Introduction and Safety Precautions
Important: Please read this user manual carefully and retain it for future reference.
Safety Precautions:
- Do not attempt to disassemble or replace any parts of the product unless specifically instructed in the manual.
- Do not expose the product to water or any other liquids, as it is not a waterproof design.
- If any liquid accidentally enters the product, immediately disconnect the connection and move the product away.
- Ensure your hands are dry when installing or uninstalling the product to avoid electric shock.
- Do not place the product near heat sources or expose it directly to fire.
- Avoid placing the product in an environment with strong electromagnetic forces, as this may cause malfunction.
Product Specifications
| Feature | Earbuds | Charging Case |
|---|---|---|
| Bluetooth Version | V5.3 | - |
| Transmission Distance | 10M | - |
| Battery Capacity | 30mAh | 220mAh |
| Usage/Playing Time | Approx. 5 hours | - |
| Charging Time | Approx. 1 hour | Approx. 1.5 hours |
| Rated Input | 5V ⎓ 30mA | 5V ⎓ 160mA |
(All technical information is subject to actual performance.)
Packing List
- Earphones x 2
- Charging Case x 1
- User Manual x 1
- Charging Cable (Type-C) x 1
Product Schematic Description
Earphones:
- MF Button (Touch Control Area): The touch-sensitive area on the earbuds used for controlling playback, calls, and voice assistant.
- Microphone: Integrated microphone for calls and voice commands.
- Type-C Charging Port: Located on the bottom of the earbud stem for charging within the case.
Charging Case:
- Charging Case: Houses and charges the earbuds. Features a lid to open and close.
- Type-C Charging Port: Located on the bottom of the case for charging the case itself.
- LED Indicator Status: The case display shows the power percentage when charging. During earbud charging, left/right bar indicators show a 'running' state; they turn off when fully charged.
Product Operation Instructions
1. Power On
- Method 1: Remove the earbuds from the charging case; they will automatically turn on and pair with each other.
- Method 2: When the earbuds are off, long-press the MF button on either earbud for 3 seconds.
2. Power Off
Long-press the MF button on either earbud for 5 seconds.
3. Pairing to a Bluetooth Device
- Take the earbuds out of the charging case. They will automatically turn on and pair with each other.
- On your smart device, open the Bluetooth list, search for "G06", and connect. (Single earbud use is supported).
4. Hands-Free Function (Incoming Call)
- Answer Call: Double-press the MF button on either earbud.
- Reject Call: Press and hold the MF button on either earbud for 2 seconds until you hear a "Tone", then release.
- Hang Up Call: Double-press the MF button on either earbud.
5. Activate Voice Assistant
(Requires smart device support for voice assistant)
- Activate: Press and hold the MF button on either earbud for 2 seconds until you hear a "Tone", then release.
6. Music Playback Mode
- Previous Song: Triple-press the MF button on the left earbud (L).
- Next Song: Triple-press the MF button on the right earbud (R).
- Volume Up: Single-press the MF button on the right earbud (R).
- Volume Down: Single-press the MF button on the left earbud (L).
- Pause/Play: Double-press the MF button on either earbud.
7. Restore Factory Settings
With the earbuds turned on and not connected to any Bluetooth device, continuously click the MF button 5 times to clear pairing information, then turn off the earbuds.
Charging the Case
Connect the included Type-C charging cable to a 5V power adapter and the charging port of the charging case. The charging case display will illuminate, showing the power percentage. When the charging case white light flashes quickly, please charge it promptly.
Earphone Charging Indicator Status
- Charging the charging case: The charging case display turns on, showing the power percentage.
- Earphones not fully charged: The left/right bar indicators on the display show a 'running' (marquee) state.
- Earphones fully charged: The indicator lights turn off.
Name and Content of Hazardous Substances in Products
This table is compiled in accordance with SJ/T 11364.
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Printed circuit assembly | ○ | ○ | ○ | ○ | ○ | ○ |
| Small structural parts such as shell | ○ | ○ | ○ | ○ | ○ | ○ |
Symbol Key:
- ○: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/T 26572.
- X: Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the limit requirements specified in GB/T 26572.
Parts marked with "X" are due to limitations in global technological development levels, preventing alternative substitution of hazardous substances.
Printed circuit board components*: include printed circuit boards and their parts, electronic components, etc. Depending on the product model, the product you purchased may not contain all the above components.
Electronic and electrical products sold in the People's Republic of China must mark the environmental protection use period symbol. The number in the logo represents the product's environmental protection use period under normal use conditions.
Warranty Service
Dear user, this warranty card is the proof of your future warranty application. Please cooperate with the seller to fill it out and keep it for future use!
User Information
- User Name: _________________________
- Contact Number: _________________________
- Mailing Address: _________________________
- Email: _________________________
- Postal Code: _________________________
Product Information
- Product Name: G06 True Wireless Earbuds
- Product Model: T102 / G06
- Product Barcode/Serial Number/Batch Number: _________________________
- Invoice Number: _________________________
Vendor Information
- Name: _________________________
- Address: _________________________
- Contact Number: _________________________
- Sales Date: _________________________
- Postal Code: _________________________
Remarks: _________________________
FCC Compliance Information
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
