TREND TP30001 Pendant Light Installation Guide
Model: TP30001
Brand: TREND by ACCLAIM LIGHTING
Introduction
Please read these instructions carefully and save them for future reference.
CAUTION
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit conductor. Use minimum 90°C supply conductors.
Turn off the main power at the circuit breaker before installing the fixture to prevent possible shock.
GENERAL
All electrical connections must comply with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and verify that all parts are present by referencing the illustrations in these installation instructions.
ASSEMBLY AND INSTALLATION
- Thread two mounting screws (8) into the mounting bar (9) and secure them with the hex nut (7).
- Secure the mounting bar (9) to the outlet box (1) using the box screws (10).
- Pull the outlet wires and ground wire from the outlet box (1). Make wire connections:
- Connect the ribbed/white wire (without marking) from the light fixture to the white wire (2) from the power source.
- Connect the smooth/black wire (without marking) from the light fixture to the black wire (3) from the power source.
- Loop the ground wire (4) to the mounting bar (9) using a green screw (6).
- Attach the canopy (11) to the outlet box (1) and secure it with the ball nut (12).
- Install the bulb (bulb not included). Do not exceed the maximum wattage recommended for the socket.
- Insert the Lamp Body (14) into the Glass shade (13), then secure the Cap (15) over the Glass (13) using the Finger Nut (16).
INSTALLATION IS NOW COMPLETED.
Diagram Description and Parts List
The following components are illustrated in the diagram:
- 1. Outlet Box: The electrical box mounted in the ceiling.
- 2. White Wire: The neutral wire from the power source.
- 3. Black Wire: The hot wire from the power source.
- 4. Ground Wire: The safety ground wire.
- 5. Wire Connector: Used to join electrical wires.
- 6. Green Screw: Used for connecting the ground wire.
- 7. Hex Nut: A nut used for securing components.
- 8. Mounting Screw: Screws that attach the mounting bar to the outlet box.
- 9. Mounting Bar: A bar that supports the fixture and attaches to the outlet box.
- 10. Box Screw: Screws used to secure the mounting bar to the outlet box.
- 11. Canopy: A decorative cover that hides the outlet box and wiring.
- 12. Ball Nut: A nut used to secure the canopy.
- 13. Glass: The glass shade for the light fixture.
- 14. Lamp Body: The main body of the light fixture that holds the bulb.
- 15. Cap: A component that fits over the glass shade.
- 16. Finger Nut: A nut, often decorative, used to secure the cap.
The assembly process involves attaching the mounting bar to the outlet box, connecting the electrical wires, securing the canopy, and then assembling the lamp body, glass shade, and cap.
