Manuals+

R2 Moving Head Lighting Fixture

User Manual

Introduction

Features

  • 4°-32° linear zoom
  • Aerial (3D) and graphic (2D) effects
  • Individual LED control, built-in color and effects macros
  • Layer effects (background/foreground)
  • Independent channel for CT correction
  • White color temp presets from 2700K ~ 8000K
  • Hue / Saturation / Tint adjustment (green ~ magenta)
  • Flawless 16-bit 540°/270° motorized pan/tilt movement
  • Selectable PWM frequency for flicker-free video with any camera
  • Locking pan and tilt for secure transportation
  • DMX, RDM, Artnet, sACN control

Specifications

Category Detail Value
PHOTOMETRICS Light Source 19 x 40W RGBWW LEDs
Linear zoom 4° - 32°
Output (lux) 38000lux @ 5 meters
POWER Mains 100-240 VAC, 50/60 Hz
Consumption 910W/120V, 858W/230V
Power connections PowerCon In/Out
KEY FEATURES Color mixing RGBWW
Macros Colors (+ crossfade), Patterns (+ crossfade), Strobe, Pan/Tilt
Layers Background layer dimming, strobe, patterns, colors, CT, tints and macros
Strobe 1 ~ 20Hz + strobe effect macros
Dimming 0-100% with 4 dimming curve modes
Pan/Tilt movement 540°/270°
CONTROL Protocol DMX, RDM
DMX channels 16 / 43 / 86
Data connections 3pin(or 5pin) XLR In/Out for DMX
Onboard menu TFT display with 4-button navigation
PHYSICAL Material Plastic and aluminium
Finish Matte black
IP rating IP20
Cooling Active (variable speed fan + silent mode)
Dimensions 419 x 277 x 510 mm
Weight 20 KG
Mounting Omega Bracket (included)

Package Contents

  • R2 Fixture
  • Power cable
  • User manual
  • Mounting brackets (2)
  • Warranty card

Dimensions

Diagram showing the physical dimensions of the R2 fixture from multiple views (front, side, top, bottom) with measurements indicated in millimeters: 292mm width, 427mm height, 277.4mm depth (front to back), 418.6mm width (base), 492.1mm height (with tilt), 178.5mm depth (head).

Overview

Illustration of the R2 fixture. Shows the main unit with its head tilted upwards. Labels point to the Omega bracket mounting plate, the Menu Display screen, and the Menu navigation buttons on the base unit. Another view shows the rear panel with connections labeled: DMX In/Out, Artnet In/Out, Fuse, and Power In.

Functions and Operation

Power On/Off

The fixture is powered on by connecting the included power cable to mains power (100 - 240 VAC, 50/60 Hz). Upon receiving power, the fixture will cycle through a motor reset program. To power off, disconnect the power cable or turn off power remotely using a switch.

Menu Navigation

The control panel features five-button navigation of the onboard menu. If the panel is password-protected, navigate to the Advanced menu, then the Menu locking submenu, and enter the Unlock code using the navigation buttons: 1234.

Diagram illustrating the menu navigation buttons and their functions:

Button Function
UP Increase the displayed value, or scroll through previous menu items.
DOWN Decrease the displayed value, or scroll through next menu items.
LEFT Return to higher menu levels.
RIGHT Advance displayed unit values by 10x and 100x.
ENTER Confirm displayed values, or activate displayed functions, or enter submenus.

Photometrics

Diagram showing beam spread and illuminance for a 4° beam angle. At 5 meters, illuminance is 38000 lux. At 10m, 9500 lux; at 15m, 4222 lux; at 20m, 2375 lux; at 40m, 594 lux.

Diagram showing beam spread and illuminance for a 34° beam angle. At 3 meters, illuminance is 3750 lux. At 5m, 1350 lux; at 10m, 338 lux; at 15m, 150 lux; at 20m, 84 lux.

DMX Addressing

DMX Starting Address

To set the starting address of each fixture:

  • Press the ENTER button and use the UP/DOWN buttons to scroll the menu.
  • Select the DMX ADDRESS menu and press ENTER.
  • Use the UP/DOWN buttons to scroll to the preferred address value.
  • Press ENTER to confirm the chosen DMX address.
  • Press the MENU button to save changes and exit.

