Bona® Premium Spray Mop for Hardwood Floors

Assembly Steps

1. Attach Mop Pole to Mop Base:

   The silver Cartridge Release Button on the Lower Mop Pole (B) and the Bona logo on the mop base (C) should both be facing the front. Ensure that the swivel knuckle on the mop pole is facing down before attachment. Attach mop pole to mop base by aligning recessed slots in knuckle with tabs of similar size in mop base. Push to connect. Attachment should happen without excessive force. If not, tabs and recesses may not be aligned correctly.

2. Attach Upper Spray Mop Handle:

   Attach Upper Spray Mop Handle (A) to Lower Pole with Cartridge Enclosure (B) by aligning similar profiles of the poles and pushing together until a click is heard.

3. Attach Microfiber Cleaning Pad:

   Attach Bona® Microfiber Cleaning Pad to Mop Base by placing pad on the floor with the printed side facing up. Place the mop base over the center of the pad and press down firmly to attach. The Bona® logo on the Mop Base should face forward while mopping.

4. Insert Cleaning Cartridge:

   Remove cap from cleaning cartridge, and engage into the cartridge enclosure by pushing in until a click is heard. Your mop is now ready to use! When cartridge is empty, press the silver cartridge release button to disengage the cartridge before refilling.