DeLonghi 360° Oscillation Axial Pedestal Fan

Consumer Helpline

Australia
Phone: 1800 126 659
Fax: 1800 007 289
Website: www.delonghi.com.au

New Zealand
Phone: 0508 200 300
Fax: 0508 200 301
Website: www.delonghi.co.nz

Distributed by De'Longhi Australia Pty Ltd. ABN 49 104 012 857. P.O. Box 4540 Casula Mall, NSW 2170

Distributed by De'Longhi New Zealand Ltd. NZBN 9429035952824. P.O. Box 58-056 Botany, MANUKAU 2163

DeLonghi is a registered Trademark of De'Longhi Australia Pty Ltd. ABN 49 104 012 857. ©2017 De'Longhi Australia Pty Ltd.

Product Details

Model: DEAPF40.BK, DEAPF40.WH

Description: A 360° Oscillation Axial Pedestal Fan.

Visual Description: The product is a sleek, modern pedestal fan with a round base, adjustable height pole, and a circular fan head with a protective grille. It features a control panel on the fan body and comes with an infrared remote control.

Safety Guidelines

General Safety

• Read these instructions carefully and retain for future reference.
• Remove all packaging and any labels.

Fundamental Safety Warnings

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervised or instruction concerning use of the appliance in a safe way and understand the hazards involved by a responsible person for their safety.
• Young children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• Ensure that the fan is switched off from the supply mains before removing the guard for cleaning.
• Misuse of your appliance can result in injury.

For European Market Only

• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children less than 8 years.
• Children from 8 years and above can use, clean and perform user maintenance on this appliance in accordance with the User Instructions provided they are supervised by a person responsible for their safety and have been given instruction concerning the use of the appliance and are aware of the hazards.
• For indoor use only. Rain and water are dangerous in the presence of electricity.
• Use on stable horizontal surfaces only to avoid fan tipping over.

Before Plugging In

• Make sure your electricity supply is the same as the one shown on the rating label.
• Please ensure the socket's power is over 10Amps / 240V and the voltage should meet the requirements on the rating label.
• Do not operate or plug in the fan with wet hands.
• Ensure the plug is plugged in the socket completely.
• If the fan does not rotate or with abnormal smell, immediately unplug the fan and contact service center for repair.
• Do not place heavy objects on the power cord, it will damage the cord.
• If the plug or the power cord is damaged, it will result in short circuit and may lead to electric shock or fire. Please unplug the fan and call service center for repair. These parts must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• Do not use pesticides and flammable sprays around the product, it may cause product damage.
• Do not put any foreign object in the fan.
• Do not spill liquid on the fan, it will lead to short circuit and damage the fan.
• Do not use the fan around a tub, sprinkler or pool, it will lead to short circuit and damage the fan.
• Do not leave the fan unattended. Please turn the fan off when you go out.
• Do not pull the power cord to unplug the fan, it will damage the cord.

Features

• 4 Horizontal oscillation settings for your comfort: 60°, 90°, 180°, 360°.
• 4 Timer settings: 1, 2, 4, 8 Hours.
• 3 fan speeds.
• 3 wind modes: Normal, Nature, and Sleep.
• LED display with Infrared remote control.
• Vertical oscillation settings: -10°, 0°, 20°, 30°, 40°, 50°, 60°, 70°, 80°, 90°.

Service and Customer Care

• If the cord is damaged, it must, for safety reasons, be replaced by DeLonghi or an authorized DeLonghi repairer.
• If you experience any problems with the operation of your appliance, before requesting assistance, please visit www.delonghi.com.
• Your product is covered by a warranty, which complies with all legal provisions concerning any existing warranty and consumer rights in the country where the product was purchased.
• If your DeLonghi product malfunctions or you find any defects, please send it or bring it to an authorized DeLonghi Service Centre. To find up-to-date details of your nearest authorized DeLonghi Service center visit www.delonghi.com.
• Made in China.

Parts Drawing

Visual Description: An exploded view diagram shows the components of the pedestal fan. The main parts are labeled with numbers:

• 1. Front guard
• 2. Spinner
• 3. Fan blade
• 4. Rear guard nut
• 5. Rear guard
• 6. Screw for guards
• 7. Fan body
• 8. Stand fixing screw
• 9. Stand post
• 10. Base fixing screw

Visual Description: A 'Display panel' diagram illustrates icons for Timer, Oscillation angles, and Modes (Normal, Nature, Sleep) with speed indicators (Low, Medium, High).

