Living Spaces Owner's Manual

Table of Contents

• Parts List
• Installation Guide
• Function Introductions
• Operating Instructions
• Disassembly Instructions
• Audio System

Parts List

All electronics and components that need to be installed are located in bags under the foundation or attached to the frame. Before discarding the packing materials, ensure that all the parts are accounted for.

OPTIONAL EQUIPMENT (NOT INCLUDED)

Screwdriver [Screwdriver Image]

One person is required to set up the foundation. It takes about 5 minutes.

Detach the transformer and power cord from the back rail of the mech under the seat.

Installation Guide

1. Slide inside back receivers onto the steel mechanism posts in the base of the recliner. Press both sides of the back firmly into place until the back automatically locks into track. Zip up the seat cushion and back cushion.

   [Diagram showing back receivers and mechanism post]

   [Diagram showing zipper mechanism]

2. Flip the back flap up and connect all the cables accordingly. The headrest leadwires are yellow. The lumbar leadwires are grey.

   [Diagram showing cable connections: Headrest (yellow), Lumbar (grey), Vibrator]

3. Connect the power transformer to the socket at the bottom of the back of the recliner. Connect the Power Cord into the Power Transformer. Plug the power cord into a nearby outlet, still making sure it is clear of the metal base.

   [Diagram showing power transformer and power cord connection]

4. Fasten the back flap to the bottom of the furniture.

   [Diagram showing fastened back flap]

   DONE!

Function Introductions

Caution: Read the important instructions below before operating your power mechanized equipment. Do not allow children to play on or operate this power mechanized equipment.

Multi Media Control Panel [Multi Media Control Panel Image]

Side Control [Side Control Image]

Storage [Storage Image]

Cup Holder [Cup Holder Image]

Cup Holder [Cup Holder Image]

Notes:

• To help prevent shock and or damage to your product, only plug the power cord into a grounded outlet.
• Read the operating instructions carefully before operating your furniture.

Operating Instructions

SIDE CONTROL

[Diagram of Side Control Panel with labels: Memory Button, Auto Cycle Lumbar, Mood LED Lights Button, Headrest, Lumbar Support, Recline, Type-C, USB]

How to use Memory Function

Press and hold Memory Button and Auto Cycle Lumbar Button for 3 seconds. The LEDs on the memory buttons will flash to indicate that the hand control is in "set" mode. Press and hold the desired memory button to set the memory position. The LEDs will stop flashing. To go to a preset memory position, press and hold the desired memory button.

How to use Auto Cycle Lumbar Function

Press and hold for 1 second the Auto Cycle Lumbar button to activate the Auto Cycle Lumbar function. Press and hold for 1 second the Auto Cycle Lumbar button again to turn OFF the Auto Cycle Lumbar function.

How to Use Mood LED Lights

Press the Mood LED Lights buttons to activate the Mood LED function. Press the Mood LED Lights button again to cycle color through 16 colors. Press and hold for 3 seconds to close the LED lights.

Multi Media Control Panel

[Diagram of Multi Media Control Panel with controls for Volume, Treble, Bass, Vibration, Light, and Wireless Connection. Includes labels for adjusting each control and a headset jack.]

Turning On/Off the Speaker

Press and hold the volume adjustment knob to turn on the speaker. Press and hold again to turn off the speaker.

Wireless Connection Pairing Mode

Press and hold the wireless button (blue light flashes) to initiate pairing. The wireless device name is: Moto Media System. Once connected, the blue light stays on and you will hear a voice prompt: "Connected." If disconnected, the blue light will turn off and you will hear a voice prompt: "Disconnected."

Switching Broadcast Mode

1. Press the wireless button twice quickly; you will hear a voice prompt: "Broadcast mode." When connected, the red light stays on. Press the wireless button twice quickly again, and you will hear a voice prompt: "Broadcast off," which exits broadcast mode.
2. After the device connects via wireless connection, press the wireless button twice quickly (red light flashes) to enter broadcast mode; the blue light will turn purple. Press the wireless button twice quickly again to exit broadcast mode; the purple light will turn back to blue.

