FPG Inline 5000 Series 800 Freestanding/Square Ambient
Product Overview and Technical Specifications
Key Features
- High energy efficiency: 0.05 kWh per hour (average)
- Cabinet operating at ambient temperature
- Smart display with double-glazed glass finished with a black trim
- Fixed Front or Sliding Doors Ambient Display options
- Three tiltable, height-adjustable stainless steel shelves and base for maximum display capacity
- 50,000 hour LED lighting system (2758 lumens per metre) in cabinet top and to each shelf
- Unique 30mm shelf-mounted ticket strip front and rear
Operational Excellence
- Sliding doors (staff side) and fixed front or sliding doors options (customer side)
- Constructed from stainless and mild steel with double-glazed, toughened safety glass
- Fan-assisted air circulation to mitigate heat build-up
- Designed for installation into joinery
- Fitted with adjustable 150mm legs (+30mm adjustment)
Specifications
General
Range | Temperature | Model | Front | Installation | Height | Width | Depth |
---|---|---|---|---|---|---|---|
INLINE 5000 SERIES | AMBIENT | IN-5A08-SQ-FF-FS / IN-5A08-SQ-SD-FS | SQUARE/ FIXED FRONT / SQUARE/ SLIDING DOORS | FREESTANDING | 1443mm | 807mm | 770mm |
Core Product Temperature
CORE PRODUCT TEMPERATURE | AMBIENT |
---|
Electrical Data
MODEL | VOLTAGE | PHASE | CURRENT | E24H (kWh) | kWh per hour (average) | IP RATING | MAINS | CONNECTION | CONNECTION PLUG | HOURS | LUMENS | COLOUR |
---|---|---|---|---|---|---|---|---|---|---|---|---|
IN-5A08-SQ-XX-FS | 220-240 V | Single | 0.23 A | 1.20 | 0.05 | IP 22 | 3 metre, 3 core cable | 10 amp, 3 pin plug | 50,000 | 2758 per metre | Natural |
Note: Please advise country to change plug specification.
Capacity, Access & Construction
MODEL | DISPLAY AREA | LEVELS | ACCESS FRONT | ACCESS REAR | CHASSIS CONSTRUCTION |
---|---|---|---|---|---|
IN-5A08-SQ-FF-FS | 1.3 m² | 3 Shelves + Base | Fixed front | Sliding doors | Stainless 304 and mild steel |
IN-5A08-SQ-SD-FS | 1.3 m² | 3 Shelves + Base | Sliding doors | Sliding doors | Stainless 304 and mild steel |
Dimensions & Mass
MODEL | H x W x D mm (Uncrated) | MASS (Uncrated) |
---|---|---|
IN-5A08-SQ-XX-FS | 1443 x 807 x 770 | 108 kg |
Note: Crated weights and dimensions vary. Please contact FPG for information on your shipment.
Diagrams and Dimensions Description
The following describes the key dimensions and views of the appliance:
- Plan View: Shows the appliance width (807mm Overall Appliance) and depth (770mm Overall Appliance). Internal dimensions include shelf width (730mm Shelf Width) and base width (748mm Base Width). The required benchtop cutout dimensions are 760mm x 725mm.
- Front Elevation: Displays the overall height of the appliance (1443mm (+30mm) Overall Appliance) and width.
- Section View: Illustrates the depth of the appliance and the arrangement of shelves. Key internal vertical measurements are indicated: 163mm (top section), 132mm (shelf 1), 132mm (shelf 2), 150mm (base). Total internal height is 683mm. The joinery height is 603mm.
- Rear Elevation: Shows the cable exit point (270mm from base) and cable length (3 meters).
Installation Notes
Model cutout dimensions for IN-5A08-SQ-XX-FS models require a 760mm x 725mm benchtop cutout. The joinery height required is 603mm. Refer to the product manual for detailed installation guidance. When installing this cabinet next to an adjacent Inline 5000 Series refrigerated cabinet, an Inline 5000 Series thermal divider panel (accessory) must be installed between them.
Options & Accessories
- Shelf trays: Available in toughened safety glass or mild steel. Colour and woodprint options are available for steel shelf trays.
- Front access: Tilt front option.
- Angled base insert.
- Branded decals.
- Rear door or end glass mirror application.
- Adjustable 100mm legs (+25mm adjustment), lockable castors, or unidirectional rollers.
- External stainless steel chassis surround.
- Rear deck assemblies.
- Thermal divider panels.
- Custom joinery solution.