Visual Description: A 'Control panel' diagram shows buttons for Timer, Swing, Mode, Fan Speed, and On/Off, along with indicators for oscillation angles and fan speed.

Remote Control Panel

Visual Description: The remote control panel diagram shows buttons for Fan speed, Mode, Left/Right oscillation, Timer, and On/Off. It also indicates oscillation angles and timer functions.

Installation & Operation Instructions

Installation

1. Take out parts for assembling: check that the manual, remote control, and spare parts are all packed.
2. Assemble the fan as showing and indication below:
1. Put the column through the hole of the base, and fix tightly by screw (Refer to Figure 1).
2. Put the fan body on the column, and fix by the nut (Refer to Figure 2).
3. Put the rear grill on the rear cover of motor, align the hole on the grill, and fix by the grill nut (Refer to Figure 3).
4. Fit the fan blade on the motor axes, tightly fixing by blade screw (Refer to Figure 4).
5. Assemble grill ring and front grill up together with the rear grill, and tighten the grill ring with the lock on the bottom (Refer to Figure 5).
6. After assembly, plug in power and use it as the manual (Refer to Figure 6).

Operation

All functions can be operated by pressing the buttons on the control panel or using the remote control.

1. ON/OFF: When first plugged in, the fan will "beep" twice, then the fan is in standby mode. You may turn on the fan and start setting.
2. SPEED: Press the "SPEED" button to set the fan speed. LED lights will change accordingly.
3. SWING:
   • Vertical Oscillation: Manual adjustment of vertical oscillation angles from -10°, 0°, 10°, 20°, 30°, 40°, 50°, 60°, 70°, 80°, 90°.
   • Horizontal Oscillation: Press and hold the left button [<<<] to turn counter-clockwise, or the right button [>>>] to turn clockwise. Release the button when the desired direction is reached. Horizontal oscillation angles can be set to 0°, 60°, 90°, 180°, 360°. LED lights will change accordingly.
4. MODES: The fan defaults to Normal mode. Pressing the MODE button cycles through Normal, Nature, and Sleep modes. LED lights indicate the selected mode.
   • Normal Mode: Choice of constant high, middle, and low fan speed.
   • Nature Mode: Choice of high, medium, and low fan speed in a rhythmic pattern. Visual descriptions of waveform patterns are provided.
   • Sleep Mode: Choice of high and medium fan speed. High speed starts with 30 minutes of Nature mode high waveform, followed by 30 minutes of Nature mode medium waveform, then Nature mode low waveform. Medium speed starts with 30 minutes of Nature mode medium waveform, followed by Nature mode low waveform. Low speed is Nature mode low waveform.
5. TIMER: Pressing the TIMER button allows selection of 1H, 2H, 4H, and 8H timer settings. The fan will automatically turn off after the set time.

Usage for Remote Control

Battery Warning

WARNING - KEEP BATTERIES OUT OF REACH OF CHILDREN: Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the oesophagus.

Examine devices and make sure the battery compartment is correctly secured. Do not use if compartment is not secure.

Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.

Battery Installation

This product requires a button cell battery to operate, which is hazardous to young children.

The remote control has a battery compartment that requires two or more independent and simultaneous actions to remove its cover. Press and pull out the battery compartment on the back of the remote control. Install the button cell (CR2032 3V) according to the positive [+] and negative [-] signs and close the compartment. Align the remote control with the receiver on the fan to operate.

Visual Description: A diagram shows a button cell battery (CR2032 3V) and the remote control's battery compartment with instructions to press and pull.

Clean & Maintenance

Clean

• It is suggested to clean the dust from the fan once a month.
• Always unplug the fan before cleaning.
• Use a dry, soft cloth to wipe the outer parts. Do not use corrosive detergents or solvents, gasoline, thinner, or benzene on this fan.

Product Storage

• If the fan will not be used for a long time, unplug it and pack it to prevent dust from entering the fan body.
• Store the fan in a cool, dry place.