Lefant M210 Series Robot Vacuum Cleaner User Manual

Introduction

Congratulations on the purchase of your Lefant ROBOTS! This user manual provides comprehensive information to ensure you get the most out of your Lefant M210 Series Robot Vacuum Cleaner. For any issues not covered, please contact Lefant ROBOTICS Customer Service at support@lefant.com or visit www.lefant.com.

Important Safety Instructions

WARNING: Read all safety warnings and instructions. Failure to follow these may result in electric shock, fire, or serious injury. This appliance is for household use only.

• Always follow basic precautions when using electrical appliances.
• The robot must be used according to this manual. The company is not liable for damages or injuries from improper use.
• Do not allow children to use the robot as a toy. Supervise children closely.
• Clear the cleaning area of power cords, small objects, and loose rug fringes. Lift curtains and table cloths.
• If there are stairs, ensure the robot can detect them or use a physical barrier to prevent falls.
• Use only manufacturer-recommended attachments.
• Ensure your power supply voltage matches the docking station's requirements.
• Do not handle the appliance with wet hands.
• Non-rechargeable batteries are prohibited.
• Do not operate without the dust bin and filters.
• Avoid operating in areas with lit candles or fragile objects.
• Do not use or store in extreme temperatures (below -5°C/23°F or above 40°C/104°F). Charge between 0°C/32°F and 40°C/104°F.
• Keep hair, loose clothing, fingers, and body parts away from openings and moving parts.
• Do not operate in rooms where infants or children are sleeping.
• For indoor use only. Do not use on wet surfaces or in outdoor, commercial, or industrial environments.
• Do not pick up large objects, flammable materials, or burning items.
• Do not block openings or use with blocked openings.
• Protect the power cord from damage. Do not pull or carry by the cord.
• If the power cord is damaged, it must be replaced by the manufacturer or service agent.
• Do not use the docking station if damaged.
• If the robot or docking station is not working properly, has been dropped, damaged, left outdoors, or contacted water, it needs repair.
• Turn off the power switch before cleaning or maintenance.
• Remove the plug from the receptacle before cleaning or maintaining the docking station.
• Remove the robot from the docking station and turn off the power before battery disposal. Dispose of batteries according to local regulations.
• Do not incinerate the robot, as batteries can explode.
• Unplug the docking station when not in use for extended periods.
• Prevent unintentional starting by ensuring the switch is off before connecting the battery pack or carrying the appliance.
• Keep battery packs away from metal objects to prevent short circuits.
• Avoid contact with battery liquid; flush with water if contact occurs. Seek medical help for eye contact.
• Do not use damaged or modified battery packs.
• Do not expose battery packs or the appliance to fire or excessive temperatures.
• Servicing should be performed by qualified personnel using identical replacement parts.
• Do not modify or attempt to repair the robot except as indicated.
• Do not operate in rooms with lit candles.
• Recharge only with the specified charger.
• Use only with designated battery packs.
• Battery replacement should be done by skilled persons; contact Customer Service for battery replacement.
• For long-term storage, fully charge the robot, power it off, and unplug the docking station.

Save These Instructions

To satisfy RF exposure requirements, maintain a separation distance of 20 cm or more between the device and persons during operation. Ensure compliance by not operating closer than this distance. The antenna must not be co-located with any other antenna or transmitter.

Correct Disposal of this Product

This marking indicates that the product should not be disposed of with household waste. Recycle responsibly using designated return and collection systems or contact the retailer.

Federal Communications Commission (FCC) Interference Statement

This equipment has been tested and found to comply with Class B digital device limits under Part 15 of the FCC Rules. These limits provide reasonable protection against harmful interference in residential installations. The equipment generates, uses, and radiates radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. However, interference is not guaranteed not to occur in a particular installation. If interference occurs, try the following:

• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect equipment to a circuit different from the receiver's.
• Consult a dealer or experienced technician.

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

RF exposure warning: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It must be installed and operated per instructions, and the antenna(s) must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating with any other antenna or transmitter.

Contents

1. Product introduction (Packing list, Part name)
2. Preparation (Assemble and charge, Using environment preparation)
3. Using the product (How to use buttons, App download and configuration, Maintenance)
4. Abnormal symptoms (Symptoms prompts, Troubleshooting)
5. Technical parameters

1. Product Introduction

1.1 Packing List

The package includes:

• Robot vacuum cleaner
• Docking Station & AC Adapter
• Dust bin
• High Efficient Particulate Air (HEPA) Filter
• Side brush
• Cleaning tool
• User manual

Note: Figures and illustrations are for reference only and may differ from actual product appearance. Product design and specifications are subject to changes without notice.

