Black & Decker Garment Steamer - User Manual

Thank you for purchasing the Black and Decker® Garment Steamer. Your new Garment Steamer will change the way you press garments forever. Up to one hour of continuous steam and a telescopic design give you maximum flexibility to smooth away the wrinkles from hanging garments, drapes and even upholstery without having to use an iron or ironing board.

Important Safeguards

Safety Features

Grounded Plug

As a safety feature, this product is equipped with a grounded plug, which will only fit into a three-prong outlet. Do not attempt to defeat this safety feature. Improper connection of the grounding conductor may result in the risk of electric shock. Consult a qualified electrician if you are in doubt as to whether the outlet is properly grounded.

Tamper-Resistant Screw

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.

Damaged Power Cord

Note: If the power supply cord is damaged, it should be replaced by qualified personnel or in Latin America by an authorized service center.

General Precautions

• Read all instructions before use.
• Check appliance before each use by holding it away from body and operating steam button to reduce risk of contact with hot steam.
• Use appliance only for its intended purpose.
• To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
• Never yank the cord to disconnect from the outlet; instead, grasp the plug and pull.
• Do not allow the cord to touch hot surfaces.
• Let the appliance cool completely before storing. Loop the cord loosely around the appliance.
• Always disconnect the appliance from the electrical outlet when filling with water, emptying, or when not in use.
• Do not operate the appliance with a damaged cord, or if it has been dropped or damaged.
• To reduce the risk of electric shock, do not disassemble or attempt to repair the appliance. Take it to a qualified service person for examination and repair. Incorrect reassembly or repair could cause a risk of fire, electric shock, or injury to persons.
• Close supervision is necessary for any appliance used by or near children. Do not leave the appliance unattended while connected.
• Burns can occur from touching hot metal parts, hot water, or steam. Use care when turning a steam appliance upside down, as hot water may be present in the reservoir.
• To reduce the likelihood of circuit overload, do not operate another high wattage appliance on the same circuit.
• If an extension cord is absolutely necessary, a 12.5 ampere rated cord should be used. Cords rated for less amperage may overheat. Arrange the cord so that it cannot be pulled or tripped over.

Getting Familiar With Your Unit

Diagram showing the Black & Decker Garment Steamer unit with its components. The main unit consists of a base with a water tank, a telescopic pole, a flexible hose, and a steam nozzle at the top. Various parts are labeled with numbers 1 through 16.

Parts List:

• 1. Steam nozzle holder (Part # GSR10-03)
• 2. Steam nozzle
• 3. Steam nozzle button
• 4. Lint brush attachment (Part # GSR10-01)
• 5. Hanger holder
• 6. Clip for keeping hanger in place
• 7. Cord wrap
• 8. Telescopic pole
• 9. Flexible hose (Part # GSR10-08)
• 10. Trouser clamps (Part # GSR10-02)
• 11. Trouser clamps holder (Part # GSR10-05)
• 12. Lock nut for telescopic pole (Part # GSR10-04)
• 13. Removable water tank (Part # GSR10-06)
• 14. Water tank cap (not shown) (Part # GSR10-07)
• 15. Wheel casters (Part # GSR10-09)
• 16. Steam On/Off switch with indicator lights (?)

Assembly Instructions

Inserting Flexible Hose

1. Align connector prongs with holes on the unit and push inside the connector.

2. Slide the lock nut through the hose all the way to the end.

3. Place lock nut over the unit connector and twist clockwise (↪️) tightly in place.

Inserting Trouser Clamps Holder Assembly

For convenience, the trouser clamps can be used as a regular clip hanger at the top of the telescopic pole or to clip the bottoms of the pants.

1. Loosen the holder lock nut by turning it counterclockwise (↩️).

2. Find the slot at the bottom of the pole, insert and slide the holder assembly with the holder facing as shown.

Note: If using the trouser clamps as a regular clip hanger, slide the holder assembly to the top of the pole.

3. Secure assembly in place by twisting the lock nut clockwise (↪️) until it is tight.

Tip: Make sure the trouser holder is in the upright position.

4. Insert and push the trouser clamp bar securely into the holder.

Inserting Telescopic Tube

1. With the trouser clamp holder in place, remove the lock nut from the unit connector by turning it counterclockwise (↩️).

