Manuals+

VIVO Flip Down Keyboard Tray Wall Mount

MOUNT-FDKB1 Series

Assembly Manual

Individual Product SKUs: MOUNT-FDKB1, MOUNT-FDKB1-W

About VIVO

VIVO offers Better Products for a Better Workspace Experience. We are dedicated to creating high-end ergonomic solutions for the office with top-of-the-industry support. Explore Endless Workspace Solutions at www.vivo-us.com.

WARNING

If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Failure to report missing parts within 30 days may result in denial of free replacement. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. VIVO cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

WEIGHT LIMIT: 22lbs(10kg)

DO NOT EXCEED WEIGHT LIMIT. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY AND DAMAGE TO PROPERTY.

Need Help? We're Here For You

US-Based Customer Support from Trained Professionals

Monday-Friday from 7am-7pm CST
Saturday 8am-4pm CST

Assembly Video & Product Info: www.vivo-us.com/products/mount-fdkb1

Package Contents

Included Hardware & Tools

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

Tools Needed:

Drill Bit Sizes:

Mounting Options

Determine your desired mounting surface and follow instructions below.

Option 1: Drywall Mounting

STEP 1
Hold Keyboard Tray (A) onto the wall at the desired location. Use of a level is recommended.
Mark drilling locations on the narrow end of the holes using a Pencil.
(Visual: Diagram showing placement of tray on wall and marking points with a pencil. Checkmarks indicate correct placement, crosses indicate incorrect.)
Using a Drill and a 3/8" (10mm) Drill Bit, drill four holes according to the markings made above, approximately 8-15mm deep.

STEP 2
Fold the flaps on Drywall Anchors (W-D) and insert into the drilled holes. Secure Keyboard Tray (A) to the wall using ST3.5x50mm Mounting Screws (W-B) and a Phillips screwdriver.
(Visual: Close-up of inserting drywall anchor and securing tray with screws.)

Proceed to Page 14 for Securing Keyboard.

Option 2: Wood Stud Wall Mounting

STEP 1
Use a Stud Finder to locate studs. Hold Keyboard Tray (A) onto the wall at the desired location that aligns with wood studs. Use of a level is recommended.
Mark drilling locations on the narrow end of the holes using a Pencil.
(Visual: Diagram showing placement of tray on wall aligned with studs and marking points with a pencil. Checkmarks indicate correct placement, crosses indicate incorrect.)
Using a Drill and a 1/8" (3mm) Drill Bit, drill approximately 1.64" (40mm) deep into marked locations.

STEP 2
Secure Keyboard Tray (A) to the wall using ST4.8x38mm Screws (W-A) and a Phillips screwdriver.
(Visual: Close-up of securing tray to wood studs with screws.)

Proceed to Page 14 for Securing Keyboard.

Option 3: Concrete / Brick Wall Mounting

STEP 1
Hold Keyboard Tray (A) onto the wall at the desired location. Use of a level is recommended.
Mark drilling locations on the narrow end of the holes using a Pencil.
(Visual: Diagram showing placement of tray on wall and marking points with a pencil. Checkmarks indicate correct placement, crosses indicate incorrect.)
Using a drill and a 1/4" (6mm) Drill Bit, drill approximately 1.6" (40mm) deep into marked locations.

STEP 2
Press Concrete Anchors (W-C) into the drilled holes. Secure Keyboard Tray (A) to the wall using Mounting Screws (W-A) and a Phillips screwdriver.
(Visual: Close-up of inserting concrete anchors and securing tray with screws.)

Proceed to Page 14 for Securing Keyboard.

Securing Keyboard

Remove adhesive backing from Velcro Pads (D) and apply to the Keyboard Tray (A) and the bottom of your keyboard in matching positions. Press your keyboard onto the Keyboard Tray.

(Visual: Diagram showing application of Velcro pads to the tray and keyboard, and then pressing the keyboard onto the tray.)

Assembly Complete

Installation is now complete and your Keyboard Tray is ready for use. The tray can support up to 22lbs/10kg.

Models: MOUNT-FDKB1, MOUNT-FDKB1-W, MOUNT-FDKB1 Series Flip Down Keyboard Tray Wall Mount, MOUNT-FDKB1 Series, Flip Down Keyboard Tray Wall Mount, Down Keyboard Tray Wall Mount, Keyboard Tray Wall Mount, Tray Wall Mount, Wall Mount

File Info : application/pdf, 16 Pages, 4.64MB

PDF preview unavailable. Download the PDF instead.

MOUNT-FDKB1 Series REV2 online ?v=1750173119

References

Adobe PDF Library 17.0 Adobe InDesign 20.3 (Windows)

Related Documents

Preview VIVO Flip Down Keyboard Tray Wall Mount (MOUNT-FDKB1) - Instruction Manual
Detailed assembly instructions for the VIVO Flip Down Keyboard Tray Wall Mount (Model MOUNT-FDKB1). This guide covers installation on drywall, wood studs, and concrete/brick walls, including package contents, tools needed, and safety precautions.
Preview VIVO Clamp-on Height Adjustable Keyboard Tray Manual & Assembly Guide
Comprehensive instruction manual for the VIVO Clamp-on Height Adjustable Keyboard Tray (MOUNT-KB05HB/HA/HD/HW), detailing assembly steps, package contents, and usage guidelines.
Preview VIVO MOUNT-POLEKB Pole Mount Keyboard Tray Instruction Manual
Detailed instruction manual for the VIVO MOUNT-POLEKB pole mount keyboard tray, covering assembly steps, package contents, safety warnings, and support information.
Preview VIVO White Clamp-on Small Keyboard Tray Instruction Manual
This instruction manual provides detailed steps for assembling and installing the VIVO White Clamp-on Small Keyboard Tray (SKU: MOUNT-KB05ES-W). Learn about package contents, necessary tools, safety warnings, and contact information for support.
Preview VIVO MOUNT-KB05ES-N Vintage Brown Clamp-on Under-Desk Keyboard Tray - Instruction Manual
Instruction manual for the VIVO MOUNT-KB05ES-N Vintage Brown Clamp-on Small Keyboard Tray, detailing package contents, assembly steps, and support information.
Preview VIVO Clamp-on Extra Long Keyboard Tray Instruction Manual
Instruction manual for the VIVO Clamp-on Extra Long Keyboard Tray (MOUNT-KB15EB/EW), detailing package contents, tools needed, and assembly steps.
Preview VIVO Clamp-on Keyboard Tray for Corner Desk Instruction Manual
Instruction manual for the VIVO Clamp-on Keyboard Tray for Corner Desk (SKU: MOUNT-KB10C). Includes package contents, tools needed, and assembly steps.
Preview VIVO Freestanding Keyboard Tray Cart (CART-KB1A) Assembly Manual
Assembly manual for the VIVO Freestanding Keyboard Tray Cart, model CART-KB1A. Includes parts list, hardware, tools needed, and step-by-step assembly instructions.