TT80167 INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Min 90°C supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock. ⚡
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
ASSEMBLY AND INSTALLATION
The lamp assembly consists of the following parts:
- (1) Finial
- (2) Shade
- (3) Harp
- (4) Body
- (5) Cord
- (6) Bulb
Follow these steps for assembly:
- Install the bulb (6) into the socket.
- Put the harp (3) on the body (4).
- Put the shade (2) over the harp (3) and secure it with the finial (1).
DO NOT USE BARE HANDS TO TOUCH THE BULB.
Installation is now complete. ✔️
Diagram Description: The diagram shows the components of the table lamp. The finial (1) is at the top, securing the shade (2). The harp (3) supports the shade and connects to the lamp socket. The main body of the lamp (4) contains the electrical components and the power cord (5) exits from the base. A light bulb (6) is shown being screwed into the socket.
