Kruger&Matz KM1102 Digital Photo Frame

Disclaimer

All information in this manual is in accordance with the technical condition at the time of printing. The producer reserves the right to errors and misprints.

Safety Instructions

1. Protect this device from moisture, water, and other liquids. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
2. Keep the device out of the reach of children.
3. Device for indoor use only.
4. Do not attempt to repair this device yourself. In case of damage, contact an authorized service point for check-up or repair.
5. Before connecting the device to the power supply socket, ensure that the voltage indicated on the device matches the voltage in the power socket.
6. This appliance may be used by children aged 8 years and above and by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, if they are supervised and guided by a person responsible for their safety in a cautious manner, ensuring all safety precautions are understood and followed. Children should be supervised to ensure they do not play with the appliance. Children should not perform cleaning and maintenance of the device unsupervised.
7. Always disconnect the product from the power source before cleaning.
8. Clean this device with a soft, slightly damp cloth. Do not use chemical agents to clean this device.

Product Description

The digital photo frame has the following components:

• 1. Wall mounting bracket
• 2. Speaker
• 3. Power button
• 4. Stand bracket
• 5. microSD card slot
• 6. USB-C socket
• 7. Power adapter input socket

Operation

Connecting

Connect the power adapter plug to the power input on the device. Plug the adapter to a mains socket.

Turning On and Off

• The device will turn on automatically after plugging in the connected power adapter.
• To turn off the device, press and hold the power button and press the Turn off button. Attention: Do not power off the device by disconnecting the power adapter input.

Initial Configuration

After connecting the power to the frame for the first time, the initialization wizard will be shown.

1. Select the language and press the Next button.
2. Connect with the Wi-Fi network (you can skip this step, however it is recommended to download the newest updates).
3. Select the correct time zone and press the Next button.
4. If an update is available, press the Download and install button and wait for the update to install.
5. Input your username and the frame name. Press the Next button.
6. Read information about photo sharing. Press the Finish button to complete the configuration wizard.

Sharing Photos

With a Memory Card

1. Insert the microSD card into the memory card slot (with pins facing the screen).
2. The device will display a notification about detecting a memory card. Select the Import option.
3. Select pictures and press the Import button (in the top right corner).
4. After importing is finished, the pictures will be shown on the display.

With the Frameo App

To download the Frameo app, scan the QR code provided in the manual.

1. When running the app for the first time, the app will ask for a username (this username will be shown on the friends list on the frame).
2. After configuration is finished, the main screen of the app will be shown.
3. In the app, press the Add friend button.
4. In the frame, press the Add friend button. Input the code from the frame into the app.
5. After a few seconds, the app will be paired with the frame. From the photos list in the app, select a photo to export to the frame (to select multiple photos, press and hold one photo, and start selecting other photos).
6. Press the Transfer button. Select the target frame, input an optional description, and press the Next button.
7. Drag the circle to select the center part. Press the Transfer button. After a few seconds, the photo will be transferred and shown in the frame.

Attention: The app will ask for permission to read files on the phone. This permission must be granted to use the app.

Adding Reactions

Reactions can only be added to pictures sent from the Frameo app.

1. Tap on the picture and select React.
2. Select a reaction. A notification about the reaction will be sent to the Frameo app.

Photo Management

1. Open the main menu.
2. Go to the Picture management menu.
3. The menu allows for hiding, deleting, and managing pictures (import and export).

Slideshow Settings

1. Open the main menu.
2. Go to the Slideshow menu.
3. The menu allows for changing the slideshow settings.

Specifications

Display

• Size: 10.1" / IPS
• Resolution: 1280 x 800 px
• Aspect ratio: 16:10
• Touchpanel: 5-point touch

System and Parameters

• Operating system: Android 6.1
• CPU: Rockchip RK3126 Quad-core
• RAM: 1 GB
• Internal memory: 16 GB
• Maximum capacity of memory card: 32 GB
• USB-C port
• Mono speaker
• Wi-Fi: 802.11 b/g/n (2.4 GHz)
• Power supply: DC 5 V / 2 A

Physical Parameters

• Power supply: 100 - 240 V AC; 50/60 Hz
• Dimensions: 289 x 207 x 27 mm
• Weight: 671 g
• In set: stand, power supply, owner's manual

Radio Waves Specification

EU Declaration of Conformity

Lechpol Electronics Leszek Sp.k. hereby declares that the digital photo frame KM1100 is consistent with directive 2014/53/UE. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lechpol.pl.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Manufactured in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.