Elitech RCW-600WIFI User Manual

Overview

The RCW-600WiFi is a two-channel temperature monitor utilizing IoT technology. It is designed for widespread use in industries such as food, catering, logistics, and HACCP. By integrating WiFi, the Elitech App, and a Cloud platform, users can remotely view, monitor, and manage data online through web browsers or smart devices. This wireless monitor features two temperature sensors and an integrated rechargeable lithium battery, enabling continuous real-time data uploading and alarm notifications, even during power outages or blackouts.

Features

• High sensitivity probe with a short response time.
• Operates for up to 6 hours after power supply cut-off.
• Configurable alarm thresholds with audio and visual alerts when thresholds are exceeded.
• Configurable uploading interval ranging from 1 minute to 24 hours.
• Stores 20,000 recording points on the device, with unlimited recording points on the Cloud server.
• WiFi access points for real-time data collection and upload to the Cloud platform.
• Flexible data exporting capabilities, allowing export in multiple formats via the Cloud platform.

Technical Parameters

• Power supply: 5V/1A (DC)
• Measurement range (Temperature): -40℃ to 80℃
• Accuracy (Temperature): ± 0.5℃ (-20℃ to 40℃); ± 1℃ (other ranges)
• Temperature resolution: 0.1°C
• Logging interval: 1 minute to 24 hours
• Memory capacity: 20,000 recording points
• Alarm output: LED indicator, buzzer, e-mails, Cloud platform/App push notification, etc.
• Uploading mode: WiFi
• Battery: 3.7V, 1100mAh rechargeable lithium battery

Appearance

The device features a display screen and control buttons. The screen shows:

• WiFi signal strength indicator.
• Battery level indicator.
• Current temperature values (e.g., TEMP: 26.5 °C, TEMP: 27.5 °C).

Control buttons include:

• [Menu/Confirm]: Menu button/Confirm button.
• [Left/Right Arrows]: Navigation button.
• [Back]: Return button.
• [Lock/Unlock]: Lock/unlock screen.
• Power indicator light.
• Alarm indicator light.

The front of the device is shown with temperature sensors connected.

Installation

The device requires connection of temperature sensors and a power adapter.

Front View: Shows the device with temperature sensors connected to the front panel.

Back View: Features the power adapter port, Power ON/OFF switch, reset hole, and temperature sensor port.

How to install the sensor: Plug the Temperature-humidity sensor into the sensor port by matching the correct pins.

Touch Buttons

The device is operated using the following touch buttons:

• [Menu/Confirm]: Enter the selected menu.
• [Left/Right Arrows]: Shift left/right to change the parameter.
• [Up/Down Arrows]: Shift up/down to select the desired menu option.
• [Back]: Back to previous windows.
• [Lock/Unlock]: Lock/unlock the screen.

GUID Information

To obtain the device GUID (Globally Unique Identifier):

1. Click the Menu button on the device.
2. Navigate the cursor to '5. ABOUT THIS PRODUCT' using the Up and Down keys.
3. Click the Menu button again to confirm and view the GUID (a 20-digit number).

This GUID is essential for registering the device with the Elitech Cloud platform.

WiFi Configuration

Turn on the monitor first and follow the setup steps below:

1. Connect to Device's Network

Use a smartphone or PCs to search and connect to the corresponding device's WiFi under the name of: '600wif*****'.

On PCs: Connect via WLAN settings.

On Phones: Connect via Wi-Fi settings.

2. Reset

Prick the Reset hole for 5 seconds to reset the device if you want to change the device's WiFi access. Keep the device on; prick the Reset hole for 5 seconds to restart the device. The symbol will show after reboot.

3. IP Address

Type the IP address in any web browser: http://192.168.2.1/.

4. Login

Default user name: admin. Default password: admin. A Windows Security prompt may appear requesting these credentials.

5. Settings

Step 1: Select "STA mode" and click "Next".

Step 2: Click "Scan".

Step 3: Select a desired WLAN, such as "ATK-CFBE".

Step 4: Click "OK".

Step 5: Enter the WLAN password.

Step 6: Click "Save".

Step 7: Click "Restart". A "Saved Successfully!" message will appear. Configurations will take effect after restart. It is recommended to restart after completing all settings.

Step 8: Rebooting Successful! The device is restarted successfully. You can choose to manually close the page or reconnect the WiFi module of the network and then log in to the configuration interface.

Elitech App

1. Download and Login

Please scan the QR code on the front of the manual or search "Elitech" on the App Store or Google Play to download the Elitech app. Register and log in to your account.

The app interface includes fields for username and password, with options for "Remember password", "Login", "Register now", and "Forgot password?".

2. Add Device

Follow the steps below and repeat the procedures in 'WiFi Configuration' to network the devices:

1. Click "+".
2. Click and scan the QR code on the back of the device.
3. Click "Add" and the device will be added.

The app interface shows options to add a device by scanning a QR code or manually entering details like Device Name and GUID.

Elitech Cloud

1. Login Cloud Portal

Please type in the URL http://www.i-elitech.com to login for more operation. Click "Help" to obtain Cloud and App operation instructions.

2. Top up SIM card (only for GPRS Version)

If your device is not a Wi-Fi one, please refer to the App Instruction Manual to recharge your SIM card. You may experience it for two months for free.