Example of DMX Addressing

The table below shows an example of starting addresses for four fixtures, assuming the first fixture has a starting address of 001. Actual starting addresses will be determined by the operator to match external controller settings.

DMX ALLOCATION 1st Fixture 2nd Fixture 3rd Fixture 4th Fixture
16 channels 001 017 033 049

DMX Charts

14-Channel Mode

16 CH Function Value Percent/Setting
1Pan000-255Pan Coarse
2Pan Fine000-255Pan Fine
3Tilt000-255Tilt Coarse
4Tilt Fine000-255Tilt Fine
5Dimmer000-2550~100%
6Dimmer Fine000-2550~100%
7Red000-2550~100%
8Green000-2550~100%
9Blue000-2550~100%
10White000-2550~100%
11 Color Temperature 000-010 off
011-0402700K
041-0703200K
071-1004000K
101-1305600K
131-1606500K
161-1907000K
191-2207500K
221-2558000K
12 Tint 000-127 define the target point correction from Magenta to off
128-128off
129-255define the target point correction from OFF to Green
13Zoom000-2550~100%
14 Running Effect Colour Pattern
(Pattern turning only if Pattern Speed CH13 is on or automatic colour run)		 000-005 Off
006-010Effect 1 (Cross CW)
011-015Effect 2 (Circle 2 Step in > out)
016-020Effect 3 (Circle 2 Step Colour Change in > out)
021-025Effect 4 (Clock hand - CW)
026-030Effect 5 (Ventilator - CW)
031-035Effect 6 (Bow runs left >)
036-040Effect 7 (Bow runs down >)
041-045Effect 8 (3-line to 2-line)
046-050Effect 9 (diamond change)
051-055Effect 10 (Small circle 2 Dots run)
056-060Effect 11 (Circle 3step in > out)

14-Channel Mode (Continued)

16 CH Function Value Percent/Setting
14 Running Effect Colour Pattern
(Pattern turning only if Pattern Speed CH13 is on or automatic colour run)		 061-065 Effect 12 (2 Dots running on outer circle)
066-070Effect 13 (4 Dots - running on outer circle)
071-075Effect 14 Even/Odd
076-080Effect 15 Random Single Dots Jump
080-085Effect 16 Random Single Dots Fade
086-090Effect 17 Raindrop Jump
091-095Effect 18 Raindrop Fade
096-100Effect 19 All Effects
101-255All LEDs On
000-005Effect Pattern Speed Stop
006-127Effect Pattern Speed, slow > fast, forward
128-255Effect PatternSpeed, fast > slow, back
15 Pattern Speed 000-005 No Function
006-007Blackout while Moving on (Hold 3s)
008-009Blackout while Moving off (Hold 3s)
010-041Spare
042-043Invert Pan on (Hold 3s)
044-045Invert Pan off (Hold 3s)
046-047Invert Tilt on (Hold 3s)
048-049Invert Tilt off (Hold 3s)
050-073Spare
074-075Dimmer Response LED (Hold 3s)
076-077Dimmer Response Halogen (Hold 3s)
16 Device Settings 078-097 Spare
098-099Silent Fan on (Hold 3s)
100-101Auto Fan (Hold 3s)
102-119Spare
120-121LED Frequency 800Hz (Hold 3s)
122-123LED Frequency 1200Hz (Hold 3s)
124-125LED Frequency2000Hz (Hold 3s)
126-127LED Frequency 3600Hz (Hold 3s)
128-129LED Frequency 12KHz (Hold 3s)
130-131LED Frequency 25KHz (Hold 3s)
132-139Spare
140-141Display On (Hold 3s)
142-143Display Off (Hold 3s)
144-159Spare
160-161LED direction normal (Hold 3s) (Standard)
162-163LED direction mirrored (Hold 3s)
164-165Dimmer Curve Linear (Hold 3s)
166-167Dimmer Curve Exponential (Hold 3s)
168-169Dimmer Curve Logarithmic (Hold 3s)
170-171Dimmer Curve S-Curve (Hold 3s)
172-201Spare
202-203RAW-Mode (Hold 3s)
204-205User Calibrated-Mode (Hold 3s)
206-207Factory Calibrated-Mode (Hold 3s)
208-221Spare
222-223Reset Pan / Tilt (Hold 3s)
224-227Spare
228-229Reset Zoom (Hold 3s)
230-235Spare
236-237Reset All Functions (Hold 3s)
238-245Spare
246-255No function

