Smart Bird Feeder Camera with Solar Panel

Contents

• 1. Packing list
• 2. Product appearance
• 3. Bird Feeder Parts Name
• 4. Quick start
• 5. Set up the camera
• 6. Install Bird Feeder
• 7. Share the camera
• 8. Charge the camera
• 9. Indicator light status
• 10. Product specification
• 11. Firmware upgrade
• 12. FCC warning
• 13. FAQ

1. Packing list

The package includes:

• Feeder
• Bird Camera
• Material Tray
• Antenna
• Bird feeder bracket
• Fixed strap
• Fittings Bag 1
• Solar Panel (Optional)
• Fittings Bag 2 (Optional)

2. Product appearance

Bird Camera Components:

• Lens
• Spotlight
• Human body infrared sensor
• MIC
• Indicator light
• Speaker
• Bracket screw hole
• Power cord for charging
• Antenna hole
• Rear shell fastening screws
• Power button
• Reboot hole
• Micro-SD card slot
• Power input

3. Bird Feeder Parts Name

Main Unit:

• Solar Panel
• Bird Camera
• Bird feeding Area
• Bird Stand

Accessory Components:

• Antenna
• Power cord for charging
• Bird feeder bracket

4. Quick start

The wireless smart battery camera supports both battery-powered and AC-powered supply.

1. Download and install the App

The camera supports Android and iOS Apps. Scan the QR code or visit https://www.vicohome.io/download/ to download and install the app. Follow the on-screen instructions for user registration.

2. Add the device

Sign in to the App, connect to Wi-Fi, and add the device by following the prompts. Ensure the device is close to the router during configuration.

5. Set up the camera

In the App, click "Add Camera Now". Enter your Wi-Fi network name (SSID) and password. The camera supports 2.4GHz Wi-Fi only and does not support enterprise-level authentication. After entering the Wi-Fi details, click "Continue" to generate a QR code for pairing.

Pairing Process:

1. Press the power button for 3 seconds to turn on the camera. It will emit a "Ding Dong Ding Dong" sound. If no sound is heard, double-click the power button.
2. Face the camera lens towards the QR code displayed on your phone from approximately 20 cm (7 inches) away until you hear a "Ding" sound.
3. After a successful connection, the camera will provide a prompt sound. Name your device in the App and select its location. Click "Continue" to complete the pairing.

Possible problems with binding:

• "Wi-Fi Password Error": Verify the Wi-Fi password entered in the App.
• "Authentication error": Ensure your Wi-Fi network is not enterprise-level and uses a security level below WPA-2.
• "Wi-Fi not found": Check the Wi-Fi name, ensure the device is near the router, and that the router is powered on. 5GHz Wi-Fi is not supported.
• "Retrieving IP timeout": Too many devices may be connected to your router. Remove unused devices or restart the router. Contact your router administrator if necessary.
• "Cloud service connection fail": Check your router's connection to the external network. Ensure network connectivity is normal and temporarily disable firewalls if needed.

6. Install Bird Feeder

1. Select a good spot for your bird feeder:

Choose a location with good Wi-Fi coverage and frequent bird activity. Adjust the camera angle to cover the bird-watching stand. Recommended installation height is about 6 ft.

2. Install the host:

Assemble the upper cover:

Turn the upper cover down until it fastens onto the middle shell.

3. Install the tray:

Clamp the material tray to the bottom of the main body and secure it with three screws using a cross screwdriver.

4. Install an external antenna:

Position the external antenna at the back antenna hole of the bird feeder and tighten it.

5. Install the bracket:

Screw fixing:

Drill holes in the wall according to the bracket spacing. Mark the holes with a pencil before drilling. Insert expansion nuts into the holes and attach the bracket using screws.

6. Installation of bracket and Bird Feeder:

Tighten the hand screw through the iron bracket into the screw hole at the bottom of the bird feeder.

7. Install solar panels:

1. Fix the bracket on the wall.
2. Install the solar panel onto the bracket and secure it with a nut.
3. Adjust the solar panel's angle to maximize sunlight reception (0-360° rotation, 0-90° tilt).

7. Share the camera

This feature allows you to share camera access with family and friends. Only the administrator who first bound the camera can share and set the device. Other members can only view live feeds and playback recordings.

1. Find the camera:

On the App homepage or camera settings page, select the camera you wish to share. Click the share button to proceed to the sharing page.

2. Generate QR code:

Click "Invite" to generate a QR code for sharing.

3. Invite friends:

Ask your friends to download the software first. On the "User" page, find "Add Friend's Camera" to enter the scanning page.

4. Confirmation:

Scan the generated QR code with your mobile phone. You will receive a confirmation notification upon successful sharing. Agree to complete the sharing process.

8. Charge the camera

The App will notify you when the battery is low. Use the provided Type-C cable and a 5V/1.5A charging adapter to charge the camera. The indicator light will be solid yellow while charging and turn solid green when fully charged. Full charging takes approximately 14 hours.

9. Indicator light status

10. Product specification

11. Firmware upgrade

The App will notify you when a new firmware version is available. You can also manually check the firmware version in the App's settings.

Important: Ensure the camera is fully charged or connected to the power adapter before upgrading firmware. Do not disconnect the power supply during the upgrade process.

12. FCC warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example: use only shielded interface cables when connecting to computer or peripheral devices).

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

13. FAQ

1. Q: Camera permission management: How to invite family and friends to use my camera together?
   A: Open the App, select your camera on the home page, click the share button or "Share" in camera settings to enter the sharing page. Click "Invite" to generate a QR code. Your friends can then scan the QR code with their phone to gain access rights.
2. Q: Why doesn't the Wi-Fi name appear when I connect to Wi-Fi?
   A: On Apple devices with iOS 13 and above, enable "location permission" in the app's system settings and set it to "allow when using."
3. Q: Will the camera show red lights when night vision is activated?
   A: The built-in infrared lamp beads emit dim red lights for night vision, but the image quality remains clear in low-light conditions.
4. Q: What are the requirements for Wi-Fi?
   A: Use a 2.4GHz wireless network. 5GHz Wi-Fi is not supported. Set the Wi-Fi authentication method to WPA2-PSK or a lower security level. A password is required.
5. Q: How far should the camera be placed from the router?
   A: The Wi-Fi connection can reach up to 220 meters in open areas. Actual performance depends on Wi-Fi strength and environment (walls, electromagnetic devices, metal objects can interfere). If the signal is weak, place the camera closer to the router.
6. Q: What is the maximum length of recording time?
   A: If set to "Auto", the camera records for up to 3 minutes when motion is detected.
7. Q: How to quickly view videos by category?
   A: On the "Library" page, click the icon in the upper left corner to filter videos by category. Select a category and click "Save" to view playback.
8. Q: What should I do when the device is in malfunction?
   A: Long press the power button for 3 seconds to restart. If unresponsive, remove the rubber plug at the bottom of the camera and press the reboot hole with a pointed object.