S&P EC-N Series Wall-Mounted Electric Fan Heaters
Model: EC-9N
Product Overview
Wall-mounted fan heaters for fixed installation, designed to heat commercial or industrial premises.
Features:
- Protection against water splashes.
- IP24 rated.
- Manufactured from painted steel sheet.
- Very quiet axial fan.
- Rear switch allows selection of thermostat operation: acting on both fan and resistance, or only on resistance (fan operates permanently).
- Contactor.
- Thermal protector.
- Manual reset button (RESET).
[ErP Ready]
Technical Data
| Model | Voltage 50 Hz (V) | Total Power (W) | Heating Power (W) | Max Current (A) | Speed (r.p.m.) | Max Flow (m³/h) | Sound Level* dB(A) | Temperature Rise (°C) | Discharge Air Velocity (m/s) | Weight (kg) | Color |
|---|---|---|---|---|---|---|---|---|---|---|---|
| EC-3N | 230 | 3033 | 1500/3000 | 13 | 1300 | 350 | 43 | 26 | 2 | 9.7 | Grey |
| EC-5N | 3N AC 400 | 5033 | 2500/5000 | 7.2 | 1300 | 450 | 43 | 33 | 2.3 | 9.7 | Grey |
| EC-9N | 3N AC 400 | 9050 | 4500/9000 | 13 | 1300 | 800 | 49 | 33 | 2.4 | 15 | Grey |
| EC-12N | 3N AC 400 | 12040 | 6000/12000 | 17.3 | 1370 | 1100 | 50 | 32 | 3.3 | 17 | Grey |
| EC-15N | 3N AC 400 | 15040 | 7500/15000 | 21.7 | 1370 | 1100 | 50 | 40 | 3.3 | 17 | Grey |
*Sound pressure at 1.5 meters, unit on the floor.
Dimensions
| Model | A | B | C | D | E | F |
|---|---|---|---|---|---|---|
| EC-3N | 370 | 300 | 450 | 85 | 120 | 220 |
| EC-5N | 370 | 300 | 450 | 85 | 120 | 220 |
| EC-9N | 450 | 375 | 565 | 112 | 152 | 294 |
| EC-12N | 450 | 460 | 565 | 112 | 152 | 294 |
| EC-15N | 450 | 460 | 565 | 112 | 152 | 294 |
Diagram illustrating the dimensions of the fan heater. Labels A through F indicate specific measurements of the unit's housing and mounting points.
Installation Clearances
Diagram showing minimum installation clearances for wall mounting. Minimum 300mm clearance is required on the sides and above the unit. A minimum clearance of 1800mm is required below the unit.