43-Channel Mode

43 CH Function Value Percent/Setting
1Pan000-2550~100%
2Pan Fine000-2550~100%
3Tilt000-2550~100%
4Tilt Fine000-2550~100%
5Dimmer000-2550~100%
6Dimmer Fine000-2550~100%
7 Strobe 000-005 Strobe open
006-010Strobe closed
011-033Pulse Random, slow to fast
034-056Ramp up Random, slow to fast
057-079Ramp down Random, slow to fast
080-102Random Strobe Effect, slow to fast
103-127Strobe Break Effect, 5s.:.1s (Short burst with break)
128-250Strobe slow to fast (1Hz 20 Hz)
251-255Strobe open
8Red000-2550~100%
9Red Fine000-2550~100%
10Green000-2550~100%
11Green Fine000-2550~100%
12Blue000-2550~100%
13Blue Fine000-2550~100%
14White000-2550~100%
15White Fine000-2550~100%
16 Colour Macro
(override RGBW)		 000-005 no function
006-00946 Dark Magenta
010-01329 Plasa Red
014-01726 Bright Red
018-021127 Smokey Pink
022-02536 Medium Pink
026-02919 Fire
030-033135 Deep Golden Amber
034-037778 Millennium Gold
038-04121 Gold Amber
042-045157 Pink
046-049110 Middle Rose
050-053109 Light Salmon
054-05735 Light Pink
058-061134 Golden Amber
062-06517 Surprise Peach
066-069746 Brown
070-073105 Orange
074-07720 Medium Amber
078-081768 Egg Yolk Yellow
082-08515 Deep Straw
086-089767 Nectarine
090-093101 Yellow
094-097100 Spring Yellow
098-10188 Lime Green
102-105121 LEE Green
106-109738 Jas Green
110-11389 Moss Green
114-117139 Primary Green
118-121124 Dark Green
122-125323 Jade
126-129354 Special Steel Blue
130-133116 Medium Blue-Green
134-137183 Moonlight Blue
138-141132 Medium Blue
142-145119 Dark Blue
146-149716 Mikkel Blue
150-15371 Tokyo Blue
154-157181 Congo Blue
158-161799 Special KH Lavender
162-165707 Ultimate Violet
166-169343 Special Medium Lavender
170-173798 Chrysalis Pink
174-177701 Provence
178-181797 Deep Purple
182-18548 Rose Purple
186-189345 Fuchsia Pink
190-193795 Magical Magenta
194-197128 Bright Pink
198-2012 Rose Pink
202-204Colour Jumping Stop
205-230Colour Jumping Speed slow -> fast / Colour 1 -> 49
231-255Colour Fading Speed slow -> fast / Colour 1 -> 49
17 Color Macro Crossfade 000-005 0s
006-2550,1s - 10s
18 Colour Temperature 000-010 OFF
011-0402700 K
041-0703200 K
071-1004000 K
101-1305600 K
131-1606500 K
161-1907000 K
191-2207500 K
221-2558000 K
19 Tint 00-127 Magenta correction to OFF
128-128OFF
129-255OFF to Green correction
20Zoom000-255narrow-wide
21Zoom Fine000-2550% to 100%
22 Selection Folder 000-005 OFF
006-064Pattern 1
065-128Pattern 2
129-255Running Effect Pattern

43-Channel Mode (Continued)

