Motorola Solutions XVE500 IMPRES Remote Speaker Microphone

RF Energy Exposure and Product Safety Guide

ATTENTION: Before using this product, read the RF Energy Exposure and Product Safety Guide that shipped with the radio. This guide contains instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

Warranty and Legal Notices

Warranty: Motorola Solutions offers warranty for your RSM. Refer to your Motorola Solutions dealer or point-of-purchase for detailed information. NOTE: Warranty is void after customer replacement of any parts other than replacement parts listed.

Open Source Software Legal Notices: This Motorola Solutions Product contains Open Source Software. For information regarding licenses, acknowledgements, required copyright notices, and other usage terms, refer to the Documentation for this Motorola Solutions Product at: http://businessonline.motorolasolutions.com. Navigate to Resource Center > Product Information > Manual > Accessories > Remote Speaker Microphones.

Product Overview and Operation

The XVE500 IMPRES Remote Speaker Microphone (RSM) is designed for clear communication, featuring DincX Noise Suppression. It connects to compatible Motorola Solutions radios.

Key Components:

• PTT (Push-to-Talk) Button
• 1-Dot Programmable Button
• 3-Dot Programmable Button

[Note] Programmable buttons can be configured to functions different from those on the radio. Refer to the radio's user manual for more information.

Best Transmit Practices:

• Hold the XVE500 1-2 inches (2-50 mm) from your mouth or SCBA voice port.
• Speak in a loud, clear, and controlled voice.
• Speak louder than the background noise.
• When practical, shake the XVE500 to clear water before transmitting.

Indicators

Light Indicators

[Note] Refer to the radio's user manual for more details and other states.

Emergency Indicators

[Note] Refer to the radio's user manual for more details and other states.

Indicator Descriptions:

• Orange Programmable Button: Glowing ORANGE
• Strobe: Blinking WHITE

Disabling Strobe and Cleaning

To Disable Strobe:

• Orange Programmable Button: Glowing ORANGE
• Strobe: Press and hold to turn on white Strobe. While Strobe is ON or blinking, press and hold to turn off.

Cleaning Procedure:

Warning: Do NOT use solvents to clean your RSM, as most chemicals may permanently damage the RSM housing and textures. Do NOT submerge the RSM in the detergent solution.

To clean the external surfaces of your radio, follow these procedures:

1. Vacuum the front surface of the RSM. Avoid completely covering the speaker grill and microphone openings all at once with the nozzle.
2. Mix one teaspoon of mild dish-washing detergent to one gallon of water (0.5% solution) to clean the external surfaces of the RSM.
3. Apply the solution sparingly with a stiff, non-metallic, short-bristled brush, making sure excess detergent does not get entrapped near the connectors, controls, or crevices.
4. Dry the RSM thoroughly with a soft, lint-free cloth.

Replacement Parts and Accessories

RSM Firmware Upgrades Notice

• The radio checks the RSM firmware version automatically after power up.
• Older RSM firmware will be upgraded automatically through the radio.
• RSM firmware upgrade process takes less than 20 seconds to complete.
• During firmware update, all buttons except PTT will not function, and the RSM power-up light may blink.
• The power-up light turns off to indicate that the RSM enters normal operation mode.

Additional Information

Refer to manual MN007340A01 for other languages at: https://learning.motorolasolutions.com