IKEA TONSTAD Table Assembly Instructions
Parts List
The following components and hardware are included for the assembly of the TONSTAD table:
- Part 10116225: 4 pieces (Likely tabletop components or related parts)
- Part 130886: 8 pieces (Leg components)
- Part 130884: 8 pieces (Leg components)
- Part 100712: 8 pieces (Hardware)
- Part 100843: 8 pieces (Hardware)
- Part 110912: 4 pieces (Support components)
- Part 120202: 4 pieces (Support components)
- Part 154409: 14 pieces (Hardware/Connectors)
- Part 100038: 16 pieces (Hardware)
- Part 101350: 8 pieces (Hardware)
- Part 107271: 4 pieces (Hardware/Brackets)
Please verify all parts are present before beginning assembly.
Assembly Steps
Step 1
The initial diagram shows the main tabletop component (part 10116225) and various hardware and leg components laid out. This step is for preparation and identification.
Step 2
Attach the leg assemblies. The diagram shows four instances of part 130886 and four instances of part 130884 being connected to the underside of the tabletop (part 10116225). This suggests the legs are formed from these components.
Step 3
Secure the leg assemblies. The diagram indicates the use of 8 pieces of part 101350 hardware to fasten the leg components.
Step 4
Connect support structures. The diagram shows the attachment of 14 pieces of part 154409, likely acting as connectors or brackets, to the leg assemblies.
Step 5
Further structural support is added. The diagram illustrates the use of 4 pieces of part 110912 and 4 pieces of part 120202, likely connecting the legs or providing additional bracing.
Step 6
Reinforce the table structure. The diagram shows the use of 16 pieces of part 100038 hardware for securing various connections.
Step 7
Attach stabilizing elements. The diagram indicates the use of 4 pieces of part 107271, which appear to be brackets or corner supports.
Step 8
Final connections are made. The diagram shows the use of 4 pieces of part 100712 and 4 pieces of part 100843 hardware to complete the main assembly.
Step 9
The diagram shows the table from a different angle, highlighting the assembled leg and support structure. No new hardware is explicitly shown being added in this visual.
Step 10
Another perspective of the assembled table, focusing on the overall structure and stability. This step visually confirms the correct assembly of previous steps.
Step 11
The diagram provides a close-up view of a connection point, demonstrating how parts are integrated for strength and stability.
Step 12
The final diagram shows the completed TONSTAD table, indicating that the assembly process is finished. A final check for stability is recommended.
