Kruger&Matz KM1100 Digital Photo Frame

Disclaimer

All information in this manual is in accordance with the technical condition at the time of printing. The producer reserves the rights to errors and misprints.

Safety Instructions

Please read this manual carefully and keep it for future reference.

• Protect this device from water, humidity, and other liquids. Avoid using or storing it in extreme temperatures. Do not expose it to direct sunlight or other heat sources.
• Keep the device out of the reach of children.
• Device is for indoor use only.
• Do not attempt to repair this device yourself. In case of damage, contact an authorized service point for check-up or repair.
• Before connecting the device to a power supply socket, ensure that the voltage indicated on the device corresponds to the voltage in the power supply socket.
• This appliance may be used by children aged 8 years and older, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they are supervised and guided by a person responsible for their safety. They must understand and follow all safety precautions. Children should be supervised to ensure they do not play with the appliance. Children should not perform cleaning and maintenance unsupervised.
• Always disconnect the product from the power source before cleaning.
• Clean this device with a soft, slightly damp cloth. Do not use any chemical agents for cleaning.

Product Description

Operation

Connecting

Connect the power adapter plug to the power input on the device. Plug the adapter into a mains socket.

Turning On and Off

• The device turns on automatically after being connected to the power adapter.
• To turn off the device, press and hold the power button, then press the "Turn off" button. Attention: Do not power off the device by disconnecting the power adapter.

Initial Configuration

After connecting the power to the frame for the first time, an initialization wizard will appear.

1. Select the language and press the "Next" button.
2. Connect to the Wi-Fi network (you can skip this step, but it is recommended to download the latest updates).
3. Select the correct time zone and press the "Next" button.
4. If an update is available, press the "Download and install" button and wait for the update to install.
5. Enter your username and frame name. Press the "Next" button.
6. Read the information about photo sharing. Press the "Finish" button to complete the configuration wizard.

Sharing Photos

With a Memory Card

1. Insert the microSD card into the memory card slot (with the pins facing the screen).
2. The device will display a notification about detecting a memory card. Select the "Import" option.
3. Select pictures and press the "Import" button (in the top right corner).
4. After importing is finished, the pictures will be displayed on the screen.

With the Frameo App

Scan the QR code to download the Frameo app:

[QR Code Placeholder]

1. When running the app for the first time, it will ask for a username (this username will be shown on the friends list on the frame).
2. After configuration is complete, the app's main screen will be shown.
3. In the app, press the "Add friend" button.
4. On the frame, press the "Add friend" button. Enter the code from the frame into the app.
5. After a few seconds, the app will be paired with the frame. From the photo list in the app, select a photo to export to the frame (to select multiple photos, press and hold one photo, and start selecting others).
6. Press the "Transfer" button. Select the target frame, enter an optional description, and press the "Next" button.
7. Drag the circle to select the center part. Press the "Transfer" button. After a few seconds, the photo will be transferred and shown on the frame.

Attention: The app will ask for permission to read files on your phone. This permission must be granted to use the app.

Adding Reactions

Reactions can only be added to pictures sent from the Frameo app.

1. Tap on the picture and select "React".
2. Select a reaction. A notification about the reaction will be sent to the Frameo app.

Photo Management

1. Open the main menu.
2. Go to the "Picture management" menu.
3. This menu allows for hiding, deleting, and managing pictures (import and export).

Slideshow Settings

1. Open the main menu.
2. Go to the "Slideshow" menu.
3. This menu allows for changing the slideshow settings.

Specifications

Display

• Size: 10.1" / IPS
• Resolution: 1280 x 800 pixels
• Aspect ratio: 16:10
• Touchpanel: 5-point touch

System and Parameters

• Operating system: Android 6.1
• CPU: Rockchip RK3126 Quad-core
• RAM: 1 GB
• Internal memory: 16 GB
• Maximum capacity of memory card: 32 GB
• microUSB port
• Mono speaker
• Wi-Fi: 802.11 b/g/n (2.4 GHz)
• Power supply: DC 5 V / 2A

Physical Parameters

• Power supply: 100 - 240 V AC; 50/60 Hz
• Dimensions: 255 x 172 x 18 mm
• Weight: 530 g
• In set: stand, power supply, owner's manual

Radio Waves Specification

Wi-Fi: Frequency: 2412-2472 MHz, Max. output power: 16.5 dBm

Declaration of Conformity

Lechpol Electronics Leszek Sp.k. hereby declares that the digital photo frame KM1100 is in compliance with Directive 2014/53/UE. The full text of the EU Declaration of Conformity is available at the following internet address: www.lechpol.pl.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.