S&P EC-N Series
Wall Mounted Fan Heaters
Serial EC-N | Model EC-9N
Product Description
The S&P EC-N Series fan heaters are designed to provide efficient heating for commercial or industrial environments. These units are built with a durable paint-coated steel sheet and feature a very quiet axial fan.
Key Features:
- Protection: IP24 rated, offering protection against splashing water.
- Operation Modes: A switch allows for adjustment between fan-only operation, fan with low heating, and fan with high heating.
- Thermostat Control: Equipped with a thermostat to set the desired room temperature. A rear switch enables the thermostat to control either the heater element and fan, or just the heater element (with the fan running continuously).
- Components: Includes a contactor and thermal protection with a manual self-resetting button (RESET).
Technical Characteristics
Model | Voltage (V) | Total Power (W) | Heating Power (W) | Maximum Current (A) | Speed (r.p.m.) | Maximum Airflow (m³/h) | Sound Pressure Level (dB(A)) | Temperature Rise (°C) | Protected Against Splashing Water | Air Speed in Discharge (m/s) | Weight (Kg) |
---|---|---|---|---|---|---|---|---|---|---|---|
EC-3N | 230 | 3033 | 1500/3000 | 13 | 1300 | 350 | 43 | 26 | IP24 | 2 | 9.7 |
EC-5N | 3N AC 400 | 5033 | 2500/5000 | 7.2 | 1300 | 450 | 43 | 33 | IP24 | 2.3 | 9.7 |
EC-9N | 3N AC 400 | 9050 | 4500/9000 | 13 | 1300 | 800 | 49 | 33 | IP24 | 2.4 | 15 |
EC-12N | 3N AC 400 | 12040 | 6000/12000 | 17.3 | 1370 | 1100 | 50 | 32 | IP24 | 3.3 | 17 |
EC-15N | 3N AC 400 | 15040 | 7500/15000 | 21.7 | 1370 | 1100 | 50 | 40 | IP24 | 3.3 | 17 |
* Sound pressure level at 1.5 meters, heater on the floor.
Dimensions
The following table provides the physical dimensions (A through F) for each model in the EC-N Series:
Model | A | B | C | D | E | F |
---|---|---|---|---|---|---|
EC-3N | 370 | 300 | 450 | 85 | 120 | 220 |
EC-5N | 370 | 300 | 450 | 85 | 120 | 220 |
EC-9N | 450 | 375 | 565 | 112 | 152 | 294 |
EC-12N | 450 | 460 | 565 | 112 | 152 | 294 |
EC-15N | 450 | 460 | 565 | 112 | 152 | 294 |
Installation Distances
For wall-mounted installations, the following minimum distances are recommended:
- Minimum 300mm clearance above the unit.
- Minimum 1800mm clearance in front of the unit.
- Minimum 300mm clearance to the sides of the unit.