TOA SR-F08 2-Way Passive Speaker System
The SR-F08 is a 2-way passive speaker system designed for indoor use. Its properly-designed built-in passive network provides high-quality sound and high output capability. The speaker can be used for many applications as permanent and temporary installations.
Key Features
- Powerful, passive 2-way speaker system
- Supported by a comprehensive range of mounting accessories to set up the speaker system in both fixed and mobile installations
- The horn can be rotated 90 degrees to be mounted either horizontally or vertically, depending on the application
- Compact and stylish trapezoidal enclosure to fit in everywhere
- Die-casting aluminum speaker frame to have good stiffness and strength-to-weight ratio
- Birch plywood to minimize the resonance of the enclosure itself
- Polyurea coating to protect the surface of the speaker well
- Used as main speakers in small or medium-sized auditoriums and conference rooms
- Used as auxiliary speakers in large music halls and houses of worship
Specifications
| Specification | Details |
|---|---|
| System Type | 2-way, Passive type, Bass-reflex type |
| Power Handling | Continuous pink noise: 120 W Continuous program: 360 W |
| Rated Impedance | 8 Ω |
| Sensitivity | 91 dB (1 W, 1 m) |
| Frequency Response | 65 Hz - 20 kHz |
| Crossover Frequency | 1.5 kHz |
| Directivity Angle | Horizontal: 90°, Vertical: 60° (Horn at 90° Rotation, Horizontal: 60°, Vertical: 90°) |
| Speaker Component | Low frequency: 20 cm (8") cone-type High frequency: Compression driver fitted with CD horn |
| Input Terminal | Neutrik NL4MPXX x 2, M4 screw terminal, distance between barriers: 11 mm (0.43") |
| Finish | Enclosure: Birch plywood, black, polyurea coating Grille: Steel plate, black, 40 % gloss, paint |
| Dimensions | 249 (W) x 450 (H) x 243 (D) mm (9.8" x 17.72" x 9.57") |
| Weight | 11 kg (24.25 lb) |
| Optional Accessories | Speaker mounting bracket: HY-B0801, HY-UH08, HY-UV08 |
Dimensions and Diagrams
Diagrams illustrating the physical dimensions and connection details of the TOA SR-F08 speaker. Views include Front, Side, Rear, and Bottom, with measurements provided in millimeters and inches. The front view indicates the horn can be rotated 90 degrees. The rear view shows input connectors. An internal connection diagram details the wiring for two Neutrik NL4MPXX connectors and screw terminals, specifying polarity (+/-) for speaker output.
A&E Specifications
The 2-way passive loudspeaker shall consist of an 8 inches (20cm) low frequency transducer and a single high frequency compression driver with CD horn that can be rotated to allow dispersion angles of 90° horizontally and 60° vertically, or 60° horizontally and 90° vertically with a crossover point of 1.5 kHz. System frequency response shall be from 65 Hz to 20 kHz measured on axis. The loudspeaker shall produce a Sound Pressure Level (SPL) of 91 dB on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing 360 watts of continuous power and have a nominal impedance of 8 Ohms. The input connectors, located on the rear of the enclosure, shall be two Neutrik NL4 MP and two screw-type barrier strips. The cabinet shall allow the deployment of a wide range of brackets to achieve optimal coverage angles from ceilings, walls, pipes, and speaker stands. The loudspeaker enclosure shall be trapezoidal in shape and will be of a birch plywood construction with an impact-protected PCP (Polyurea Cabinet Protection) black finish with a steel front grille measuring 249 (w) x 450 (h) x 243 (d) mm (9.8" x 17.72" x 9.57"). The weight of the loudspeaker shall be 11 kg (24.25 lb.)
Optional extras include speaker mounting brackets: HY-B0801, HY-UH08, HY-UV08; Ceiling mount bracket: HY-C0801; Speaker wall mount bracket: HY-WM08, HY-W0801; and Speaker stand: ST-34B.
Manufacturer: TOA Corporation
Model: SR-F08
