prepare the Wall
Identify the desired mounting location on the wall. Ensure the wall is suitable for mounting (e.g., solid concrete). Use a drill with appropriate bits.
- Drill pilot holes using a 4.9mm twist bit.
- For concrete walls, use a 10mm concrete bit.
- Drill holes to a depth of 60mm.
- Important: Drill only into solid concrete; do not drill into mortar.
Visual Aid: Icons representing a drill, screwdriver, spirit level, max load (40 kg), wall distance (50 mm), and max TV size (65"). Icons for Package M and W hardware are also shown.
Step 2: Install Wall Anchors
Insert the concrete anchors (W-B) into the drilled holes. Tap them gently with a hammer if necessary to ensure they are flush with the wall surface.
Visual Aid: Diagram showing concrete anchors being inserted into brick wall holes, with a hammer icon.
Step 3: Mount the Wall Plate
Attach the wall plate to the wall using the provided screws (W-A) and washers (G). Ensure the plate is level using a spirit level. Tighten the screws securely.
Visual Aid: Diagram showing the wall plate being screwed onto the wall, with a spirit level on the plate.
Step 4: Attach Brackets to TV
Attach the TV brackets to the back of your TV using the appropriate screws (A-E) and washers (G, H) from Package M. Refer to your TV's manual for specific screw hole locations and sizes. Ensure brackets are securely fastened.
Visual Aid: Diagram showing TV brackets being attached to the back of a TV, with labels for screws and washers.
Step 5: Mount TV onto Wall Plate
Carefully lift the TV and hook the attached brackets onto the wall plate. Secure the TV to the wall plate using the provided locking screws and mechanism, as shown in the diagram. Ensure the TV is securely attached and cannot be accidentally dislodged.
Visual Aid: Diagram showing the TV being mounted onto the wall plate. Includes icons for caution [!], protection from moisture (water drops), handling with care (lifting icon), and a warning not to step on the product (foot with cross).
Warranty Information
Warranty Conditions (English)
The receipt must clearly list the date of purchase and the part number, in addition it should be printed. Keep the receipt for the entire warranty period since it is required for all warranty claims. During the warranty period the defective items will be credited, repaired or replaced at the manufacturer's expense. Work carried out under the warranty neither extends the warranty period nor starts a new warranty period. The manufacturer reserves the right to void any warranty claim for damages or defects due to misuse, abuse or external impact (falling down, impact, ingress of water, dust, contamination or break). Wearing parts (e.g. rechargeable batteries) are excluded from the warranty. Upon receipt of the RMA goods, Gembird Europe B.V. reserves the right to choose between replacement of defective goods or issuing a credit note. The credit note amount will always be calculated on the basis of the current market value of the defective products.
Gembird Europe B.V.
Wittevrouwen 56, 1358CD Almere, The Netherlands
www.gembird.nl/service
support@gmb.nl