Using Broadcast Mode

When a device such as a phone or TV is connected to the wireless connection of Sofa A, press the wireless button twice quickly to switch to broadcast mode (purple light stays on). Then turn on the Sofa B speaker and press the wireless button twice quickly to switch it to broadcast mode (red light stays on). Sofa A will act as the signal source, and Sofa B will sync to play the audio or video from Sofa A.

Notes:

• Wireless connection search will automatically end after three minutes without connecting to any devices, and the flashing light will turn off. If you press the button during the flashing period, the search will end.
• Wireless connection mode has higher priority than broadcast mode. In broadcast mode, if different devices connect via wireless connection to play audio or video, broadcast mode will stop. If no playback occurs for about 4 seconds, it will re-search for other broadcast signal sources.
• If multiple sofas are connected to the same device via wireless connection, audio and video cannot be played simultaneously. The default is for the last connected sofa to play.
• Example: If sofas A, B, and C are all in broadcast mode (red light stays on), press and hold the wireless button (red light flashes) to connect to sofa A (purple light stays on). Sofas B and C will sync to play audio or video from sofa A. If the same device connects to sofa B (purple light flashes), sofa B and C will play normally, and sofa A will stop working. If you then connect to sofa C (purple light stays on), sofa C will play normally, while sofas A and B will not work. A restart is needed for playback.
• When using wireless connection to connect the main speaker sofa to a TV, there may be delays and instability. It is recommended to use a wired connection to the main speaker sofa and then use broadcast mode for wireless synchronization to other sofas.
• Please keep the wireless connection between devices within 10 meters.

Multimedia Control Box [Diagram of Multimedia Control Box showing POWER, SPEAKERS, INPUT, OUTPUT, SPDIF, AUX ports]

This is located at the bottom of the back of the recliner. AUX input, AUX output, and S/PDIF are located on the Multimedia Control Box. You can connect multiple devices by using a 3.5mm AUX cable connecting the AUX input to the audio source and then connecting another 3.5mm AUX cable from AUX output to the AUX input of the next Multimedia control box. 3.5mm AUX cable sold separately.

Disassembly Instructions

Unzip the seat cushion and back cushion, to remove the back from the base. Pull out the black tab by hand or use a screwdriver pressing outward on black tab, then lift the back from the recliner of the chair to release.

[Diagram showing unzipping and releasing the back cushion]

Screwdriver required (not included) [Diagram of screwdriver use]

SERIAL LABEL

Your serial number label is at the rear of the recliner, as the below picture.

[Diagram showing serial label location on the recliner]

FCC INSTRUCTION

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Audio System

PAIRING INSTRUCTION

Before you start. Switch on the pairing function on your mobile device. Make sure your power foundation is correctly connected and is power-on.

1. Pair with Audio System: Search for the audio device named "Moto Audio" on your device and establish a connection.
2. Music Playback: Once your devices are successfully connected, you can begin playing music through the audio system integrated into the power foundation.
3. Connection Range: Keep in mind that the effective range between the power foundation and your device is approximately 26 ft.

TROUBLESHOOTING

PRODUCT PROTECTED BY FOLLOWING PATENTS: Patented Articulating Power Headrest & Lumbar US Patent: 10, 736, 423 00976B

Immersive Entertainment System with Sync Technology

Congratulations on your new MotoMotion Immersive Entertainment Product(s)! You can connect to your audio source in 4 ways:

• Wireless (Bluetooth): Easily connect at the press of a button.
• SPDIF Digital Optical Cable: (sold separately)
• 3.5 mm Auxiliary Audio Cable: (sold separately)
• RCA to 3.5 mm Auxiliary Audio Cable: (sold separately)

Though this product can be wirelessly connected to your audio source, if you would like to connect using cables, please ensure you have the necessary cables prior to your product arriving. A convenient cable kit is available for purchase at MotoMotion.