1.2 Part Name

Front View:

• Pannel
• Start/pause button
• Anti-collision sensor

Bottom View:

• Anti-falling sensor
• Universal wheel
• Charging electrode
• Side brush
• Suction mouth
• Drive wheel

Internal View:

• Power Switch (I=ON, O=OFF)
• Start/pause button
• Dust bin

Docking Station:

• Power adapter
• Indicator light
• Cleaning tool
• Infrared signal transmitter
• Charging electrode
• Power adapter socket

Dust bin Components:

• Pre-filter
• Snap Lock
• HEPA Filter

2. Preparation

2.1 Assemble and Charge

1. Remove the protective film from the robot and docking station.
2. Install the side brushes.
3. Place the charging base in an open area, connect the power supply, and tidy the power cord. Ensure at least 0.5m clearance on sides and 1.5m clearance in front.
4. Turn on the robot: "I" means ON, "O" means OFF. The robot cannot charge when turned off.
5. Charging: Place the robot on the docking station, aligning the charging electrodes. A twinkling light indicates charging; a solid light means fully charged. A full charge takes approximately 3.5 hours.

2.2 Using Environment Preparation

Tidy up the room:

• Organize items on the floor, such as wires, slippers, and other sundries, to avoid affecting the robot's operation.
• If rugs have fringed edges, tuck them under the rug.
• Do not let the robot operate on wet floors.
• Remove objects with a height of less than 12mm that you do not want the robot to climb onto.

3. Using the Product

3.1 How to Use Buttons

• Single press: Start/pause cleaning.
• Double press: Automatic return and charge.
• Keep pressing for 6 seconds: Enter Wi-Fi pairing mode.

Indicator Meaning:

3.2 App Download and Configuration

Downloading and installation of the “Lefant" app:

Method I: Scan the QR code provided and follow the prompts to download and install the app.

Method II: Search for "Lefant" in your app store, download, and install the app.

Note: The robot works with 2.4GHz Wi-Fi networks only.

Tips:

• Follow the in-app guidance to register, log in, and pair the robot.
• Ensure your mobile phone is connected to your Wi-Fi network before pairing.

3.3 Maintenance

When cleaning and maintaining the robot and its accessories, please unplug the charging stand.

Warning: The HEPA Filter should not touch water.

1. Open the faceplate and take out the dust bin.
2. Open the dust bin latch and dump the garbage.
3. Remove the filter assembly.
4. Clean the Pre-filter.
5. Clean the HEPA-filter.
6. Clean the anti-drop sensors to ensure sensitivity.
7. Clean the universal wheel to prevent hair tangling.
8. Clean the charging electrode to ensure successful charging.
9. Clean the suction mouth to avoid dust clogging.
10. Clean the driving wheel to ensure smooth operation.
11. Clean the Anti-collision sensors for obstacle avoidance.
12. Clean the side brush to prevent hair tangling.
13. Clean the charging electrode of the docking station for successful charging.

4. Abnormal Symptoms

4.1 Symptoms Prompts

When the robot encounters issues, its red indicator light will activate with specific beep patterns. The following table summarizes common faults and solutions:

* If the problem persists, turn the robot off and on using the power switch under the faceplate.

4.2 Troubleshooting

* If the fault cannot be eliminated, contact customer service.

5. Technical Parameters

Note: Since the product needs continuous improvement, the actual product shall prevail. Lefant reserves the right to update the product.

Warranty

This warranty covers repair or replacement of malfunction devices at Lefant's discretion for a period of 1 year. The certificate is void if altered. The serial number and all accessories must be provided for warranty coverage. Please fill in the form accurately.

Order Number: _________________________

Serial Number: _________________________

Date of Purchase: _________________________

Important: Pack the product carefully to avoid shipping damage. Shipping damage is not covered. Damage or loss not covered by this warranty or occurring outside the warranty period will incur fees for handling and shipping, borne by the Buyer.

Exclusion: The warranty will not apply to defects related to:

• Consumable parts (filters, brushes) subject to normal wear and tear.
• Defects caused by improper handling, accident, misuse, neglect, fire, water, lighting, or external sources like weather or power surges.
• Improper operation or maintenance, or use not in accordance with product instructions.
• Accident, abuse, misapplication, unauthorized repair, modification, or disassembly.
• Failure to adequately package the product for transportation.
• Use of parts not in accordance with product instructions or accessories not recommended by the company.
• Use in a commercial environment (product is designed for residential use only).
• Consequential and incidental damages.
• Products purchased from unauthorized dealers/resellers.
• Products used outside the country of purchase.
• Lost and/or stolen products.

Contact Information

Official website: www.lefant.com

Email: support@lefant.com

Facebook: @LEFANTOFFICIAL

Community: facebook.com/groups/Lefantofficalcommunity

Shenzhen Iohas Technology Co., LTD.
Building 2, Fashion Brand Industrial Park, E'Bu Town,
Shenzhen-Shanwei Special Cooperation Zone, Shenzhen, Guangdong, China.

M210-LH20220524-V01