SANDSBERG Table Underframe Assembly Instructions
Product by IKEA
Product Overview
This document provides assembly instructions for the SANDSBERG table underframe from IKEA.
Parts and Tools Required
| Icon/Image Representation | Description | Part Number | Quantity |
|---|---|---|---|
| ? | Screw | 100241 | 10x |
| ? | Bolt | 131128 | 4x |
| ⚪ | Washer | 100843 | 4x |
| [Clamp] | Clamp | 131337 | 4x |
| ? | Allen Key | 108490 | 1x |
| ?️ | Wrench | 128632 | 1x |
Important Assembly Notes:
- ❌ Do not force parts.
- [Assemble on floor] Assemble on a soft surface like a rug to prevent scratches.
- [Assembly help needed] If you encounter difficulties, refer to the steps or contact IKEA support.
- ? For assistance, contact IKEA customer service.
Assembly Instructions
Step 1: Assemble the Frame
Connect the four main frame pieces to form a rectangle. Insert and tighten 10 screws (100241) using the Allen key (108490).
Step 2: Attach Clamps
On the underside of the assembled frame, attach the four clamps (131337) into their designated slots.
Step 3: Secure Frame to Tabletop Support
Place the assembled frame onto the tabletop support (not shown). Secure the frame using 10 screws (100241) and the Allen key (108490).
Step 4: Attach Legs
Attach the four legs to the underside of the frame. For each leg, use one bolt (131128) and one washer (100843). Tighten initially with the wrench (128632).
Step 5: Final Tightening of Legs
Ensure all four legs are securely tightened using the wrench (128632). The table is now assembled.
ℹ️ [Do not discard tools] Do not discard the provided tools until assembly is complete.
Maintenance
For increased stability, re-tighten the screws about two weeks after assembly. Make sure they stay tight by checking them a couple of times per year.