Contents

• Get to Know Your Immersive Entertainment System - 1
• Our Patented Immersive Entertainment Components - 2
• Audio Source - 3
• Introducing Moto Sync Technology - 4
• Setup with Wireless (Bluetooth) Connection - 7
• Setup with SPDIF Digital Optical Cable(s) - 9
• Setup with 3.5mm Auxiliary Audio Cable(s) - 11
• Setup with RCA Audio Cable(s) - 13
• Appendix - 15
• Troubleshooting Guide Table - 19

Get to Know Your Immersive Entertainment System

Important: The amplifier can be in different places depending on the product. Here are some common locations:

• Sofa: Located behind the back flap of the middle seat. [Sofa location diagram]
• Console Loveseat: Located inside the console, accessible from the bottom via a zipper. [Console Loveseat location diagram]
• Recliner: Located inside either arm, accessible from the bottom via a zipper. [Recliner location diagram]
• Console: Located inside the console, accessible from the bottom via a zipper. [Console location diagram]

Moto Media Amplifier [Moto Media Amplifier diagram]

Our Patented Immersive Entertainment Components

• Transducers: Feel the sound come alive with tactile transducers! These are built into the seat and back of the recliners, syncing perfectly with the audio to boost your entertainment experience. [Transducers diagram]
• Full Range Speakers: Bring your movies, music, or video games to life. [Full Range Speakers diagram]
• Subwoofer: Our mighty subwoofer delivers the perfect punch of bass without bothering the neighbors. [Subwoofer diagram]
• Moto Media Amplifier: The 100-watt amplifier gives you all the power you need, no matter what you're watching or listening to. [Moto Media Amplifier diagram]
• Moto Media Controller: The stylish modern controller lets you adjust volume, treble, bass, and vibration separately. It also features pairing, broadcasting, and a headphone jack. [Moto Media Controller diagram]

Audio Source

It's important to know each device like a TV, gaming system, or tablet connects audio to other equipment in different ways, such as Bluetooth, SPDIF Digital Optical, 3.5mm Auxiliary, or RCA outputs. Make sure to check your audio output options on your device before delivery. Refer to following pages for different connection options.

[Diagram of TV, Game Controller, and Tablet]

Introducing Moto Sync Technology

Experience seamless audio with Moto Sync Technology. This innovative feature wirelessly broadcasts audio signals between all MotoMotion Entertainment product(s) equipped with the technology in the closeby area, eliminating the need for cables. Enjoy a clutter-free setup and immersive sound throughout your space.

It is suggested that one piece of your Immersive Entertainment products is connected by a cable to the audio source and then connect all other Immersive Entertainment products to the cabled/connected piece by Bluetooth.

How to Identify if Your MotoMotion Immersive Entertainment Product Has Moto Sync Technology:

• Check for the Moto Sync label on your Moto Immersive Amplifier.
• Refer to the owner's manual of your product.

[Diagram of Moto Immersive Amplifier with Moto Sync label and Owner's Manual]

LED Indicator

To activate or deactivate Broadcast Mode, double tap the pairing button; The system will announce “Broadcast On" or "Broadcast Off” to indicate the current status.

[Diagram of controller with Volume, Treble, Bass, Vibration, Pairing controls]

Diagram of Different Connections

Wireless: [Diagram showing wireless connection setup]

SPDIF: [Diagram showing SPDIF connection setup]

AUX: [Diagram showing AUX connection setup]

RCA-AUX: [Diagram showing RCA-AUX connection setup]

Establish connection to the audio source with one piece of furniture in one of connection options, then simply double tap the wireless pairing button on that piece to initiate "broadcast mode". Next, go to each of the other pieces and only double tap the pairing button to receive the established connection.

Setup with Wireless (Bluetooth) Connection

1. Switch your Moto Immersive Amplifier to AUX mode. [Diagram of amplifier ports]
2. Locate the audio control panel on your MotoMotion entertainment product(s).
   • Sofa Drop Down Table [Sofa location diagram]
   • Loveseat Inside the Console [Loveseat location diagram]
   • Recliner Inside the Arm Storage [Recliner location diagram]
3. Turn on Bluetooth on the device you want to connect.
4. Hold the pairing button on the audio panel for 5 seconds until the blue light blinks. [Diagram of controller with pairing button highlighted]
5. Find "Moto Media System" on your device (phone, tablet, TV, etc.) and select it to pair with the sound system. [Diagram of device pairing screen]

Note: If using an Aux cord or Digital cable, the wireless function will connect but won't play sound.

