TOA HX-5W Speaker System
Datasheet
Product Overview
The TOA HX-5W is a 2-way compact speaker system designed for indoor use. It offers constant directivity control over a wide frequency range and allows for changes in directivity. This makes it ideal for reproducing clear sound in environments with long reverberation times or high background noise levels.
Image of the TOA HX-5W speaker system, showing a stack of four modular units.
Key Features
- Power handling: 600W Continuous Program @ 8 ohms
- Speaker Configuration: One module comprises 1 x 4.72" (12 cm) cone-type LF driver and 3 x 1" balanced dome tweeters.
- Adjustable Dispersion Angle: Selectable vertical dispersion angles of 15°, 30°, 45°, and 60°.
- Stacking Capability: Maximum of four speaker units can be stacked.
Specifications
| Specification | Details |
|---|---|
| Enclosure | Bass-reflex type |
| Power Consumption | Continuous pink noise: 200 W, Continuous program: 600 W |
| Impedance | 8 Ω |
| Sensitivity | 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode) |
| Frequency Response | 70 Hz - 20 kHz (-10 dB) (60° mode), 75 Hz - 20 kHz (-10 dB) (45° mode), 80 Hz - 20 kHz (-10 dB) (30° mode), 85 Hz - 20 kHz (-10 dB) (15° mode) |
| Crossover Frequency | 4 kHz |
| Directivity Angle | Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1.2 kHz), 30° (over 1.6 kHz), 15° (over 3.2 kHz) variable |
| Speaker Component | Low frequency: 12 cm cone-type x 4, High frequency: Balanced dome-type x 12 |
| Input Terminal | Speakon NL4MPXX x 2 and M4 screw terminal |
| Finish | Enclosure: Polypropylene, white Punched net: Surface-treated steel plate, white |
| Dimensions (W x H x D) | 408 mm x 546 mm x 342 mm (16.1" x 21.5" x 13.5") |
| Weight | 16 kg (35.3 lbs) |
| Included Accessories | Hanging bracket x 2, Hex. wrench x 1 |
| Optional Accessories | Matching transformer: MT-200 Speaker mounting brackets: HY-PF1W, HY-CW1W, HY-WM1W, HY-WM2W, HY-CN1W Speaker stand adapter: HY-ST1 |
Dimensions and Mounting
Detailed dimensional information and mounting configurations are provided:
Overall Dimensions
- Top View: Shows the width (408 mm) and depth (342 mm) with mounting points.
- Front View: Shows the height (546 mm) and the arrangement of four 4.72-inch (12 cm) cone-type low-frequency drivers.
- Side View: Shows the depth (342 mm) and the angled front baffle.
- Rear View: Shows mounting points, including 6 x M8 threaded holes for optional bracket mounting and two Speakon NL4MPXX connectors.
Directivity Angle Examples
Diagrams illustrate the speaker configurations for various vertical dispersion angles:
- 45° mode: 342 mm width.
- 30° mode: 339 mm width.
- 15° mode: 336 mm width.
- Mixed angle mode: The angle between successive speaker modules can be adjusted in four steps individually.
Hanging Bracket Mounting
The speaker can be mounted using the accessory hanging bracket in two orientations:
- Hanging vertically: Dimensions shown are 445 mm (width) x 490 mm (height).
- Hanging horizontally: Dimensions shown are 387 mm (width) x 449 mm (height).
Direct Wall Mounting Examples
Diagrams show the speaker mounted directly to a wall:
- When the speaker is set vertically (60° mode): Dimensions for wall mounting are 408 mm (width) x 546 mm (height), with specific bracket hole placements indicated.
- When the speaker is set horizontally (60° mode): Dimensions for wall mounting are 546 mm (width) x 408 mm (height), with specific bracket hole placements indicated.
Note: The rear bracket can be rotated 90°.
Related Products and Accessories
The following TOA models are mentioned:
- Loudspeaker: TOA HX-5B / HX-5W
- Subwoofer: TOA FB-120B / FB-120W
- Indoor connection bracket: TOA HY-CN1B / HY-CN1W
- Ceiling mount bracket: TOA HY-CW1B / HY-CW1W
- Pre-install rigging frame: TOA HY-PF1B / HY-PF1W
- Stand adapter: TOA HY-ST1
- Wall/ceiling mounting bracket: TOA HY-WM1B / HY-WM1W
- Wall/ceiling direct mounting bracket: TOA HY-WM2B / HY-WM2W
- Matching transformer: TOA MT-200
