Manuals+

T290 (Propel Model) Quick Guide

This guide is intended for quick consultation only and does not replace the user and maintenance manual. Before using the machine, read the user and maintenance manual contained in the machine's packaging thoroughly and strictly follow all the instructions.

PREPARATION & OPERATION

  1. Fill the water tank (H₂O) and the chemical tank (CHEM).
  2. Connect the battery.
  3. Connect the power cord.
  4. Connect the hose.
  5. Turn the machine ON ▶️.
  6. Adjust the brush pressure.
  7. Lower the brush head.
  8. Select AUTO mode.
  9. Move the machine forward ➡️.

ATTACHING/REMOVING THE BRUSHES

Attaching the brush: Rest the brush on the floor in front of the machine and centre it with the guard. Lower the head and operate the brush/drive lever repeatedly until the brush automatically engages on the flange hub. If the operation is not successful, repeat by pressing on the lever again and repeating the centring.

Removing the brush: Raise the machine head by pushing the head lift pedal down and then to the right, and operate the brush/drive lever repeatedly. After operating the lever a few times, the brush is released and falls to the ground.

DAILY MAINTENANCE

  • Clean the dirty water tank.
  • Check the suction filter is undamaged and clean.
  • Check that the detergent outlet filter is clean.
  • Check that the brush is clean. Replace if necessary ✔️.
  • Check that the squeegee is clean and the blades are not worn.

BATTERY CHARGER ON BOARD

The battery charger on board features a connection port and a filter indicator.

REPLACING THE SQUEEGEE BLADES

Open the clip (Ref. 1).

Remove the two blade retainers (Ref. 2) by pushing them outwards then extracting them.

Remove the blade.

Reuse the same blade by reversing the edge in contact with the floor until all four edges are worn out, or replace with a new blade, fitting it onto the screws on the body of the squeegee.

Reposition the two blade pressing devices by centering the wider part of the slots on the squeegee body fastening pins, then push the blade pressing devices inwards.

Close the hook again.

Replace the squeegee on its support, following the instructions described previously.

Models: T290, Walk Behind Floor Scrubber, T290 Walk Behind Floor Scrubber, T290 Wall Chart

PDF preview unavailable. Download the PDF instead.

pldc04436 Adobe PDF Library 15.0

Related Documents

Preview Tennant T290 Parts Manual: Battery Floor Scrubber Components and Diagrams
Explore the official Tennant T290 Parts Manual. Find detailed diagrams, part numbers, and specifications for the Tennant T290 Battery Floor Scrubber (Propel Model) to ensure efficient maintenance and repair.
Preview Tennant CS5 Floor Scrubber Quick Start Guide | Operation and Maintenance
Concise guide for the Tennant CS5 Floor Scrubber, covering quick setup, operation, and basic maintenance. Learn how to use your Tennant CS5 efficiently.
Preview Tennant T390 Quick Guide - Floor Scrubber Operation and Maintenance
A concise quick guide for the Tennant T390 walk-behind floor scrubber, detailing preparation, operation steps, daily maintenance checks, and instructions for replacing squeegee blades.
Preview Tennant T290 (Push Model) Quick Guide
A concise quick guide for operating and maintaining the Tennant T290 push model floor scrubber, including preparation, daily checks, and brush/squeegee replacement.
Preview Tennant T500 Parts Manual | Walk-Behind Floor Scrubber
Official parts manual for the Tennant T500 walk-behind floor scrubber, detailing components, part numbers, and ordering information for North America and International markets. Features include Hygenic® Recovery Tank and Smart-Fill™ Automatic Battery Watering.
Preview Tennant T291 Push Floor Scrubber Quick Guide
Concise, step-by-step guide for operating the Tennant T291 Push Floor Scrubber, covering setup, modes, and basic maintenance.
Preview T360 Walk-Behind Scrubber Operator Manual
Operator manual for the Tennant T360 Walk-Behind Floor Scrubber, detailing operation, maintenance, safety instructions, and specifications for commercial indoor floor cleaning.
Preview Tennant T981 Rider Floor Scrubber Parts Manual
This official Tennant T981 Parts Manual provides comprehensive diagrams and lists of genuine replacement parts for the T981 Rider Floor Scrubber, including both 90cm Disk and 75cm Cylindrical Brush models. Essential for maintenance and repair, ensuring optimal performance and longevity of Tennant cleaning equipment.