Setup with SPDIF Digital Optical Cable(s)

To get the best audio performance, setup your system with a digital optical cable. Each MotoMotion amplifier has one SPDIF Digital Optical Input Port.

1. Prepare the connection cable(s) and the digital optical splitter. The cable(s) you need for this setup is NOT included with your MotoMotion Immersive product(s) and can be purchased in a kit provided by MotoMotion. [Diagram of digital optical splitter]
2. Switch your Moto Immersive Amplifier to SPDIF mode. [Diagram of amplifier ports]
3. To set up a single MotoMotion Immersive product with your audio source, connect the digital optical cable to the SPDIF input port on your MotoMotion Immersive Amplifier. Then, connect the other end of the cable to the SPDIF output port on your audio source. [Diagram showing single connection]
4. If you want to connect multiple MotoMotion Immersive product(s) using SPDIF digital optical cables, you need to buy a digital optical splitter. Connect the digital optical splitter to your audio source and then run separate optical cables to each unit. [Diagram showing multiple connections with splitter]

Setup with 3.5mm Auxiliary Audio Cable(s)

Connecting your audio devices is a breeze with 3.5mm auxiliary cables as this is the most common parts for audio connections. If your device has a 3.5mm output port, you're all set - no extra hardware needed. Each MotoMotion amplifier comes equipped with both AUX IN and OUT ports, making it easy to handle both audio input and output.

1. The cable(s) you need for this setup is NOT included with your MotoMotion Immersive product(s) and can be purchased in a kit provided by MotoMotion. [Diagram of 3.5mm auxiliary cables]
2. Switch your Moto Immersive Amplifier to AUX mode. [Diagram of amplifier ports]
3. To set up a single MotoMotion Immersive product with your audio source, connect the 3.5mm auxiliary audio cable to the AUX input port on your MotoMotion Immersive Amplifier. Then, connect the other end of the cable to the AUX output port on your audio source. [Diagram showing single connection]
4. If you want to connect multiple MotoMotion Immersive product(s) using 3.5mm auxiliary audio cables, you can easily daisy chain them. Just plug a second 3.5mm auxiliary cable into the AUX output port of the first MotoMotion product and then into the AUX input port of the next one. [Diagram showing daisy chain connection]

Setup with RCA Audio Cable(s)

If you want to use the RCA (red and white) output from your audio source, you'll need to buy an RCA to 3.5mm AUX adapter cable before your MotoMotion Immersive product(s) arrives.

1. The necessary cables for this setup are NOT included with your MotoMotion Immersive product and can be purchased in a kit provided by MotoMotion. [Diagram of RCA cables and adapter]
2. Switch your Moto Immersive Amplifier to AUX mode. [Diagram of amplifier ports]
3. To set up a single MotoMotion Immersive product with your audio source:
   • Plug one end of the 3.5mm auxiliary audio cable into the AUX input port on your MotoMotion Immersive Amplifier.
   • Attach the RCA end of the adapter cable to the RCA output ports on your audio source. [Diagram showing single connection]
4. To connect multiple MotoMotion Immersive products, first connect the RCA to 3.5mm AUX adapter to your audio source. Then, plug the 3.5mm auxiliary cable into the AUX input port on the first product. Next, plug a second 3.5mm auxiliary cable into the AUX output port of the first product and into the AUX input port of the next one. [Diagram showing multiple connections]

Appendix

Terminology - Daisy Chain

Daisy Chain refers to the configuration where large-scale devices are connected in a series. In this context, it means linking each MotoMotion product sequentially to the next. [Diagram illustrating daisy chain connection]

Troubleshooting Guide Table

Immersive Entertainment System

Thank you for purchasing a Power Foundation.

Contact Customer Service Toll Free at 1-844-696-6886

Email: motoservice@hhcusacorp.com

www.motomotionfurniture.com