43 CH Function Value Percent/Setting Remark
23 Pattern 1 000-005 Off ("Wash Mode") adding with RGBW or Colour Macros & sep. Background functions)
006-0101
011-0152
016-0203
021-0254
026-0305
031-0356
036-0407
041-0458
046-0509
051-05510
056-Nov-49
251-25550
Pattern 2 000-005 Off("Wash Mode") Nr. 51 -99 (adding with RGBW or Colour Macros & sep. Background functions)
006-01051
011-01552
016-02053
021-02554
026-03055
031-03556
036-04057
041-04558
046-05059
051-05560
056-61-99
251-255100
23 Running Effect Colour Pattern (when CR2 = 129-255 ) 000-005 Off
006-010Effect 1 (Cross CW)
011-015Effect 2 (Circle 2Step in > out)
016-020Effect 3 (Circle 2Step Colour Change in > out)
021-025Effect 4 (Clock hand - CW)
026-030Effect 5 (Ventilator - CW)
031-035Effect 6 (Bow runs left >)
036-040Effect 7 (Bow runs down >)
041-045Effect 8 (3-line to 2-line)
046-050Effect 9 (diamond change)
051-055Effect 10 (Small circle 2 Dots run)
056-060Effect 11 (Circle 3step in > out)
061-065Effect 12 (2 Dots running on outer circle)
066-070Effect 13 (4Dots - running on outer circle)
071-075Effect 14 Even/Odd
076-080Effect 15 Random Single Dots Jump
080-085Effect 16 Random Single Dots Fade
086-090Effect 17 Raindrop Jump
091-095Effect 18 Raindrop Fade
096-100Effect 19 All Effects
101-255All LEDs On
24Pattern Speed000-005
006-127
128-255		Effect Pattern Speed Stop
Effect Pattern Speed, slow > fast, forward
Effect Pattern Speed, fast > slow, back
25Pattern Transition000-005
006-255		Stop
0.1s - 5s
26RunningEffect Pattern
Fade
Wake		000-005
006-127
128-255		Off
Fade Effect Pattern less -> much
Wake Effect Pattern less -> much

43-Channel Mode (Continued)

43 CH Function Value Percent/Setting
27 Background Dimmer
(All Background functions are enabled with Pattern enabled)		 000-255 Master Dimmer 0-100%
000-255 Master Dimmer 0-100%
29 Background Strobe 000-005 Strobe open
006-010Strobe closed
011-033Puls Random, slow to fast
034-056Ramp up Random, slow to fast
057-079Ramp down Random, slow to fast
080-102Random Strobe Effect, slow to fast
103-127Strobe Break Effect, 5s.:.1s (Short burst with break)
128-250Strobe slowto fast (1Hz-20 Hz)
251-255Strobe open
30Background Red000-2550~100%
31Background Red Fine000-2550~100%
32Background Green000-2550~100%
33Background Green Fine000-2550~100%
34Background Blue000-2550~100%
35Background Blue Fine000-2550~100%
36Background White000-2550~100%
37Background White Fine000-2550~100%
38 Background Colour Macro
(override RGBW)		 000-005 no function
006-00946 Dark Magenta
010-01329 Plasa Red
014-01726 Bright Red
018-021127 Smokey Pink
022-02536 Medium Pink
026-02919 Fire
030-033135 Deep Golden Amber
034-037778 Millennium Gold
038-04121 Gold Amber
042-045157 Pink
046-049110 Middle Rose
050-053109 Light Salmon
054-05735 Light Pink
058-061134 Golden Amber
062-06517 Surprise Peach
066-069746 Brown
070-073105 Orange
074-07720 Medium Amber
078-081768 Egg Yolk Yellow
082-08515 Deep Straw
086-089767 Nectarine
090-093101 Yellow
094-097100 Spring Yellow
098-10188 Lime Green
102-105121 LEE Green
106-109738 Jas Green
110-11389 Moss Green
114-117139 Primary Green
118-121124 Dark Green
122-125323 Jade
126-129354 Special Steel Blue
130-133116 Medium Blue-Green
134-137183 Moonlight Blue
138-141132 Medium Blue
142-145119 Dark Blue
146-149716 Mikkel Blue
150-15371 Tokyo Blue
154-157181 Congo Blue
158-161799 Special KH Lavender
162-165707 Ultimate Violet
166-169343 Special Medium Lavender
170-173798 Chrysalis Pink
174-177701 Provence
178-181797 Deep Purple
182-18548 Rose Purple
186-189345 Fuchsia Pink
190-193795 Magical Magenta
194-197128 Bright Pink
198-2012 Rose Pink
202-204Colour Jumping Stop
205-230Colour Jumping Speed slow -> fast / Colour 1 -> 49
231-255Colour Fading Speed slow -> fast / Colour 1 -> 49
39 Background Color Macro Crossfade 000-005 0s Transition Time between Color Macros - effects only Color Macros if active between the Colors
006-2550,1s - 10s
40 Background Colour Temperature 000-010 OFF (affects RGBW and Colour Macros)
011-040270 0K
041-070320 0K
071-100400 0K
101-1305600K
131-1606 500K
161-190700 0K
191-2207500K
221-2558000K
41 Background Tint 000-127 Magenta correction to OFF Linear Tint setting,
Only effect at active Colour Temperature
128-128OFF
129-255OFF to Green correction
42 Pan/Tilt Speed 000-005 Pan/Tilt Movement Fast to Slow
000-005No Function
006-007Blackout while Moving on (Hold 3s)
008-009Blackout while Moving(ffold 3s)
010-041Spare
042-043Invert Pan on (Hold 3s)
044-045Invert Pan off (Hold 3s)
046-047Invert Tilt on (Hold 3s)
048-049Invert Tilt off (Hold 3s)
050-073Spare
074-075Dimmer Response LED (Hold 3s)
076-077Dimmer Response Halogen (Hold 3s)
078-097Spare
098-099Silent Fan on (Hold 3s)
100-101Auto Fan (Hold 3s)
102-119Spare

