Remington PR1340D, PR1362C, PR1385C Use and Care Guide

Product Registration

Register your new Remington product online at RemingtonProducts.com to receive special offers.

Important Safety Instructions

DANGER

• For connection to power sources outside the U.S.A. and Canada, use an appropriate plug adaptor.
• Do not reach for a plugged-in appliance that has fallen into water; unplug immediately.
• All models can be used wet or dry, in the shower, and rinsed under the faucet for cleaning.
• Detach the appliance from the power supply cord before cleaning.
• Do not place or store the appliance where it can fall into or be pulled into a tub or sink, or into water or other liquid.
• Unplug the appliance immediately after charging or using.

WARNING

• Never leave a plugged-in appliance unattended, except when charging a rechargeable appliance.
• Close supervision is necessary when used by, on, or near children or individuals with certain disabilities or special needs.
• Use only for intended purpose as described in this manual. Do not use unrecommended attachments.
• Never operate if the cord or plug is damaged, if it's not working properly, or if dropped or damaged, or into water.
• Keep the cord away from heated surfaces.
• Never drop or insert objects into appliance openings.
• Household use only.
• Do not use outdoors or where aerosol products are used or oxygen is administered.
• Always attach the plug to the appliance first, then to the outlet. To disconnect, turn controls to OFF, then remove plug.
• Always pull the plug, not the cord, to unplug from the wall socket.
• Do not plug or unplug with wet hands.
• Do not use extension cords or voltage converters.
• Do not wrap the cord around the appliance.
• Store in a moisture-free area, not exceeding 140°F (60°C).
• Detach removable power cords for storage.
• Do not use with a damaged head or cutters to avoid facial injury.
• The power unit is intended for vertical or floor mount orientation.
• Shavers and trimmers are for facial hair only, not head or body hair.

SAVE THESE INSTRUCTIONS

Product Features

Shaver Parts

1. Precision Plus Heads
2. Powerflex 360° Pivoting Head and Cutter Assembly
3. Head Release Button
4. On/Off Push Button
5. Charging Indicator
6. Power Port
7. Enhanced Pop-Up Trimmer
8. Stubble Attachment/Head Guard
9. Power Adaptor (not shown)

Product may vary slightly from illustrations.

Model Comparison

*Some shave times vary by model version. Refer to packaging or shaver back for model identification.

Feature Explanations:

• Turbo (PR1385C only): Power boost for shaving thick facial hair.
• Waterproof: Shaver can be used in shower with gels and cleaned under running water.
• Cordless: Shaver operates without the power adaptor cord.
• Quick Charge: 5-minute charge provides 5 minutes of shaving.
• 3 Stage LED Indicator (PR1340D, PR1362C): Blinking red = low battery; Pulsing green = charging; Light off = full charge.
• Fuel Gauge LED Indicator (PR1385C): Shows remaining charge (3 solid green = full, 2 solid green = 2/3 full, 1 flashing green = 1/3 full/low charge). All lights solid green for 5 mins then off at full charge.
• Worldwide Voltage: Shaver automatically adapts to 100V-240V outlets.

Charging

Before first use, charge for the full charge time for optimal battery performance.

1. Plug the power adaptor into the shaver (See Diagram A).
2. Plug the adaptor into a wall outlet (See Diagram B).
3. Refer to the model chart for full charge times.
4. Use the shaver until recharge is required.

For shavers with Quick Charge: A 5-minute quick charge provides 5 minutes of shaving.

Caution: Ensure the shaver and hands are dry when charging. Always charge in a cool, dry place.

Shaving

1. Press the power button to turn on (See Diagram C).
2. Shave face and neck using short, circular strokes (See Diagram D).
3. Use light pressure against the skin.
4. Pulling skin taut with the other hand helps low-lying hairs stand up for easier cutting.

Turbo Mode (PR1385C only): Press the power button a second time. Turbo mode is indicated by lights racing up the handle tracks.

Trimming

1. Press the trimmer release button to engage the trimmer (See Diagram E).
2. Trim long hairs and sideburns (See Diagram F).
3. Close the trimmer by pressing it down (See Diagram G).

Stubble Look

The stubble attachment comb helps maintain a 3-day stubble look. It cannot shave a full beard down to stubble length.

1. Clean shave face and let beard grow for 2-3 days.
2. Attach the stubble attachment to the cutting head.
3. Shave face with slow, rotating motions. The attachment trims hairs over 1.5 mm. Use light pressure for even results.
4. Shave every two days to maintain length; do not let hairs grow too long.
5. Detach the attachment for a clean-shaven look on areas without stubble.

Tips: Faster growing beard areas are trimmed first; slower areas fill in over days/weeks.

Shaving Tips With Gel or Foam (In Shower or Over Sink)

Note: Rinse shaver head thoroughly under water during and after shaving for optimal performance.

