HOMCOM Rocking Chair with Ottoman

Important Information

IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

Only for domestic use.

Instructions for Use

• Place the chair stably on a flat floor.
• Stay away from open flames.
• Avoid the overload at the chair.

Precautions Before Assembly

• Prepare a clean and dry mounting area.
• Verify that the product is not damaged.
• Check that none of the pieces are missing.

Maintenance

• Clean with a soft fabric.
• Check the seating regularly.

Storage Conditions

• The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.

General Warnings and Safety

Beware of crushing and cutting hazards during assembly.

The manufacturer declines all responsibility in case of damages due to a bad installation or external factors.

Warning! Only trained personnel may replace or repair components for height adjustment of seating furniture with energy storage.

Electrical Parts Safety:

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• The appliance is only to be used with the power supply unit provided with the appliance.
• The external flexible cable or cord of this transformer cannot be replaced; if the cord is damaged, the transformer shall be scrapped.
• If the appliance has a heated surface, persons insensitive to heat must be careful when using the appliance.
• The power supply unit shall not be used if the pins of the plug part are damaged.

Parts List

Components:

• Part 1: Seat/Back Cushion (x1)
• Part 2: Chair Frame (x1)
• Part 3: Ottoman Cushion (x1)
• Part 4: Ottoman Seat (x1)
• Part 5: Armrest (x2)
• Part 6: Rocker Base (x2)
• Part 7: Rocker Rail (Left and Right) (x1 pair)
• Part 8: Ottoman Leg (x4)
• Part 9: Seat Support (x2)

Hardware:

• Hardware A: Screw M6*18 (x16 + 1 spare)
• Hardware B: Screw M8*20 (x4)
• Hardware C: Screw M6*60 (x2)
• Hardware D: Washer M6*22 (x2)
• Hardware E: Allen Wrench (x1)

Assembly Instructions

Step 1: Attach Seat Support

Place the Seat/Back Cushion (Part 1) onto the Chair Frame (Part 2). Align the Seat Support (Part 9) with the designated slots on the frame and push down to secure.

Step 2: Secure Chair Frame

From the underside of the Chair Frame (Part 2), insert Washer (D) onto Screw (C, M6*60) and fasten through the frame.

Step 3: Attach Armrests and Rocker Bases

Attach the Armrests (Part 5) and Rocker Bases (Part 6) to the sides of the Chair Frame (Part 2) using Screws (A, M6*18).

Step 4: Attach Rocker Rails

Attach the Left (L) and Right (R) Rocker Rails (Part 7) to the Rocker Bases (Part 6) using Screws (B, M8*20).

Step 5: Assemble Ottoman

Attach the Ottoman Legs (Part 8) to the Ottoman Seat (Part 4) using Screws (A, M6*18).

Step 6: Complete Ottoman and Final Assembly

Place the Ottoman Cushion (Part 3) onto the assembled ottoman base. The rocking chair and ottoman are now assembled.