43-Channel Mode (Continued)

43 CH Function Value Percent/Setting
43 Device Settings 120-121 LED Frequency 800Hz (Hold 3s)
122-123LED Frequency 1200Hz (Hold 3s)
124-125LED Frequency2000Hz (Hold 3s)
126-127LED Frequency 3600Hz (Hold 3s)
128-129LED Frequency 12KHz (Hold 3s)
130-131LED Frequency 25KHz (Hold 3s)
132-139Spare
140-141Display On(Hold 3s)
142-143Display Off(Hold 3s)
144-159Spare
160-161LED direction normal (Hold 3s) (Standard)
162-163LED direction mirrored (Hold 3s)
164-165Dimmer Curve Linear(Hold 3s)
166-167Dimmer Curve Exponential(Hold 3s)
168-169Dimmer Curve Logarithmic (Hold 3s)
170-171Dimmer Curve S-Curve(Hold 3s)
172-201Spare
202-203RAW-Mode (Hold 3s)
204-205User Calibrated-Mode (Hold 3s)
206-207Factory Calibrated-Mode (Hold 3s)
208-221Spare
222-223Reset Pan / Tilt (Hold 3s)
224-227Spare
228-229Reset Zoom (Hold 3s)
230-235Spare
236-237Reset All Functions (Hold 3s)
238-245Spare
246-255No function

