ULINE S-9947, S-9948, S-17942 Plastic Pail Lid Assembly Instructions

Tool Needed

[wrench] Rubber Mallet

Assembly Instructions

To Attach Lid

Using proper closing equipment, such as a plate or roller closure, is recommended. If this equipment is not available, follow the instructions below to avoid breaking the tear-band.

Align and Secure Lid

1. Place lid on top of container – make sure container rim and lid are lined up.
2. Use a rubber mallet to tap down the lid starting at point 1 (left of tear-tab).
3. Work clockwise around the lid tapping down each numbered point until lid snaps in place.

Caution: Do not hit the area over the tear-tab to prevent breakage.

Diagram Description

The diagram shows a circular plastic pail lid viewed from above. The lid has a series of numbered points around its outer edge, from 1 to 6, indicating where to apply pressure. Point 1 is located to the left of a visible tear-tab on the lid's edge. The instructions suggest tapping sequentially around these points.