HOMCOM Armchair
Model: 839-866V00
Product Code: IN230700532V02_GL
General Information
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
For domestic use only.
Instructions for Use
- Place the chair stably on a flat floor.
- Keep away from open flames and heat sources.
- Avoid overloading the chair.
Precautions Before Assembly
- Prepare a clean and dry mounting area.
- Verify the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Regularly check the seating.
Storage Conditions
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Safety Warnings
Beware of crushing and cutting hazards during assembly. ⚠️
The manufacturer declines all responsibility in case of damages due to bad installation or external factors.
Warning! Replacement and repair of components for height adjustment of seating furniture with energy storage must only be performed by qualified personnel.
If the product has electrical parts:
This appliance can be used by children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- The appliance is only to be used with the power supply unit provided with the appliance.
- The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer shall be scrapped. [Damaged cord warning symbol]
- If the appliance has a heated surface, persons insensitive to heat must be careful when using the appliance.
- The power supply unit shall not be used if the pins of the plug part are damaged. [Damaged plug warning symbol]
Parts List
- Part A: Backrest x 1
- Part B: Seat Base x 1
- Part C: Side Panels x 1
- Part D: Armrests x 1
- Part E: Seat Cushion x 1
- Part F: Back Cushion x 1
- Part G: Support Brackets/Legs x 4
Hardware List
- Hardware H: M6*20 Screw x 16 (+1 spare)
- Hardware I: M6*25 Screw x 8 (+1 spare)
- Hardware J: Washer x 8 (+1 spare)
- Hardware K: Allen Key x 1
Assembly Instructions
Step 01
Place the seat base (B) and arrange other parts (A, C, D, F) for assembly.
Step 02
Attach the side panels (C) to the seat base (B).
Step 03
Assemble the base frame using hardware J (washers), K (Allen key), and I (M6*25 screws).
Step 04
Secure the underside of the chair frame using hardware H (M6*20 screws) and K (Allen key). Attach part G (support brackets/legs).
Step 05
Attach the armrests (D) to the main chair body.
Step 06
Attach the backrest (A) to the chair.
Step 07
Place the seat cushion (E) and back cushion (F) onto the chair.
Step 08
Assembly is complete. The chair is ready for use.
