Bona CombiEdge UX S/L Operating Manual

Introduction to the Bona CombiEdge UX S/L

This manual contains vital information for the safe operation and maintenance of the Bona CombiEdge UX S/L floor sander. It is crucial to read and understand this document before operating, adjusting, or servicing the machine to prevent potential injury or damage. The Bona CombiEdge UX S/L is designed for the dry sanding of wood floors and is suitable for industrial use in various settings such as hotels, schools, hospitals, offices, factories, and shops. Always ensure proper ventilation and adhere to all safety warnings and instructions provided herein.

For further assistance or to obtain a new manual, Bona AB can be contacted at Murmansgatan 130, P.O. Box 21074, SE-200 21 Malmö, Sweden, or by phone at +46 40 38 55 00. More information is also available on the official website: www.bona.com.

Key Features and Safety Information

The Bona CombiEdge UX S/L features a Ø 150 mm abrasive disc size and operates at a motor speed of 14000rpm. It is powered by an EU 230 V 50 Hz 1.15 KW motor. Safety is paramount, with features like a hand grip lever for starting control and a release switch for automatic power off. The machine is equipped with lifetime lubricated ball bearings and has a noise level of 85dB(A) max. Vibration is kept to a minimum, at ≤ 1.5 m/s².

Important Safety Reminders:

• Always wear appropriate personal protective equipment, including hearing protection, safety goggles, and a dust mask.
• Ensure the work area is well-ventilated and free from ignition sources, especially when sanding.
• Never operate the machine when tired or distracted.
• Keep hands, feet, hair, and loose clothing away from all moving parts.
• Always disconnect the power supply before performing any maintenance or adjustments.
• Use only approved cables and ensure they are in good condition.
• Never use the machine in wet conditions or for collecting hazardous dust.

Machine Specifications and Operation

The machine data plate provides essential details including model number, safety symbols, motor power, frequency, supply voltage, country of manufacture, and serial number. For electrical connection, ensure the voltage and frequency match the machine's requirements and that the power supply is properly grounded. The manual details the step-by-step process for starting the machine, including abrasive assembly procedures, and emphasizes keeping the machine moving while the abrasive disc is in contact with the surface.