86-Channel Mode

86 CH Function Value Percent/Setting
1Pan000-2550~100%
2Pan Fine000-2550~100%
3Tilt000-2550~100%
4Tilt Fine000-2550~100%
5Dimmer000-2550~100%
6Dimmer Fine000-2550~100%
7 Strobe 000-005 Strobe open
006-010Strobe closed
011-033Pulse Random, slow to fast
034-056Ramp up Random, slow to fast
057-079Ramp down Random, slow to fast
080-102Random Strobe Effect, slow to fast
103-127Strobe Break Effect, 5s.:.1s (Short burst with break)
128-250Strobe slow to fast (1Hz20 Hz)
251-255Strobe open
8Red1000-2550~100%
9Green1000-2550~100%
10Blue1000-2550~100%
11White1000-2550~100%
12Red2000-2550~100%
13Green2000-2550~100%
14Blue2000-2550~100%
15White2000-2550~100%
............
80Red19000-2550~100%
81Green19000-2550~100%
82Blue19000-2550~100%
83White19000-2550~100%
84 Zoom 000-255 narrow-wide
85 Zoom Fine 000-255 0% to 100%
000-005No Function
006-007Blackout while Moving on (Hold 3s)
008-009Blackout while Movingf(Hold 5s)
010-041Spare
042-043Invert Pan on (Hold 3s)
044-045Invert Pan off (Hold 5s)
046-047Invert Tilt on (Hold 3s)
048-049Invert Tilt of (Hold 5s)
050-073Spare
074-075Dimmer Response LED (Hold 3s)
076-077Dimmer Response Halogen (Hold 3s)
078-097Spare
098-099Silent Fan on (Hold 3s)
100-101AutoFan (Hold 3s)
102-119Spare
120-121LED Frequency800 Hz (Hold 3s)
122-123LED Frequencyl 200 Hz (Hold 3s)
124-125LED Frequency2000 Hz (Hold 3s)
126-127LED Frequency 360 Hz (Hold 3s)
128-129LED Frequencyl 2 KHz (Hold 3s)
130-131LED Frequency 25 KHz (Hold 3s)
132-139Spare
140-141Display On (Hold 1s)
142-143Display Of (Hold 1s)
144-159Spare
86 Device Settings 160-161 LED direction normal (Hold 3s) (Standard)
162-163LED direction mirowed (Hold 3s)
164-165Dimmer Curve Linear(hold 1s)
166-167Dimmer Curve Exponential (Hold 1s)
168-169Dimmer Curve Logarithmic (Hold 1s)
170-171Dimmer Curve S-Curve (Hold 1s)
172-201Spare
202-203RAW-Mode (Hold 3s)
204-205User Calibrated-Mode (Hold 3s)
206-207Factory Calibrated-Mode (Hold 3s)
208-221Spare
222-223Reset Pan / Tilt (Hold 3s)
224-227Spare
228-229Reset Zoom (Hold 3s)
230-235Spare
236-237Reset All Functions (Hold 3s)
238-245Spare
246-255No function

Pixel Map

PIXEL ORDER : Refer to the illustration below for programming order of the R2 LEDs.

Diagram showing the circular arrangement of LEDs on the R2 fixture head, numbered 1 through 19 in a specific order for programming.

Installation

DMX Cable Pin-Outs and Termination

Depending on the length of the DMX cable run, or other factors, it may be advisable to install a terminator at the last fixture in the run. The illustration below shows the correct placement of a 120 Ω 0.25W resistor in a terminator, as well as the standard DMX signal pin-outs.

Diagram illustrating DMX 3-pin and 5-pin connector pin-outs for DMX Input and Output, showing connections for COMMON, DMX-, and DMX+. A separate illustration shows a 120 1/4W resistor used as a terminator.

Installation

Diagram showing the fixture mounted on a truss. Components illustrated include a clamp, Omega bracket, and safety cable.

For more information, visit www.eklights.com.

Safety

General Instruction

  • The products referred to in this manual conform to the European Community Directives and are therefore marked with ©.
  • The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only. Never make any modifications on the unit not described in this instruction manual, otherwise you will risk an electric shock.
  • Connection must be made to a power supply system fitted with efficient earthing (Class I appliance according to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
  • The connection to the main network of electric distribution must be carried out by a qualified electrical installer. Check that the main frequency and voltage correspond to those for which the unit is designed as given on the electrical data label.
  • This unit is not for home use, only professional applications.

Conditions to Avoid

  • In places subject to vibrations or bumps;
  • In places with a temperature of over 40 °C.

General Precautions

  • Make certain that no inflammable liquids, water or metal objects enter the fixture.
  • Do not dismantle or modify the fixture.
  • All work must always be carried out by qualified technical personnel. Contact the nearest sales point for an inspection or contact the manufacturer directly.
  • If the unit is to be put out of operation definitively, take it to a local recycling plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

  • If this device will be operated in any way different to the one described in this manual, it may suffer damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short circuit, burns, electric shock, etc.
  • Before starting any maintenance work or cleaning the projector, cut off power from the main supply.
  • Always additionally secure the projector with the safety rope. When carrying out any work, always comply scrupulously with all the regulations (particularly regarding safety) currently in force in the country in which the fixture's being used.
  • Install the fixture in a well ventilated place.
  • Keep any inflammable material at a safe distance from the fixture.
  • Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent that their effectiveness is impaired.
  • The lamp (LED) shall be changed if it has become damaged or thermally deformed.
  • Never look directly at the light beam. Please note that fast changes in lighting, e.g. flashing light, may trigger epileptic seizures in photosensitive persons or persons with epilepsy.
  • Do not touch the product’s housing when operating because it may be very hot.

