Avantco KMC-500-B3F 30" Air Cooled Modular Full Cube Ice Machine with Bin - 497 lb.
Item #: 194KMC500B3F
Product Overview
Make sure you've always got plenty of fresh ice on hand with the Avantco Ice KMC-500-B3F 30" air cooled modular full cube ice machine with bin! Capable of producing up to 497 lb. of full cube ice per day, you'll always have plenty of ice to serve on demand at your restaurant, bar, or cafe. An included ice bin holds up to an impressive 375 lb. of ice, making it ideal for busy establishments that can not afford long periods of down-time while ice is being made. Also included is an ice scoop and a hook to hang it on so it is always within convenient reach when you need it.
For ease of maintenance, a built in diagnostic system will identify problems that your ice machine may be having and will display the issue on the digital controller so it can be repaired accordingly. This easy-to-use controller can also be used to monitor the current stage of ice production that your machine is in. It allows you to adjust the bridge thickness up or down to maximize your harvest into individual cubes of ice, rather than full sheets. It also initiates the cleaning cycle and displays what stage of the cycle you're in. Constructed of durable type 304 stainless steel with a polyethylene interior, this unit is built to last in the busiest commercial environments. A nickel plated evaporator and removable air filter make for quick and simple cleaning and maintenance. With (4) 6" adjustable legs, you can level your machine on uneven surfaces and have plenty of room to clean under it. This ice machine also comes with pre-drilled holes on the back of the unit to mount your OceanLoch+ water filter to the machine to ensure you are serving the cleanest and freshest ice possible. Designed for side-breathing and rear exhaust, you can avoid hot air being blown outward into your kitchen or service area. This unit requires a 115V electrical connection for operation.
Technical Data
| Specification | Value |
|---|---|
| Width | 30 Inches |
| Depth | 32 11/16 Inches |
| Height | 67 11/16 Inches |
| Amps | 13.5 Amps |
| Hertz | 60 Hz |
| Phase | 1 Phase |
| Voltage | 115 Volts |
| 24 Hour Ice Yield | 497 Pounds |
| Ambient Temperature Range | 40-90 Degrees F |
| Bin Storage Capacity | 375 lb. |
| BTU Per Hour | 3798 BTU |
| Condenser Type | Air Cooled |
| Ice Type | Full Size Cubes |
| Installation Type | Modular |
| Material | Stainless Steel |
| Plug Type | NEMA 5-15P |
| Power Usage | 4.7 kWh per 100 lbs. |
| Refrigerant Type | R-290 |
| Type | Ice Machines with Bins |
| Water Inlet Size | 3/4 Inches |
| Water Pressure Range | 18 3/4 - 80 PSI |
| Water Temperature Range | 40 - 90 Degrees F |
| Water Usage | 13.6 Gallons Per 100 lbs. |
Visual Description
The main image depicts a person interacting with the Avantco KMC-500-B3F ice machine. The machine is a large, modular unit with a stainless steel exterior and a clear ice bin. Smaller inset images show the machine from front, side, and top perspectives. Dimensional drawings are also provided, illustrating front, side, and top views with key measurements.
Certifications & Connections
- ETL Sanitation ?
- ETL, US & Canada ?
- Water Connection: 3/4" ?
- Plug Type: NEMA 5-15P ?
Important Information
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
