dB Technologies VIO X310 Quick Start Guide

Product Overview

The VIO X310 is a professional 3-way active speaker from dB Technologies. It features a coaxial neodymium transducer (4" MF, 2.5" HF, 1.4" exit) and two 10" neodymium woofers (2.5" voice coil). It offers a 90° (H) x 40° (V) coverage pattern with a rotatable horn for flexible installation. The integrated DigiPro G4 amplifier delivers 1400 W RMS power, controlled by a 32-bit DSP for detailed sound customization. RDNet connectivity allows for remote control and configuration via AURORA NET software.

Dimensions

The physical dimensions of the VIO X310 are:

• Width (W): 300 mm (11.8 in)
• Height (H): 780 mm (30.7 in)
• Depth (D): 430 mm (16.9 in)

Main Features

• Impressive sound pressure
• Rotatable horn
• Easy handling and transport
• Stack or flyable use
• AURORA Net control

Package Contents

The box contains:

• 1 x VIO X310 loudspeaker
• 1 x Mains cable
• 1 x Fuse for 100-120Vac power supply
• 1 x Transport cover
• Quick start and warranty documentation

Accessories

Optional accessories for mounting and configuration include:

• VB-3X10 bracket: For stacked or flyable use.
• HB-3X10 bracket: For stacked or flyable use.

Technical Specifications

I/O and Control Panel

The rear amplifier control panel features the following connections and controls:

• 1. USB Data Service: B-type USB port for firmware updating.
• 2. RDNet Data In / Data Out: RJ45 connectors for RDNet network connection, with associated control LEDs.
• 3. Balanced Audio Input/Output Link: XLR connectors for audio signal input and output linking.
• 4. DSP Preset Rotary Switch: Selects High Pass Filter (HPF) presets (e.g., 60Hz, 70Hz, 80Hz, 90Hz).
• 5. System Test Button: A button for system testing.
• 6. Status LEDs: Indicate Limiter, Signal, Mute/Protection, and Ready status.
• 7. Mains Input: POWERCON TRUE1 connector for full-range mains power input.
• 8. Mains Link Output: POWERCON TRUE1 connector for linking power to another speaker.
• 9. Mains Fuse: Housing for the mains fuse.

Status LED Indicators:

• Link LED: Illuminates when the RDNet network is active and the device is recognized.
• Active LED: Blinks when data transmission is present.
• Remote Preset Active LED: Indicates that local amplifier controls are bypassed and controlled remotely via RDNet.

Setup, Turn On, and I/O Settings

Audio Connection: Connect the audio input using an XLR cable. To link the audio signal to another speaker, use XLR connectors and connect the Output Link of the first speaker to the balanced Input of the second speaker.

Power Connection: Plug the supplied POWERCON TRUE1 cable into the Mains Input (7) to turn on the system. To daisy-chain power to another speaker, connect the Mains Link output (8) of the first speaker to the Mains Input (7) of the second speaker. Refer to the user manual for maximum connectable modules.

Remote Control (RDNet): Connect the Data Input (2) to a hardware remote controller (e.g., RDNet Control 2 or 8) using etherCON cables. Connect the Data Output of the first speaker to the Data Input of the second speaker for daisy-chaining. The Link LED indicates network activity.

Power Supply Specifications (Power Absorption)

• At 1/8 of full power (average use): 0.8 A (220-240V~) / 1.5 A (100-120V~)
• At 1/3 of full power (maximum use): 1.8 A (220-240V~) / 3.7 A (100-120V~)
• Idle (speaker on, no signal): 0.25 A (220-240V~) / 0.28 A (100-120V~)

INSTALLER NOTES: These values are for sizing purposes. Average use assumes infrequent clipping, while maximum use assumes frequent clipping or limiter activation.

Handles and Mechanical Fixing Points

Handles: Two handles are located on the rear of the loudspeaker for easy handling (A).

Mechanical Fixing Points: The loudspeaker features mechanical fixing points on each side (B) for stand mounting or flyable installations.

Configurations

The VIO X310 can be configured in various ways:

Stacked Configurations:

• Using VB-VIOX310 bracket.
• Using HB-VIOX310 bracket.

Flown Configurations:

• Using VB-VIOX310 bracket.
• Using HB-VIOX310 bracket.

Important Notes and Warnings

EMI Classification

This is a Class A equipment, designed for residential environments, compliant with EN 55032 and EN 55035 standards.

FCC Class A Statement

This equipment complies with Part 15 of the FCC Rules for Class A digital devices. It is designed for commercial environments and may cause interference in residential areas if not installed correctly.

General Warnings:

• Ensure secure installation to prevent injuries or property damage.
• Do not stack loudspeakers without proper fastening systems.
• Check all components for damage before installation.
• Avoid using outdoors in bad weather conditions.
• Contact dB Technologies for approved accessories. dBTechnologies is not liable for damages caused by unauthorized accessories.
• Product features and specifications are subject to change without notice.

Important Safety Instructions

1. Read and keep these instructions.
2. Heed all warnings and follow all instructions.
3. Do not use near water.
4. Clean only with a dry cloth.
5. Do not block ventilation openings; install per manufacturer's instructions.
6. Do not install near heat sources.
7. Do not defeat polarized or grounding-type plug safety features. Consult an electrician if the plug does not fit the outlet.
8. Protect the power cord from damage (pinching, walking on).
9. Use only manufacturer-specified attachments/accessories.
10. Use only with compatible carts, stands, tripods, brackets, or tables. Use caution when moving combinations.
11. Unplug during lightning storms or long periods of non-use.
12. Refer all servicing to qualified personnel. Servicing is required for damage, liquid spills, foreign objects, exposure to rain/moisture, abnormal operation, or drops.

Additional Safety Instructions

• No naked flame sources (e.g., lighted candles) should be placed on the apparatus.
• Do not use the apparatus in tropical climates.

General Warnings & Precautions

• Only expert personnel should use the product and accessories. Ensure stable and secure installation, complying with local safety regulations.
• Periodically check all parts for good working condition.
• Professional flown or stacked audio system installation, testing, and maintenance must be performed by authorized personnel. AEB Industriale is not liable for improper installation without adequate safety measures.
• Never suspend speakers from the handles. Use only specified accessories and follow their manuals.
• Do not obstruct amplifier cooling fins. Overheating reduces volume automatically until thermal stability is reached.
• Do not attempt to open the amplifier.
• In case of malfunction, turn off power, disconnect from mains, and contact an authorized service center.
• Use only the provided power cable.
• The USB data port is for firmware updates only; do not connect other USB devices to prevent damage.
• Avoid prolonged use with the limiter LED constantly lit or flashing, as this indicates operation under stress with excessive distortion.
• Periodically check the integrity and the functionality of accessories and technical equipment for safe installation. Users must not exceed the working load limits of any rigging components. Design, calculation, installation, testing, and maintenance of suspension and stack systems must be performed by qualified and authorized personnel. AEB Industriale s.r.l. disclaims responsibility for improper installations lacking safety requirements.

Documentation and Contact

Scan the QR code with your QR Reader App to download the complete User Manual.

A.E.B. Industriale Srl
Via Brodolini, 8
Località Crespellano
40053 VALSAMOGGIA (BO)
ITALY

Tel: +39 051 969870
Fax: +39 051 969725
Website: www.dbtechnologies.com
Email: info@dbtechnologies-aeb.com