1. Apply water to face and neck.
2. Apply shave gel or foam.
3. Rinse shaver head under water.
4. Shave face and neck with short, circular strokes.
5. Rinse shaver head regularly during shaving to prevent residue buildup.
6. Rinse face when finished.
7. Thoroughly rinse shaver head of all gel or foam.
8. Follow cleaning and care instructions.

Cleaning and Care

Shaver can be cleaned under warm water.

Note: Ensure shaver is off and disconnected from the power cord before cleaning.

Caution: Use a damp cloth for external surfaces; do not use strong detergents or chemicals. Dry with a towel; do not use a hair dryer or heater.

Daily Cleaning:

1. Remove and rinse stubble attachment/head guard if used.
2. Press release button and open head assembly (See Diagram H).
3. Tap out excess hair shavings (See Diagram I).
4. Rinse shaver head under running water.
5. Leave head open for drying.
6. Close head assembly before next use (See Diagram J).
7. Reattach stubble attachment/head guard to protect shaving head until next use.

Weekly Cleaning:

1. Perform daily cleaning steps 1 and 2.
2. Remove hair pocket assembly cover (See Diagram K). Keep shaver body dry.
3. Slide blue inner cutter carrier down to release (See Diagram L).
4. Remove inner cutter carrier from cutters.
5. Remove cutters (See Diagram M).
6. Rinse inner and outer cutters thoroughly (See Diagram N).
7. Replace inner cutters, matching hub colors (See Diagram O).
8. Position inner cutter carrier and lock into place (See Diagram P).
9. Lubricate each cutter with household oil.
10. Align spring hinge into hair pocket slot and snap head assembly closed (See Diagram J).

Trimmer: Lubricate teeth with oil every six months.

Product Disposal

When the shaver reaches end of life, batteries must be removed for recycling or proper disposal according to state and local requirements. If not legally required, you may dispose of the shaver with the batteries.

To Remove Rechargeable Battery:

1. Unplug the shaver.
2. Run shaver until motor stops.
3. Remove head (Press release button, pull head away from shaver body).
4. Use a small screwdriver to pry the front cover off the shaver body.
5. Remove five screws located on the front of the shaver.
6. Remove the rear cover from the inner housing to expose batteries.
7. Pry batteries free from circuit board and cut wires.
8. Dispose of batteries.

Caution: Rechargeable batteries must be recycled or disposed of properly. Do not incinerate or mutilate, as batteries may burst or release toxic materials. Do not short-circuit, as this may cause burns.

Ordering Shaver Accessories

Maintain peak performance by replacing heads and cutters every 12 months.

Your shaver uses replacement part SPR-PR13.

Order Methods:

1. U.S. residents: Call 1-800-392-6544
2. U.S. residents: Order online at RemingtonProducts.com

Signs of head and cutter wear include skin irritation and a pulling sensation during shaving, indicating replacement is needed.

Warranty Information

Limited Three-Year Warranty

Spectrum Brands, Inc. warrants this product against defects due to faulty material or workmanship for three years from the original purchase date. Warranty excludes damage from accident or misuse. For defective products within the warranty period, replacement will be provided free of charge. Return product, sales receipt, name, address, and phone number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1, Deforest, WI 53532. Contact 800-736-4648 (U.S./Canada) for more information.

Warranty Exclusions: Heads and cutters.

The warranty does not cover products damaged by accident, misuse, abuse, alteration, unauthorized servicing, unauthorized accessories, incorrect current/voltage, or cord damage from wrapping.

Spectrum Brands, Inc. is not responsible for incidental, special, or consequential damages. Implied warranties are limited to three years.

This warranty provides specific legal rights, which may vary by state/province. Some states do not allow exclusion/limitation of incidental/consequential damages. This warranty is void where contrary to applicable laws, including those related to economic sanctions or trade restrictions.

Money-back Offers

Spectrum Brands, Inc. Money-back Offer

If not satisfied within 30 days of purchase, return the product with the sales slip to the retailer for a refund. Spectrum Brands, Inc. will reimburse retailers accepting returns within 30 days.

Remington 60-Day Money Back Guarantee*

If not completely satisfied within 60 days of purchase, return the product with the original dated sales receipt directly to Remington for a full refund.**

*Applies to U.S. and Canadian customers. **Terms and conditions apply.

Terms and Conditions for 60-Day Guarantee:

1. Refund issued in U.S. Dollars upon meeting all terms.
2. Return items postmarked within 60 days: product, original sales receipt (price/date), and completed 60-day guarantee form (RemingtonProducts.com/60day).
3. Product must have been used according to the instruction booklet.
4. Mail returns prepaid to: Remington 60-Day MBG, 507 Stokely Drive, Box 1, DeForest, WI 53532.
5. Refund excludes return postage costs but includes applicable taxes.
6. No responsibility accepted for late, lost, stolen, misdirected, or damaged product.
7. Allow 4-6 weeks for refund check.

For questions, call 800-736-4648 (U.S./Canada) or visit RemingtonProducts.com.