2. Insert the narrow end of the lock nut through the flat end of the telescopic pole.

3. Hold the telescopic pole and insert into the connector.

• a. Look inside the connector and find the alignment notch.
• b. Align the open slot at the end of the telescopic pole with the notch inside the connector and push the telescopic pole all the way inside. You might need to wiggle it to fit.

Important: The slot on the telescopic pole must slide over the notch inside the connector for the pole to slide into position.

4. Once the telescopic pole is inside the connector, twist the lock nut clockwise (↪️) until tight.

Inserting Steam Nozzle Holder Assembly

1. Pull up one extension tube at a time and tighten each lock nut by twisting clockwise (↪️).

2. Insert the steam nozzle holder assembly at the top of the telescopic pole and rotate it clockwise (↪️) until securely in place.

Steam Nozzle

1. Insert steam nozzle into its holder.

2. Attach the lint brush to the nozzle by inserting end tabs into the nozzle slots.

Your unit is now assembled!

How to Use

This appliance is for household use only.

Getting Started: Filling Water Tank

1. Make sure the unit is unplugged.
2. Place unit on the floor.
3. Grasp water tank handle and remove water tank.
4. Turn the water tank upside down and remove the cap by turning it counterclockwise (↩️).
5. Fill the water tank with water. Important: Do not add cleaning solutions or any other chemicals to the water in the tank. Only use regular tap water.
6. Replace the cap and tighten by turning it clockwise (↪️).
7. Insert water tank back into the unit securely in place.

Steaming Garments

Trousers

1. Make sure the unit is Off.
2. Using a clip hanger, hang the pants by the waist on the hanger holder.
3. Stretch the pants and clip the bottoms using the trouser clamps or move the trouser clamps holder to the top of the pole and using the trouser clamps, hang the pants by the waist.

Other Hanging Garments

Note: To steam other hanging garments, just hang your clothes on a regular hanger on the hanger holder.

Operation

1. Plug the unit into an electrical outlet.
2. Press the On/Off (I/0) switch. The switch and indicator lights (?) illuminate.
3. Remove the steam nozzle from its holder, facing upward and away from you.
4. Press the Steam button (▶️). The indicator lights on the unit illuminate, and in a few seconds, steam is released.

Important:

• Never place your hand in front of the steam nozzle where steam is being released.
• Do not leave the steam nozzle in one area for a long period of time, as the garment will get wet.

Use the lint brush (Part # GSR10-01) to remove lint from the fabric as it steams.

Automatic Shutoff

The unit shuts off automatically:

• After 30 minutes of inactivity.
• If the water tank is empty.

To use the unit again, turn Off then On and resume operation.

Care and Cleaning

This product contains no user-serviceable parts. Refer service to qualified service personnel.

Cleaning

1. Make sure the unit is off.
2. Wait for the unit to cool down completely before draining the water tank.
3. Remove water tank and drain any remaining water.
4. Wipe the outside surface with a damp cloth. Never immerse the unit in water or other liquids.

Storage

• Make sure the unit is off and unplugged.
• The unit stores vertically for compact storage. If you need more height, you can adjust the extension tubes.
• Insert the steam nozzle in its holder and wrap the cord around the cord wrap.

Important: If you want to leave your unit ready for daily use, just leave the water tank filled and in place.

Troubleshooting

Need Help? and Warranty

For service, repair, or any questions regarding your appliance, call the appropriate "800" number on the cover of this book. Do not return the product to the place of purchase. Do not mail the product back to the manufacturer nor bring it to a service center. You may also want to consult the website listed on the cover of this manual.

One-Year Limited Warranty (Applies only in the United States and Canada)

What does it cover?

• Any defect in material or workmanship; however, Applica's liability will not exceed the purchase price of the product.

For how long?

• One year after the date of original purchase.

What will we do to help you?

• Provide you with a reasonably similar replacement product that is either new or factory refurbished.

How do you get service?

• Save your receipt as proof of the date of sale.
• Check our on-line service site at www.prodprotect.com/applica, or call our toll-free number, 1-800-231-9786, for general warranty service.
• If you need parts or accessories, please call 1-800-738-0245.

What does your warranty not cover?

• Damage from commercial use
• Damage from misuse, abuse or neglect
• Products that have been modified in any way
• Products used or serviced outside the country of purchase
• Glass parts and other accessory items that are packed with the unit
• Shipping and handling costs associated with the replacement of the unit
• Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)

How does state law relate to this warranty?

• This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or province to province.

A list of service centers by country is provided in the original document.