VEVOR P8100 MUG HEAT PRESS MACHINE

Product Specifications

Contact Information

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

E-mail: CustomerService@vevor.com

MUG TRANSFER STEPS

(Reference: temperature 180°C, time 180s)

Note: When unplugging the aviation connector and the countdown cable, the machine must be powered off.

1. In the power-off state, unplug the aviation connector and the countdown cable on the main machine.

   Image Description: Close-up view of the aviation connector and countdown cable on the main machine, with VEVOR branding visible.

2. Plug in the aviation connector and countdown line on the mug printing machine.

   Power on the machine and set the time and temperature.

   Image Description: The mug heat press machine is connected to the main unit via the aviation connector and countdown line. The machine is powered on, displaying settings for time and temperature.

3. Stick the printed picture on the mug.

   Image Description: A printed design on transfer paper is shown next to a blank white mug.

4. Put the mug into the machine and adjust the pressure. When the temperature is reached, press the handle and the machine starts to work.

   Image Description: A mug is placed inside the heat press element. A hand is shown pressing down the handle to engage the machine. The digital display shows temperature and time.

5. When the countdown is over, take out the mug and tear off the picture attached to the mug, and the transfer of the mug is completed.

   Image Description: A finished mug with the transferred design is shown, indicating the transfer process is complete.

HOW TO REPLACE THE HEATING ELEMENT?

Notice: The edge of the heating element is thin and sharp, please wear gloves when replacing it to avoid cutting your hand.

1. Unscrew the 4 screws on the machine.

   Image Description: Close-up view showing four screws on the machine that need to be unscrewed to remove the heating element. Yellow circles highlight the screws.

2. Take out the heating element.

   Image Description: Hands are shown carefully removing the old heating element from the machine.

3. The heating element removal is complete!

   Image Description: The heating element has been successfully removed from the machine, with the four screws placed nearby.

PREPARE HEATING ELEMENT FOR REPLACEMENT

Image Description: A new mug heating element, a curved metal component with internal heating material and a connecting cable, is shown.

1. Put in heating element.

   Image Description: Hands are shown inserting the new heating element into the machine.

2. Tighten the 4 screws.

   Image Description: Hands are shown tightening the four screws to secure the new heating element.

3. The installation is complete.

   Image Description: The mug heat press machine with the new heating element installed is shown, indicating the installation is complete.

DISPOSAL

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through [waste-disposal-symbol] indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

European Representative (EC REP)

EUREP GmbH

Unterlettenweg 1a, 85051 Ingolstadt

Germany

E-mail: eurep@eurep-gmbh.com

Phone: +49 841 8869 7744

United Kingdom Representative (UK REP)

Acumen IBC Ltd

Ground Floor, 94 Ock Street, Abingdon, OX14 5DH

Richard Kupce

E-mail: info@ukacumen.com

Phone: +44 1235 200526

Manufacturer

Yiwu Sunmeta Technology Co., Ltd

ADD: NO. 5 Xinpan Road, Shangxi Town, Yiwu City, Zhejiang Province, China

Made in China

Customer Support

E-mail: CustomerService@vevor.com