Maintenance

Maintenance and Cleaning the Unit

  • Make sure the area below the installation place is free from unwanted persons during setup.
  • Switch off the unit, unplug the main cable and wait until the unit has cooled down.
  • All screws used for installing the device and any of its parts should be tightly fastened and should not be corroded.
  • Housings, fixations and installation spots (ceiling, trusses, suspensions) should be totally free from any deformation.
  • The main cables must be in impeccable condition and should be replaced immediately even when a small problem is detected.
  • It is recommended to clean the front at regular intervals, from impurities caused by dust, smoke, or other particles to ensure that the light is radiated at maximum brightness. For cleaning, disconnect the main plug from the socket. Use a soft, clean cloth moistened with a mild detergent. Then carefully wipe the part dry. For cleaning other housing parts use only a soft, clean cloth. Never use a liquid, it might penetrate the unit and cause damage to it.

Troubleshooting

Problems Possible Causes Checks and Remedies
Fixture does not light up No mains supply Check the power supply voltage
Dimmer fader set to 0 Increase the value of the dimmer channels
All color faders set to 0 Increase the value of the color channels
Faulty LED Replace the LED board
Faulty LED board Replace the LED board
General low light intensity Dirty lens assembly Clean the fixture regularly
Misaligned lens assembly Install lens assembly properly
Fixture does not power up No power Check for power on power outlet
Loose or damaged power cord Check power cord
Faulty internal power supply Replace internal power supply
Fixture does not respond to DMX Wrong DMX addressing Check control panel and unit addressing
Damaged DMX cables Check DMX cables
Bouncing signals Install terminator as suggested

Contact an authorized service center in case of technical problems or issues not reported in the table. These cannot be resolved by the procedure given in the table.

Models: R2, 20, R2 Beam Wash Light, Beam Wash Light, Wash Light, Light

File Info : application/pdf, 36 Pages, 3.63MB

PDF preview unavailable. Download the PDF instead.

R2 User-Manual Adobe PDF library 15.00 Adobe Illustrator CC 23.0 (Windows)

Related Documents

Preview Ksmart 600W LED Moving Head User Manual
Comprehensive user manual for the Ksmart 600W LED Moving Head lighting fixture, manufactured by EK Lights. Includes specifications, installation, operation, DMX chart, and maintenance information.
Preview EK R3 RGBW Beam Wash User Manual - Features, Specs, and Operation
Comprehensive user manual for the EK R3 RGBW Beam Wash lighting fixture. Details features, specifications, DMX control, installation, and troubleshooting for professional stage and event lighting.
Preview EK Ratel Moving Head Beam Light User Manual
Comprehensive user manual for the EK Ratel moving head beam light, detailing safety instructions, technical specifications, installation, operation, and troubleshooting.
Preview EK Apollo LED Uplight User Manual | Wireless DMX, Battery Powered
Explore the EK Apollo, a professional outdoor-rated, battery-powered LED uplight with wireless DMX and infrared control. This user manual details features, specifications, and operation for event and stage lighting.
Preview EK Blinder III C User Manual
User manual for the EK Blinder III C lighting fixture, covering safety, specifications, installation, operation, DMX charts, and maintenance.
Preview EK MC15 1500W IP66 LED Moving Profile Light - Datasheet
Technical specifications and features of the EK MC15, a 1500W IP66 rated LED moving profile light with a 4-in-1 Beam, Spot, Wash, and Profile function. Details include photometry, key features, color system, control, power, and physical dimensions.
Preview EK EC 60 User Manual
User manual for the EK EC 60 lighting fixture, detailing its features, specifications, installation, operation, and troubleshooting.
Preview EK-Quantum Vector² FTW3 RTX 3080/90 D-RGB GPU Water Block User Guide
Comprehensive user guide for installing the EK-Quantum Vector² FTW3 RTX 3080/90 D-RGB GPU water block. Includes box contents, dimensions, technical specifications, installation steps, warranty, and support information.