M2PRO Wireless Vertical Mouse

Product Overview

The M2PRO Wireless Vertical Mouse is designed for ergonomic comfort and efficient use. This manual provides instructions for setup and operation.

[Diagram showing the M2PRO mouse from different angles, highlighting its vertical design and buttons.]

Specifications

Setup and Operation

Follow these steps to set up and use your M2PRO Wireless Vertical Mouse:

1. Insert the wireless receiver into a USB port on your computer.
2. Turn on the mouse using the power switch located on the bottom.
3. The mouse should automatically connect to the receiver. If not, press and hold the connection button on the mouse and receiver for a few seconds.
4. Adjust the DPI settings by pressing the DPI button located near the scroll wheel to select your preferred sensitivity.

[Diagram illustrating the connection process and button locations.]

[Diagram showing DPI adjustment steps.]

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Troubleshooting

If the mouse is not working:

• Ensure the battery is correctly inserted and charged.
• Check that the wireless receiver is properly plugged in.
• Try re-pairing the mouse with the receiver.
• Test the mouse on a different USB port or computer.

Care and Maintenance

Keep the mouse clean and dry. Avoid exposing it to extreme temperatures or moisture.